Active Member
|
[China]
Address: No. 3 Heyan road, Renhe advance manufacturing base, Yuhang district, Hangzhou, China
Contact name:Zhou
Hangzhou Aotuo Mechanical And Electrical Co., Ltd. |
|
|
| Capacity | 300~1500t/h (calculated by clinker bulk weight) |
| Applicable Ship Type | 500~100000 DWT |
| Horizontal arm horizontal rotation angle | ±135° |
| Horizontal arm pitch angle | 30° upward lift, 30° downward probe |
| Vertical arm swing angle | inner swing 30°, external swing 40° |
| Energy Consumption | ≤0.8kwh/t |
| Noise | ≤ 80dB |
| Dust Emission Concentration | ≤ 10 Mg/M³ |
The ATSL environmentally friendly clinker screw ship unloader is a major technological innovation in the research and development of clinker ship unloading operation equipment. It solves the problems of dust flying and inefficient operation when unloading ships, and meets the national environmental protection standards. It is an upgraded replacement equipment for clinker operations in ports and terminals to replace grabs. At present, in the clinker transfer equipment market, this clinker ship unloader is more mature in technology, more exquisite in craftsmanship, and more popular with customers!
Detailed features:
1. Super wear-resistant:
ATSL type clinker ship unloader is the result of 19 years of
technology accumulation and ingenuity of AOTOO, with reasonable
structure, scientific and efficient, and it is an international
first. The blade surface of the screw machine at the reclaimer
adopts proprietary technology to integrate the "diamond grade" wear
resistance, which can exceed the wear life of 3000H. This type of
equipment can also unload sand and gravel with a particle size of
less than 100mm.
Subsequent hoisting and conveying adopts a special corrugated
sidewall belt conveyor, which is made of imported super-hard
wear-resistant materials and made by special technology, and its
transportation life can exceed 3 years.
2. Environmental protection:
The screw reclaimer has a built-in dust collection and dust
suppression system, which can quickly collect and absorb the dust
caused by the material flow and the collapse of the material layer
during the reclaiming process. The interior of the belt conveyor
for subsequent lifting and conveying is fully sealed, and a
bag-type dust collection port is provided at the tail of the belt
conveyor. A slight negative pressure is maintained in the sealed
channel, which solves environmental protection problems such as
dust flying, and completely solves the problem of dust in the open
operation of grab-type ship unloading. It is the most ideal
replacement product for traditional grab ship unloaders.
3. Energy saving:
The environmentally friendly clinker ship unloader is driven by a
permanent magnet motor, and at the same time controls the total
length of the reclaiming screw <5m, the volume is smaller, and
the energy consumption is greatly saved. The follow-up lifting and
conveying adopts the corrugated sidewall belt conveyor, which
greatly reduces the energy consumption of the whole machine, and
the energy consumption of the whole machine is about 0.6~0.8KWH/t.
Installation method: fixed type, track mobile type, tire mobile type, ship-mounted type
