Active Member
|
[China]
Address: Northwest Wire Mesh Industrial Zone, Anping County, Hebei Province, China
Contact name:Star Lee
Anping County Xinlu Wire Mesh Products Co., Ltd. |
|
|
Flow Rate 1.5Ton Wire Wrapped Strainer Nozzle, Water Filter Nozzle Threaded M32
Stainless steel filter screen, johnson screen nozzle, water and gas strainer nozzle, stainless steel filter nozzle, stainless steel filter candles, stainless steel lateral arms, wedge wire lateral pipes, wedge wire srainer, changeable filter element, header and hub laterals & hub radial laterals, water input device, water distributor, resign trans,etc.
Characteristic stainless steel water filter nozzle:
Stainless steel v / wedge - shaped wire water filter nozzle, usually with high quality stainless steel 304, 316L and other materials to ensure strong product structure and product bearing capacity.
Wedge Wire Water Filter Nozzle Parameters:
Metal wedge wire water filter nozzle is formed by welding wire(cross section is wedge)through a special welding technology welded on the support wire, use Special equipment for resistance welding, high welding strength, uniform gap, strong corrosion resistance, effective filter area, high penetration efficiency, simple structure, minimum aperture 25μm, arbitrarily chosen by the customer.
| No. | Model Type | D | L | H | Slot (MM) | Threaded | Slot 0.2-0.25 open areas mm2 |
| FYN1 | XL45-1-A | 45 | 80 | 25 | 0.2-0.5 | M25 | 280 |
| FYN2 | XL45-1-B | 45 | 90 | 35 | 0.2-0.5 | M25 | 390 |
| FYN3 | XL45-1-C | 45 | 98 | 34 | 0.2-0.5 | M20 | 380-493 |
| FYN4 | XL45-1-D | 45 | 100 | 45 | 0.2-0.5 | M25 | 500 |
| FYN5 | XL45-1-E | 45 | 100 | 34 | 0.2-0.5 | M24 | 551-690 |
| FYN6 | XL45-1-F | 45 | 110 | 45 | 0.2-0.5 | M25 | 550 |
| FYN7 | XL45-1-G | 45 | 55 | 35 | 0.2-0.5 | M25 | 380 |
| FYN8 | XL45-1-H | 45 | 65 | 45 | 0.2-0.5 | M25 | 550 |
| FYN9 | XL53-2-A | 53 | 90 | 35 | 0.2-0.5 | M25 | 450 |
| FYN10 | XL53-2-B | 53 | 100 | 34 | 0.2-0.5 | M24 | 453-597 |
| FYN11 | XL53-2-C | 53 | 100 | 45 | 0.2-0.5 | M25 | 570 |
| FYN12 | XL53-2-D | 53 | 100 | 50 | 0.2-0.5 | M27 | 680-710 |
| FYN13 | XL53-2-E | 53 | 105 | 34 | 0.2-0.5 | M32 | 800-920 |
| FYN14 | XL53-2-F | 53 | 110 | 45 | 0.2-0.5 | M25 | 580 |
| FYN15 | XL53-2-G | 53 | 110 | 50 | 0.2-0.5 | M32 | 700 |
| FYN16 | XL53-2-H | 53 | 120 | 55 | 0.2-0.5 | M32 | 700 |
| FYN17 | XL57-3-A | 57 | 100 | 35 | 0.2-0.5 | M32 | 530 |
| FYN18 | XL57-3-B | 57 | 110 | 45 | 0.2-0.5 | M32 | 600-680 |
| FYN19 | XL57-3-C | 57 | 115 | 35 | 0.2-0.5 | M30 | 560-670 |
| FYN20 | XL57-3-D | 57 | 120 | 55 | 0.2-0.5 | M32 | 800-905 |
| FYN21 | XL60-4-A | 60 | 120 | 55 | 0.2-0.5 | G1″ | 905-1100 |
| FYN22 | XL70-5-A | 70 | 105 | 40 | 0.2-0.5 | M32 | 650 |
| FYN23 | XL70-5-B | 70 | 110 | 45 | 0.2-0.5 | M32 | 800 |
| FYN24 | XL70-5-C | 70 | 115 | 50 | 0.2-0.5 | M32 | 810 |
| FYN25 | XL70-5-D | 70 | 120 | 55 | 0.2-0.5 | M32 | 1000 |
| FYN26 | XL82-6-A | 82 | 120 | 60 | 0.2-0.5 | G2″/M42 |
Note:
1. One Nozzle with a rubber gasket, same material gasket and two
thin nuts.
2. Available in customer design for perforated plate.
3. We can produce according to clients requirements.
4. Material:304,321,316,316L,904L ,HastalloyB and C, ets
Wedge Wire Water Filter Nozzle Advantages :
Optimum structural strength for heavy loads
Minimal plugging and blinding
High pressure/pulsating pressure capability
Corrosive application suitability
Thermal resistance
Long-life — almost endless cleanability
Sterile application/food industry suitability
Low-pressure drop
High flow rate
We can supply all kinds of filter nozzles, and the material and
size can be customed.
Wedge Wire Water Filter Nozzle Application:
Rapid and gravity sand filters
Activated carbon vessels
Demineralizers/water softeners filters
Ion exchange columns
Collectors and distributors
Water distributor
tank
power plant
Stainless Steel Wedge Wire Water Filter Nozzle Characteristics:
Strong and durable, with long service life.
The gap is even, no leakage of resin, no running material.
High opening rate can meet the requirement of large flow.
The structure is varied and meet different design requirements.
OEM service:
Please tell us the specification you need, Then we will help you to
process the high quality products.
1. Material: mainly stainless steel 304, 316L, 321, Hastelloy B, C
and other materials.
2. Outer diameter: 38mm, 45 mm, 53 mm, 57mm, 70mm, 82mm in usual.
3. Slot: 0.2mm-0.5mm in usual, error: + 0.03mm, can be according to customer needs.
4. Type: Female thread (G3/4", G1"), male threaded (M24 Or M32), no thread, long handle, single velocity, double velocity etc.
5. Length: 30mm, 45mm, 50mm, 100mm, 130mm, 150mm, and by customers' request.
1. We are the professional manufacturer.
2. We can give you the best quality products with competitive price.
3. Professional sales team can give you feedback within 24 hours.
4. We offer 12 months excellent after-sale service.
5. We offer customized service.
6. Our service is available twenty four seven, that is twenty four hours a day and seven days a week.
