Shenzhen Anges Machinery Co., Ltd |
Verified Suppliers
|
|
120HP Air Cooled Screw Chiller Industrial Process Water Chillers
plastic injection mold temperature controller
Injection molding machine chiller used in plastic processing
machinery molding mold cooling, can greatly improve the surface
finish of plastic products, reduce the surface marks and internal
stress of plastic products, so that the product does not shrink, do
not deformation, easy to release plastic products, accelerate
product styling, thus greatly improving the production efficiency
of plastic forming machine.
Air Cooled Process Chiller Specification
Model Parameter | AGS-120ADH | |
Nominal cooling capacity | kcal/h | 302376 |
kw | 351.6 | |
Input power | kw | 112 |
Max. Running current | A | 255.3 |
Power supply | 3PH~380V/50HZ | |
Refrigerant | Type | R22 |
Refrigerating circuit | 1 | |
Type of control | Expansion valve | |
Compressor | Type | Semi-hermetic screw |
Quantity | 2 | |
Power | 47×2 | |
Start-up mode | Y-△ | |
Capacity control | 0-25-50-75-100 | |
Condenser | Type | Air cooled type finned copper tube |
Fan | Cooling air flow (m3/h) | 122000 |
Power(kw) | 18 | |
Evaporator | Type | Shell and tube |
Quantity | 1 | |
Chilled fluid flow (m3/h) | 60.5 | |
Inlet and outlet pipe diameter (inch) | 5 | |
Safety protection | compressor over temperature, unit overload, high and low pressure, flow switch, phase sequence, phase-missing, anti-freezing | |
Net weight | kg | 3850 |
Dimension | mm | 4400*2240*2720 |
Definition of air-cooled screw machine and water-cooled screw
machine
Air-cooled screw machines and water-cooled screw machines are both
equipment used for refrigeration and air conditioning. The
difference is that the air-cooled screw machine is cooled by air,
while the water-cooled screw machine is cooled by water to reduce
the temperature.
Comparison of the advantages and disadvantages of the two
1. Efficiency
The cooling efficiency of water-cooled screw machines is higher
than that of air-cooled screw machines. Because water has a higher
specific heat capacity than air, it has a stronger heat dissipation
ability. The water-cooled screw machine can quickly cool down in a
short time while saving energy. The air-cooled screw machine takes
a longer time to achieve the same effect and consumes more energy.
2. Maintenance
Water-cooled screw machines require water supply and consume more
water resources. At the same time, due to the principle of water
cooling, the water-cooled screw machine needs to be cleaned from
time to time to avoid damage to the pipeline and unit due to scale.
The air-cooled screw machine does not require a large amount of
water, and the maintenance of the unit is simpler.
3. Applicable scenarios
Water-cooled screw machines are suitable for scenarios that require
long-term operation and heavy loads, such as large shopping malls,
office buildings, factories, etc. The air-cooled screw machine is
suitable for small indoor air conditioning refrigeration, such as
homes, hotels, etc.
Benefit of industrial chiller applications
How to select the model of the chiller ?
In the production process, the injection molding machine needs to cool the mold to achieve rapid condensation of plastic, improve product quality, and improve production efficiency.
Here, the chiller is indispensable. Chiller used in injection molding machine, through extrusion, blow bottle, thermoplastic, hydraulic system four steps to achieve rapid condensation of plastic.
This shows the importance of the chiller to the injection molding machine. In the selection of chiller should pay attention to:
In mold cooling, the choice of ice water energy depends on its specific heat capacity with the molding material, the temperature at the time of sol, the weight, and the temperature at the time of product release.
In terms of temperature difference, the smaller the temperature difference, the more ice water flow is required to carry away the same heat, and the smaller the ice water flow is require