Anping yuanfengrun net products Co., Ltd |
Verified Suppliers
|
|
Stretching Reusable Mine Sand Gravel Vibrating Steel Screen Mesh for Quarry
Crimped wire mesh is a wire mesh product that the wire has been embossed by a ginning machine and then was woven into a metal mesh of different specifications through a new type of woven mesh machine.
Crimped woven wire mesh is made in a variety of materials through crimping mesh machine, a kind of universal wire products with square or rectangular openings.
2. Manufacture Method
The wires are crimped before they are woven. Our weave styles
include, but not limited to, intermediate crimp weave in both W and
F directions, lock crimp weave, flat top crimp weave, and crimp
weave in both W and F directions and intermediate crimp weave in
either W or F direction.
3. Specification
Wire diameter ranges from 1.37mm to 12.7mm, and aperture size 3mm
to 100mm. The width and length of each mesh panel could be
specified by the client.
4. Excellent Features
Screen mesh surface is smooth without snubby phenomena.
Mesh panel is square without obliqueity.
Overall structure is tight without looseness.
Mesh size is uniform with very small tolerance.
Service life is very long.
5. Uses
Quarry Screen Mesh is mainly used for primary filtration of mining,
such as coal, iron ore, stones, etc. And also used in asphalt mixer
equipment, mine vibrating screens, screen decks and trommels.
Below are the popular material chemical composition:
Product Name | Vibrating Screen Mesh |
Material | 65Mn,45#,50#,55#,60#,70#,72A etc |
Wire Diameter | 0.8-12.7mm |
Mesh Hole | 2-100mm,tolerance +-3% |
Certification | SGS standard,ISO9001:2008 |
Angle | 30 degrees, 45 degrees,60 degrees |
Crimped Wire Mesh Shape | v-shaped, u-shaped |
Hook Type | C or U hook for 30°-180° |
Weaving Type | Double crimped, intermediate crimped, flat top crimped, lock crimped |
Mesh Type | Square, rectangular slot, long slot. |
Surface Type | Anti rust oil painted |
Edge Preparation | Plain, bent, reinforced shroud, welded shroud, bolt shroud. |
Double Crimp Woven Wire
Used for medium to heavy wire in relation to screen opening size.
Lock pre-crimp mesh
Unlike plain crimped mesh, lock crimped mesh is characterized by
straight sections of wire connected by a well defined bump at the
wire intersections, such a manner to actually lock the wires
together, offering further assurance of no wire movement. Our lock
crimp wire mesh is good in quality and competitive at price.
Flat Top Woven Wire
Flat top is similar to the lock crimp, but all of its crimping is
offset to one side of the material. This creates a smooth top
surface-with no high points-as all wires are woven on a single
plane. Its bottom side, however, has crimp bumps approximately
twice the height of lock crimp bumps. Flat top was originally
created to allow for the smooth flow of materials over the surface
and provide a flat face for use as backer screens. Flat top is
ideal for aggregate sizing and sorting, agriculture, filtration,
and heat-treating applications.
Intermdiate Crimp Woven Wire
Used in coarse weaves of lighter gauge woven wire to provide
greater stability, tightness of weave and maximum rigidity. Very
common in wire mesh openings larger than 1/2" (12.7mm).