|
[China]
Trade Verify
Address: Baisha Sancun Industrial Zone, Humen Town, Dongguan City, Guangdong Province, China
Contact name:He
Dongguan Chenglue Electronic co.,Ltd |
|
Verified Suppliers
|
|
Metallized Polypropylene Film 1.5uf 155K 125VAC X2 Safety Capacitor
Good Self-Healing Properties
Safety X2 capacitors are a type of safety capacitors. Safety
capacitors are used in such occasions, that is, after the capacitor
fails, it will not cause electric shock and will not endanger
personal safety.
1. The main structure of the X2 safety capacitor.
It is made of metallized polypropylene film non-inductive structure
winding, using tinned copper clad steel wire, plastic shell and
flame retardant epoxy resin package.
Polypropylene film is used as the dielectric, and the zinc-aluminum
metal layer on the surface is vacuum-evaporated as the electrode.
It is manufactured by winding and other processes. The exterior is
packaged with (PBT) flame-retardant plastic shell and potted with
epoxy resin. The appearance design is compact and suitable for high
density occasion installation.
X2 Safety Capacitor.pdf
Characteristics of X2 Safety Capacitors
Non-inductive construction with metallized polypropylene film.
Excellent moisture resistance.
self-healing.
Excellent flame retardant properties.
Capable of withstanding overvoltage shocks.
The use of X2 safety capacitors.
Suppresses electromagnetic interference.
Jumper the lines.
It is suitable for the resistance-capacitance step-down of
ammeters, LED drivers, controllers, etc. in series in the circuit.
Marking
1. CIGU logo:
2. Capacitance:(104K ,0.1μF)
3. Capacitance Tolerance:(K)±10%
4. Rated Voltage:250,275,300,305,310VAC 5. Product Class:X2
6. Product type: MPX
7. Climatic Category: 40/110/56
8. Passive Flammability Class:B
9. China approvals mark:CQC
10. Germany approvals mark:VDE
11. ENEC approvals mark:ENEC
12. American approvals mark:CUL
13. Approval standard:IEC60384-14
NO. | Main Materials | Specification | Remark |
1 | Metallized polypropylene Film | MPPZAH or MPPA(5~12μm) | --- |
2 | Zn,Sn line | Zn or Zn and Sn alloy | --- |
3 | Terminal | Cu(Copper wire) (Φ0.55 or 0.75mm) | ±0.05mm |
4 | Sealed Material | Epoxy resin | UL94-V0 |
5 | Plastic Case | PBT | UL94-V0 |
Features
1.This is specifically designed for applications in serial with the
100Vac-240Vac main, i.e. capacitive divider, for example,energy
meter, LED driver etc.
2.Metallized polypropylene film
3.Good self-healing properties, withstanding surge voltage
stressing
4.Long stability of capacifance
5.Good properties in damp environment
6.Excellent active and passive flame resistant abilities
Construction and main materials of products
Specifications(IEC 60384-14)
| Test items | Performance requirements | Conditions of test |
| Capacitance | Within the tolerance specified | 1KHz, 1Vrms Max. at 25℃ |
| Dissipation Factor | 0.001 (0.1%) Max. | 1KHz, 1Vrms Max. at 25℃ |
| Voltage proof | Shall be no abnormality | Between terminals 4.3UR (Vdc) Test of 60sec. |
| Between terminal and enclosure UR×200％+1500Vac, 60sec. | ||
| Insulation resistance | CR ≤ 0.33μF IR ≥ 15,000MΩ CR >0.33μF IR ≥6,000s | 100±15Vdc, 60sec / 25℃ |
| Robustness of terminations | No wire breakage and no damage of capacitor | Tense Strength of Terminal Load Force : 1.0 Kg |
Bending Strength of Terminal Load Force : 0.5 Kg | ||
| Resistance to soldering heat | (1) Appearance : No visible damage | Solder temperature: 260±5℃ |
| Solderability | 95% of the surface tinning | Solder temperature: 260±5℃ |
| Rapid change of temperature | The capacitors shall be visually examined and there shall be no visible damage. | Lower category temperature: -40℃ |
| Vibration | The capacitors shall be visually examined and there shall be no visible damage | Frequency range: 10~55Hz |
| Test items | Performance requirements | Conditions of test |
| Climatic sequence | (1) Appearance : No visible damage | Dry Heat |
Cold | ||
| Damp Heat Steady State | (1) Appearance : No visible damage | +40°C and 93% RH, 56 days |
| Charge and discharge | (1) Appearance : No visible damage | Test voltage : √2 x URVAC 50 Hz |
| Endurance | (1) Appearance : No Visible Damage | 1.25 x UR VAC 50 Hz, once every hour |
Storage conditions
1 t should be noted that the solderability of the terminals may be
deteriorted when stored barely in an atmosphere for a long preriods
2 It shouldn't be located in particularly high temperature and high
humidity, it must submit to the following conditions(keeping in the
original package)
Temperature: 35 MAX Relative humidity:60% MAX
3 Storage period:Losse:12 monthes max (from the manufacturing date
marked on the label in package bag)
Enviroment requirement
1 Compliance with the requirement of RoHS.
2 Compliance with the requirement of REACH.
3 Without Halogen(as required).
4 Please see the attachment 2 for the test reprots of the Rohs and
Reach by a third party
Quality Control 
Product structure
Reference standards
GB-T2693-2001(IDT IEC 60384-1-2008)Fixed capacitors for use in
electronic equipment –Part 1: Generic specification
GB-T14472-1988 Fixed capacitors for use in electronic equipment
–Part 16:Sectional specification: Fixed metallized polypropylene
film D.C. capacitor
IEC-60384-14-2005 Fixed capacitors for use in electronic equipment
–Part 16:Sectional specification: Fixed metallized polypropylene
film D.C. capacitor
GB-T 2828.1-2003 Sampling procedures for inspection by
attributes—Part 1: Sampling schemes indexed by acceptance quality
limit (AQL)for lot-by-lot inspection (ISO 2859-1:1999, IDT)
Packing
Plastic bag is the minimum packing.the quantity are100,200,300, 500,1000PCS.
The label of the RoHS include the product name,specification, quantity, lot No,manufacture date etc.
One inner box have N PCS bags
Inner box size (L×W×H)=23×30×30cm Marking for RoHS AND SVHC
One outer box have two Inner boxes
Outer box size (L×W×H)=48×32.2×33cm Marking for RoHS AND SVHC
