|
[China]
Trade Verify
Address: Wanggezhuang industry,Anping County, Hebei province, China
Contact name:Wu nan
Anping yuanfengrun net products Co., Ltd |
|
Verified Suppliers
|
|
|
AS/NZS 4671standard SL62/SL72/SL82/SL92/SL102/Rl718/Rl818/Rl918/Rl1018/Rl1118/Rl1218 Construction Concrete Reinforcement
Construction reinforcement mesh was made by plain steel wire.It main used on building construction complied with standard AS NZS 4671-2001.
The material is 250N,500N,500L,300E,500E ,the mesh size is 150x150mm, wire diameter is 5.3mm and 4.0mm and the overhang length is in both sides. These specificate is very pouplar in New Zealand civil engineering field.
More features of construction reinforcement mesh and ours as below:
Packing and shipment of construction reinforcement mesh by AS-NZS 4671-2001 standard:
The construction of the reinforcement mesh is made of high-quality low-carbon steel wire, cold-rolled ribbed steel bars or cold-rolled round steel bars for stainless steel wire at right angles to the longitudinal and transverse directions, and all are inserted through the electric welding according to a certain distance. Beforehand, the greasy surface, paint stain, cement slurry and floating skin and rust etc. of the steel bar should be clear and clean. After the processing is completed, the reinforced mesh should be flat, and the surface of the reinforced steel should not be damaged by weakening the cross-section of the reinforced steel. Straighten the steel bar first, and then cut it into steel bars. The scale of the reinforced mesh is summarized and considered according to the distance between the arch and the degree of overlap between the mesh.
The production process of construction reinforcement mesh by AS-NZS 4671-2001 standard:
The specification of construction reinforcement mesh by AS-NZS 4671-2001 standard as below:
| Mesh Type and reference number | Longitudinal bars | Cross-bars | Mass for 6 x2.4 m sheets | Cross-sectional area/m width | ||||
| No.x dia., mm | Pitch@mm | No.x dia., mm | Pitch@mm | Unit area kg/sqm | Sheet, kg | Long'l bars sqmm/m | Cross bars sqmm/m | |
| Squre,with edge side-lapping bars | ||||||||
| SL102 | 10x9.5+ 4x6.75 | 200 100 | 30x9.5 | 200 | 5.6 | 80 | 354 | 354 |
| SL92 | 10X8.6+ 4X6.0 | 200 100 | 30x8.6 | 200 | 4.6 | 66 | 290 | 290 |
| SL82 | 10x7.6+ 4x6.0 | 200 100 | 30x7.6 | 200 | 3.6 | 52 | 227 | 227 |
| SL72 | 10x6.75+ 4x5.0 | 200 100 | 30x6.75 | 200 | 2.8 | 41 | 179 | 179 |
| SL62 | 10x6.0+ 4x5.0 | 200 100 | 30x6.0 | 200 | 2.2 | 33 | 141 | 141 |
| Squre,without edge side-lapping bars | ||||||||
| SL81 | 25X7.6 | 100 | 60x7.6 | 100 | 7.1 | 105 | 454 | 454 |
| Product Code | Std Unit | Longitudinal Wires | Cross Wires | Mass(kg) | Dimensions(m) |
| SL62UTE | Sheet | 8×6@200 | 20×6@200 | 18 | 4×2 |
| SL72UTE | Sheet | 8×6.75@200 | 20×6.75@200 | 23 | 4×2 |
| SL82UTE | Sheet | 8×7.6@200 | 20×7.6@200 | 30 | 4×2 |
| Rectangular Reinforcing Mesh 2.4m*6m=14.4sqm | ||||||
| Code | Cross wire | Longwire mm | Mass/sheetkg | Quantityin pack | ||
| Pitch@mm | No. x dia., mm | Pitch@mm | No. x dia., mm | |||
| RL718 | 7.60 @ 200 | 30 x7.6 | 6.75 @ 100 | 25 x 7.6 | 68 | 20 |
| RL818 | 7.60 @ 200 | 30 x7.6 | 7.60 @ 100 | 25 x7.6 | 79 | 20 |
| RL918 | 7.60 @ 200 | 30 x7.6 | 8.55 @ 100 | 25 x 8.55 | 93 | 20 |
| RL1018 | 7.60 @ 200 | 30 x7.6 | 9.50 @ 100 | 25 x9.5 | 109 | 15 |
| RL1118 | 7.60 @ 200 | 30 x7.6 | 10.65 @ 100 | 25 x10.65 | 131 | 15 |
| RL1218 | 7.60 @ 200 | 30 x7.6 | 11.90 @ 100 | 25 x11.9 | 157 | 10 |
| Reinforcing Mesh | ||||||
| Code | wire diameter | aperture | edge open | width | length | weight per sheet(kgs) |
| F62 | 5mm | 200*200mm | 200mm | 2.4m | 6m | 20.92 |
| F72 | 6mm | 200*200mm | 200mm | 2.4m | 6m | 30.12 |
| F82 | 7mm | 200*200mm | 200mm | 2.4m | 6m | 41 |
| F92 | 8mm | 200*200mm | 200mm | 2.4m | 6m | 53.55 |
| concrete reinforcing mesh specification | ||||||||
| Mesh Type and reference number | Longitudinal bars | Cross-bars | Mass for 6x2.4m sheets | Cross-sectional area/m width | ||||
| No. x dia., mm | Pitch,@mm | No. x dia., mm | Pitch,@mm | Unit area,kg/sqm | Sheet,kg | Long'l bars,sqmm/m | Cross bars,sqmm/m | |
| Structural and skatch | ||||||||
| SE92 | 13 X9.0 | 200 | 30 X9.0 | 200 | 5.0 | 75 | 318 | 318 |
| SE82 | 13 X8.0 | 200 | 30 X8.0 | 200 | 3.9 | 59 | 251 | 251 |
| SE72 | 13 X7.0 | 200 | 30 X7.0 | 200 | 3.0 | 45 | 192 | 192 |
| SE62 | 13 X6.0 | 200 | 30 X6.0 | 200 | 2.2 | 33 | 141 | 141 |
| Non-structural | ||||||||
| SL51.5 | 17 X5.3 | 150 | 40 X5.3 | 150 | 2.2 | 32 | 147 | 147 |
| SL41.5 | 17 X4.0 | 150 | 40 X4.0 | 150 | 1.3 | 19 | 84 | 84 |
| REINFORCING MESH TO AS/NZS4671:2001 / TRENCH MESH | ||||
| Code | STD UNIT | LONGITUDINAL WIRES | CROSS WIRES | MASS / KG |
| L8TM200 | 6 Metre | 3 x 7.60 @ 100 | 4.00 @ 300 | 6.8 |
| L8TM300 | 6 Metre | 4 x 7.60 @ 100 | 4.00 @ 300 | 9.2 |
| L8TM400 | 6 Metre | 5 x 7.60 @ 100 | 4.00 @ 300 | 11.6 |
| L8TM500 | 6 Metre | 6 x 7.60 @ 100 | 4.00 @ 300 | 13.9 |
| L8TM600 | 6 Metre | 3 x 7.60 @ 100 | 4.00 @ 300 | 15.9 |
| L8TM2400 | 6 Metre | 25 x 7.60 @ 100 | 4.00 @ 300 | 72 |
| L11TM200 | 6 Metre | 3 x 10.70 @ 100 | 4.77 @ 300 | 13 |
| L11TM300 | 6 Metre | 4 x 10.70 @ 100 | 4.77 @ 300 | 17.7 |
| L11TM400 | 6 Metre | 5 x 10.70 @ 100 | 4.77 @ 300 | 22.3 |
| L11TM500 | 6 Metre | 6 x 10.70 @ 100 | 4.77 @ 300 | 26.8 |
| L11TM600 | 6 Metre | 7 x 10.70 @ 100 | 4.77 @ 300 | 34 |
| L11TM2300 | 6 Metre | 24 x 10.70 @ 100 | 4.77 @ 300 | 107.1 |
| L12TM200 | 6 Metre | 3 X 11.90 @ 100 | 4.77 @ 300 | 16.3 |
| L12TM300 | 6 Metre | 4 X 11.90 @ 100 | 4.77 @ 300 | 21.8 |
| L12TM400 | 6 Metre | 5 X 11.90 @ 100 | 4.77 @ 300 | 27.3 |
| L12TM500 | 6 Metre | 6 X 11.90 @ 100 | 4.77 @ 300 | 32.8 |
| L12TM600 | 6 Metre | 7 X 11.90 @ 100 | 4.77 @ 300 | 38.1 |
| Model | Pitch/ certres | Wire dia. (mm) | Length (mm) | Width (mm) | Newt cover(sqm) | Heyou reinforcing item | Cross section sqmm/m | Mass per sqm kg/sqm | No.of Longitudinal wire | No. of Cross Wire | Overhangs of Longitudianal wire | Overhangs of Cross wire | Weight(kg) |
| 668 | 150 | 4.0 | 4650 | 1970 | 7.525 | 668L | 83.8 | 1.315 | 14 | 31 | 75/75 | 10/10 | 12.44 |
| 665 | 150 | 5.3 | 4650 | 1970 | 7.525 | 665L | 147.1 | 2.309 | 14 | 31 | 75/75 | 10/10 | 21.85 |
| 663 | 150 | 6.3 | 4650 | 1970 | 7.525 | 663L | 207.8 | 3.263 | 14 | 31 | 75/75 | 10/10 | 30.87 |
| 665 | 150 | 5.3 | 6150 | 2420 | 12.760 | 665E | 147.1 | 2.309 | 17 | 41 | 75/75 | 10/10 | 35.29 |
| 663 | 150 | 6.3 | 6150 | 2420 | 12.760 | 663E | 207.8 | 3.263 | 17 | 41 | 75/75 | 10/10 | 49.86 |
| 662 | 150 | 7.1 | 6150 | 2420 | 12.760 | 662E | 263.9 | 4.144 | 17 | 41 | 75/75 | 10/10 | 63.33 |
| 661 | 150 | 7.5 | 6150 | 2420 | 12.76 | 661E | 294.5 | 4.624 | 17 | 41 | 75/75 | 10/10 | 70.67 |
| 300 Centres of hard drawn mesh | |||||||||||||
| 668 | 300 | 5.6 | 4950 | 2220 | 10.08 | 84/10 | 82.1 | 1.289 | 4*5.6mm+4*4.0mm | 19 | 25/25 | 10/10 | 15.85 |
| 665 | 300 | 7.5 | 4950 | 2220 | 10.08 | 147/10 | 147.3 | 2.312 | 6*7.5mm+4*5.3mm | 19 | 25/25 | 10/10 | 28.36 |
| 665 | 200 | 6.1 | 5050 | 2020 | 8.312 | SE62 RES | 146.1 | 2.294 | 11 | 26 | 25/25 | 10/10 | 24.79 |
| 665 | 200 | 6.1 | 5850 | 2420 | 11.93 | SE62 | 146.1 | 2.294 | 13 | 30 | 25/25 | 10/10 | 34.10 |
| 665 | 300 | 7.5 | 6050 | 2420 | 11.58 | SE73 | 147.3 | 2.312 | 9 | 21 | 25/25 | 10/10 | 36.51 |
| 665 | 300 | 7.5 | 5000 | 2270 | 10.08 | SE73DE | 147.3 | 2.312 | 8*7.5mm+2*5.5mm | 19 | 7.5mm:25/25 5.5mm:25/25 | 10/10 | 30.69 |
| 664 | 200 | 7.0 | 5650 | 2220 | 10.432 | SE72 | 192.4 | 3.02 | 12 | 29 | 25/25 | 10/10 | 39.93 |
| 662 | 200 | 8.0 | 5650 | 2220 | 10.432 | SE82 | 251.3 | 3.946 | 12 | 29 | 25/25 | 10/10 | 52.16 |
| 661 | 200 | 9.0 | 6100 | 2420 | 12.76 | SE92 | 318.0 | 4.99 | 12 | 29 | 25/25 | 10/10 | 71.65 |
packing:
