Active Member
|
[China]
Address: Room 811 Build 143, No. 1399 Husong Road, Shanghai, China
Contact name:Murphy
Shanghai Xunhui Environment Technology Co., Ltd. |
|
|
Air Operated Pneumatic Diaphragm Pump, MOC: PP Plastic/PVDF/Al-Alloy/Ductile Iron, Head: 70 M, DN15-125
Descriptions
As one of leading the air operated double diaphragm pump manufacturers in China, we offer a full range of pneumatic double diaphragm pump. The wet part materials are available with: Plastic PP/polypropylene, PVDF, Aluminum alloy, cast steel, ductile iron, stainless steel SS304, 316L, etc. also vairous diaphragm material, which can be suitable for many different liquid: waste water, sewage, syrup, cement grout, glue, chemical, solvent, strong acid, alkali base, oil, flammable, explosive liquid.
Specification
| Max working pressure: | 100psi ( 0.7Mpa , 7bar) |
| Max flow rate: | 150 gpm ( 570 lpm ) |
| Max reciprocating speed: | 145cpm |
| Max suction height: | 5m |
| Max permitted grain: | 6mm |
| Max air consumption: | 175scfm ( 4.9m³/min ) |
| Air inlet size: | 1/2 in.npt (f) |
| Air outlet size: | 1/2 in.npt(f) |
| Fluid inlet size: | 2in.npt(f) |
| Fluid outlet size: | 2in.npt(f) |
| Weight: | AL 29.0kg SST 47.0kg |
Product drawing:
Applications:
Waste water treatment, sludge, screening | Effluent treatment plant | Pharmaceutical feeds, transfer |
Automotive wash, lube, oil | Ceramics mix & cast, glaze | Chemical injection, process |
Pulp & paper batching, bleaching | Construction coating, dewatering | Food processing transfer, packaging |
Marine bilge, cleaning | Mining utility, dewatering | Oil & gas transfer, clean up |
Comptetitve advantage
The air-driven double diaphragm transfer pumps. No electrical components are required because the pumps are
air-driven. RD series pumps are run-dry safe and self-priming. The pump capacity can be controlled by changing
the pressure in the air supply. The air control is designed for oilfree operation. The RD series pumps are ideally
suited for the transport of liquid chemicals. It transports media at up 6,700 l/h and up to a discharge lift of 70 m.
As the pump capacity is highly dependent on the back pressure, the performance curve must always be observed.
At the sametime, the differential pressure between the hydraulic and pneumatic sides should not exceed 2 bar.
Higher values reduce the service life of the pump. When selecting pumps, check the material compatibility.
In addition, consider the density, viscosity and temperature of the transported medium.
