Active Member
|
[China]
Address: No. 3 Heyan road, Renhe advance manufacturing base, Yuhang district, Hangzhou, China
Contact name:Zhou
Hangzhou Aotuo Mechanical And Electrical Co., Ltd. |
|
|
| Capacity | 100 ~ 500t/H (Calculated According To Cement Bulk Density) |
| Applicable Ship Type | 600～15000 DWT |
| Horizontal Swivel Angle Of Horizontal Arm | ±135° |
| Pitch Angle Of Horizontal Arm | 30° For Lifting Up And 30° For Probing Down |
| Swing Angle Of Vertical Arm | 30° For Inner Swing And 40° For Outer Swing |
| Energy Consumption | ≤0.8kwh/T |
| Noise | ≤ 80dB |
| Dust Emission Concentration | ≤ 10 Mg/M³ |
Description
The ATXL-T tire mobile screw ship unloader is used in seaport wharfs that do not have installation tracks or fixed bases, and can unload large sea ships. The way of tire movement makes the equipment move more freely and the unloading operation is more flexible.
1. Wear-resistant: Powdery dry bulk materials are different from other types of materials. Due to the characteristics of high-speed screw conveying, the spiral blades and the wall of the spiral pipe are almost not worn, and only a few of the intermediate connecting shafts and their accessories of the screw conveyor are Components have wear resistance requirements. ATXL type screw ship unloader intermediate shaft and its accessories are made of high wear-resistant alloy materials with a number of patented technologies, and inlaid with carbide particles, with a service life of over 1 million tons.
2. Efficient: High-efficiency special reclaiming device and high-speed screw are
used to continuously lift and convey materials. The height of the
remaining material in the cabin is ≤250mm, the maximum unloading
capacity is 1500 tons/hour, and the average operating efficiency is
more than 70%.
3. Energy saving: Due to the continuity of material conveying of the screw ship
unloader, it is easy to realize the whole process of closed-loop
control and automatic adjustment from the reclaiming end to the
discharging end, so that the ship unloader is always in the best
working condition. Minimize the loss of reactive energy, so that
the unit energy consumption is between 0.5-0.7KWH/h, reaching the
level of energy saving.
4. Environmental protection: The screw ship unloader has a completely closed conveying system.
During the operation, there will be no material leakage, and the
impact of dust is strictly controlled to a minimum, which can meet
the port industry and national emission standards. In addition, a
reclaiming dust suppression device can be selected to minimize the
dust flying during the reclaiming process.
