Active Member
|
[China]
Address: Room 811 Build 143, No. 1399 Husong Road, Shanghai, China
Contact name:Murphy
Shanghai Xunhui Environment Technology Co., Ltd. |
|
|
Stainless steel cylinder scraper | vertical brush filter vessel automatic self clean for viscosity liquid
Description:
The cylinder scraper automatic self cleaning filter is the ideal choice of filtering high viscosity, high corrosion resistance, and high pressure liquid.
This new generation of mechanical self-cleaning filter has reached the world advanced technology level. Different with backwashing, self-cleaning water filter, scraper filter is not only used for water filtration, but also widely used in the self-cleaning filtering of solvents, acid alkali, polymer, coating adhesive materials and so on, it has higher efficiency and precision of range 30-1500 microns. It can filter liquid viscosity up to 800000 centipoises, and also be applied in water treatment, petrochemical, metallurgy, electric power, chemical, paint, printing ink, paper, food and beverage, pharmaceutical, metal processing industries and etc.
Advantage:
The scraper filter which is fully automatic operation, high filtration precision, stable and reliable performance is an efficiency choice of replacing traditional manual filter or use dumping type material filter. In many areas it can replace the traditional cartridge filters, bag filters, basket filters, vibrating screen filters.
Construction material:
| Filter housing | CS / SS304 / 316L |
| Mesh media | SS304 / SS316L |
| Drive shaft seal | PTFE, teflon, up to 230 ℃ |
| O ring | NBR, acrylic rubber, most neutral, oil liquid, up to 120 ℃ |
| VITON fluorine rubber | alkaline, acid and other corrosion media, up 230 ℃, |
| Scraper / brush | SF type, super wear resistant, or SS type |
| Foot support | SS304 |
Operation Principle:
Install the filter screen (2) in a stainless steel cylindrical shell(1). When unfiltered liquid flows into the shell from the inlet (3), solid impurities were leached and deposited on the inner surface of the screen. Filtered liquid flows out from the outlet (4). When filter screen need cleaning (depending on the time, pressure differential, or manually choose), a clean dish tightened with spring scrapes the mesh inside surface back and forth constantly and removes the deposition of solid material. When the debris is separated from gap of the filter screen, wash dish will send the dirt into the bottom of the shell (6) and discharged through the flow channel(7).
Pneumatic cleaning plate drives through air pressure (60-80 psi @ 5 CFM). S-01 and S-02 filter’s main characteristic is that they can be driven by single cylinder or double cylinder. The smaller S- 01 model is only equipped with a cylinder.
Data sheet
| Model | FS01 | FS01-T | TS02 |
| Weight | 16 kg | 34 kg | 97.5 kg |
| Height | 1556 mm / 61.25 in | 1760 mm / 69.25 in | 2591 mm / 102 in |
| Total capacity | 3.5 L | 14.8 L | 41.6 L |
| Drain chamber capacity | 119 mL | 740 mL | 6000 mL |
| Filteration area | 772 cm2 | 1703 cm2 | 3935 cm2 |
| Flow rate range | 0.45 - 4.5 m3/hr | 4.5 - 13.6 m3/hr | 13.6 - 45.4 m3/hr |
| Max temperature | 177 ℃ | 177 ℃ | 177 ℃ |
| Max work pressure | 300 psi / 21 bar | 150 psi / 10.5 bar | 150 psi / 10.5 bar |
| Air drive requirement | 400/800=60 psi @ 5 cfm, 1600=800 psi @ 5 cfm (5 bar @ 8.5 m3/min) | ||
| Power supply | 110 / 220 VAC, 50-60HZ, 1PH | ||
