Dual View Airport Baggage Scanner Self - Diagnosis With One - Key Shutdown Control

Dual Energy Multiple Size X-ray Baggage Scanner for bank

General Specifications:

• Tunnel Size : 560 (W) ×360 (H) mm
• Conveyor Speed: 0.22m/s
  Conveyor Max Load: 160 kg
  Wire Resolution: 40AWG
  Spatial Resolution: 1.0mm Horizontal and Vertical
  Steel Penetration: 40mm
  Single inspection dosage: < 1.0μGy
  Leakage radiation: <0.1μGy/h
  Computer: 19”High Resolution LCD Monitor
  Detector: L-shape dual energy semi-conductor PD array detector module(24bit)
  Grey level: 4096 (24 bit)
  Power supply: 220V AC (±10%) 50±3Hz
  Power consumption: 1.0KW (Max)
  Noise level: <58dB
  Storage temperature: -20℃～60℃
  Operation temperature: 0℃～45℃
  Relative humidity: Up to 95％(Without condensing)
  System weight: 350Kg

Equipment operation instruction
.1 Pre-check before power-on
Below check up must be done before switch on the system.
a. Lead rubber shade at entrance and exit of tunnel must be kept well in shape and droop strait. Impaired piece must be replaced with good ones.
b. Make sure all outer protective cover plate tightly covered and locked tight.
c. Conveyor belt must be kept well and without any part lacerated.
d. Make sure there is nothing left in the inspection tunnel.
e. All switches and buttons shall be in correct position. Especially the three red "EMERGENCY STOP " button is up release status.

2 Power-on
Switch on procedures are as below:
Step 1: Make sure it’s connected with 220V power supply (need grounding).
Step 2: Press power button on the console keyboard to start the system.
Step 3: Double click SF5030C software shortcut on the desktop to start the system
Open system operating software, login user name: SA, password: 12345678.
Step 4: Press “REFINE +” and “REFINE- ” when first time use
Press “REFINE +” when the first running, obtain Materials Database

• One-to-one exclusive service
• Online diagnosis service for after-sales service
• 24 months warranty for providing free spare parts
• Free training in factory for your engineer
• Accept arranging engineer go abroad for trainning should be paid
• Tender protection with authorization certificate