Home Companies Shenzhen Anges Machinery Co., Ltd

350 Ton Cooling Towers Chiller And Cooling Tower System 50Hz 380 Volt Three Phase

Shenzhen Anges Machinery Co., Ltd

Contact Us

[China] country

Trade Verify

Address: Tianshenghu Village Group, Luoma Village QingxiTown,Dongguan

Contact name:Sam

Inquir Now

Shenzhen Anges Machinery Co., Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

350 Ton Cooling Towers Chiller And Cooling Tower System 50Hz 380 Volt Three Phase

Country/Region china
City & Province dongguan
InquireNow

Product Details

350tons cooling  tower technical parameters

ModelSTG-350

 

 

 

 

 

Basic parameter

TypeCounter current circular cooling tower
Nominal flow273.24m3/h
Inlet/outlet temperature37℃/32℃
Dry-bulb temperature31.5℃
Wet-bulb temperature27℃
Cooling capacity1366200kcal/h
Noise (dB(A))65dB(A)
Power380V/3P/50Hz
Water qualityPH=6 to 8
N.W/G.W1800kg/3970kg
FanFan typeAxial Flow
Cooling air flow(m3/h)163944m3/h
Rotation speed(r/min)320r/min
Diameter2400 mm
Quantity4 pieces/set
Electronic boxWater proof type
Power7.5kw
Start-up modeDirect start

 

Size

Height × diameter(H×φ)4400×4630mm
Inlet pipe caliber200mm
Outlet pipe caliber200mm
Full outlet/drain off pipe caliber80mm/80mm
water supply pipe caliber25mm
MaterialSprinklerP.V.C-U
CasingFiberglass
Water basin
FanAl alloy
Electronic boxWater proof type
In -fillP.V.C.
ShelfHot-dip galvanized steel

Product Description
  • WORKING PRINCIPLE

  1. Cooling tower is a widely used thermal equipment that absorbs heat from a system and releases it into the atmosphere in order to lower the water temperature.
  2. The tower chassis, featuring anti-corrosion, strong ability of resistance of vile weather and beautiful appearance made of high strength glassfiber,
  3. Cooling towers rotation part and connection area is made of high quality raw materials, that greatly improves the service life and connection strength.
  • Advantages

  1. Low-speed fan to avoid excessive mist into the air.
  2. FRP body contains stable materials resisting ultraviolet radiation with a long service life.
  3. The structure contains rust-removing and high-strength galvanized steel which can bear corrosion and can be easily assembled.
  4. Different types(standard,low-noise,high-temperature and industrial type) to meet your needs
  • Main Features

  1. Small floating water rate: the spray device is evenly distributed in the tower, and the outlet area is about twice as large as that of the traditional power tower, so the wind speed is small. At the same time, the top of the tower is installed with excellent performance of the water collection device, which minimizes the amount of floating water, and eliminates a lot of water refill.
  2. ​ Good cooling effect: the hot water in the tower exchanges heat with the incoming air under the condition of mist. Due to the small wind resistance in the tower and the reasonable design of air duct and wind blade, the ratio of air to water is improved.
 

Hot Products

Hvac 60HP Industrial Chiller Integrated System 12 Months Warranty 60HP Integrated Screw Type Water ...
220V 380V 415V Industrial Chiller Integrated System Screw Type 40HP Integrated Screw Type Water ...
85HP Industrial Chiller Integrated System Semi Hermetic Screw Type 85HP Integrated Screw Type Water ...
160HP Integrated Water Cooled Screw Type Chiller R22 Refrigerant 160ton Screw Chiller 160ton Water ...
50HP Integrated Water Cooled Chiller System Shell And Tube Package Unit 50HP Integrated Screw Type ...
Integrated Screw Type 75HP Water Cooled Chiller Easy To Operate 75HP Integrated Screw Type Water ...