|
[China]
Trade Verify
Address: No.265 of zhongshan road ,shijiazhuang city ,heibei province ,china 050000
Contact name:zhijing.gao
Huihao Hardware Mesh Product Limited |
|
Verified Suppliers
|
|
|
Imperial Thread Flanged Stud Welding Pins specification
| Imperial Thread "D" | Flange Diameter "FD" | Minimum Length "L" |
| 4-40 | 0.187 | 0.312 |
| 6-32 | 0.218 | 0.312 |
| 8-32 | 0.250 | 0.312 |
| 10-32 | 0.250 | 0.312 |
| 10-24 | 0.250 | 0.312 |
| 1/4-20 | 0.310 | 0.375 |
| 5/16-18 | 0.380 | 0.500 |
| 3/8-16 | 0.437 | 0.625 |
Metric Thread Flanged Stud Welding Pins specification
| Metric Thread "D" | Flange Diameter "FD" | Minimum Length "L" |
| M3-0.5 | 5.0 | 6.0 |
| M4-.07 | 6.0 | 8.0 |
| M5-.08 | 7.0 | 8.0 |
| M6-1.0 | 8.0 | 10.0 |
| M8-1.25 | 10.5 | 10.0 |
| M10-1.50 | 11.8 | 16.0 |
No Thread Flanged Stud Welding Pins specification
Diameter "D" | Flange* Diameter "FD" | Minimum Length "L" |
| .115 | .187 | .312 |
| .125 | .187 | .312 |
| .141 | .218 | .312 |
| .156 | .250 | .312 |
| .161 | .250 | .375 |
| .187 | .250 | .500 |
| .215 | .312 | .625 |
| .250 | .312 | .625 |
| .274 | .375 | .750 |
| .312 | .375 | .750 |
| .375 | .437 | .750 |
Materials
Low Carbon Steel
| C - 0.23% max. | P - 0.04% max. |
| Mn - 0.90% max. | S - 0.05% max. |
Stainless Steel AISI grade - 302/304/305 std. Other grades available upon request.
Aluminum ALLOY - 1100 & 5000 seriesOther alloys available upon request.
Brass ALLOY - (lead free) 70-30 std. Other alloys available upon
request.
Mechanical Properties
Low Carbon Steel
Tensile - 60,000 psi (min.)
Yield - 50,000 psi (min.)
Elongation - 20% (in 2 inches)
Stainless Steel
Values for various grades available upon request.
Aluminum / Brass
Values for various alloys available upon request.
Plating
Galvanized and Copper plating are available - Low Carbon Steel
Does not apply to Stainless - Stainless Steel
Annealing
Studs are annealed where required. - Low Carbon Steel / Stainless
Steel
Welding process becomes fast and time saving
Saves material as the component to which the studs are welded is not weakened by drilling
Plate thickness can be reduced
Saves labor increase design and production flexibility
Improved quality and wider choice of metals etc.
