SHANGHAI FAMOUS TRADE CO.,LTD |
Verified Suppliers
|
|
Application
Ti: sapphire (Titanium doped Sapphire, Al2O3:Ti3+) is used for making ultra-short pulse solid-state or wavelength tunable lasers. Ti: sapphire lasers are also very convenient e.g. for pumping test setups of new solid-state lasers (e.g. based on neodymium or ytterbium-doped gain media), since they can easily be tuned to the required pump wavelength and allow one to work with very high pump brightness due to their good beam quality and high output power of typically several watts.
1. Wide range of emission band from 660 to 1050 nm
2. The absorption band at 490 nm, ranging from 400 to 650 nm, is used for pump sources of many different lasers.
3. 3.2 μs fluorescence lifetime, effectively pumped by flash lamps in high-power laser systems.
4. Combining supreme thermal and optical properties with the broadest lasing range among other materials
5. Suitable for a variety of applications spanning from material processing to time-resolved and multi-photon spectroscopy.
Ø Best materials for ultrashort pulse generation |
Ø Tunable range from 600-1100nm |
Ø High gain |
Ø Could be pumped by short pulse flash lamps |
Ø Good physical and optical properties |
Main Specifications
Polishing Specification for Laser Grade | |
Orientation Tolerence | <0.5° |
Thickness/Diameter Tolerance | ±0.05 mm |
Parallel | 10" |
Perpendicular | 5' |
surface Quality | 10/5 |
Wavefront Distortion | λ/4@632nm |
Surface Flatness | λ/8@632nm |
Clear Aperture | >90% |
Chamfer | <0.2×45° |
Maximum dimensions | dia 120mm |
Material characteristics
Materials | Ti:Sapphire |
Nd Concentration tolerance (wt%) | 0.05-0.35wt% Ti2O3 |
Orientation | A-Axis within 5° E-vector parallel to C-Axis |
End Configuration | flat/flat or Brewster/Brewster ends |
Absorption Coefficence | 0.5~6.0cm-1 |
Figure of Merit | 100~300 |
Coatings | Standard coating is BBAR with R < 5.0% each face at 532 nm and R
< 0.5% each face, 650 nm to 850 nm. Other coatings available |
Q1: Can I have samples to test?
A: Yes, we are pleased to supply samples to test and check the quality, mixed sample order is available.
Q2: Do you have any MOQ limited? A: Our MOQ: 3pcs Q3: What’s the lead time?
A: Sample:2-7 days.Mass production: 15-20 days.
Q4:How do you ship the goods and how long does it take?
A: We usually ship goods by UPS, FedEx, or TNT. It usually takes 3-5 days to arrive.
Q5: Do you offer a guarantee for your products?
A: After testing them if not pass a test, you can return the goods at any time, we will re-offer you again and also bear the shipping fee.
Q6: Do you accept OEM?
A: We have our own brand-metalaser. OEM is also acceptable.