Active Member
|
[China]
Address: No 1288 Guangrui Road , Liangxi district , WUXI City , Jiangsu province ,P.R,CHINA.
Contact name:Lucy
Wuxi Zhongxin Special Steel Co.，Ltd |
|
|
316/316L to ASTMA-666 stainless steel strip are molydbenum bearing stainless steels possessing a greatly increased resistance to chemical attack as compared to that of the basic chromium-nickel analysis. In addition, Type 316 also offers higher creep, stress-to-rupture, and tensile strengths at elevated temperatures than any other stainless steel. Gibbs stocks this material in gauges from 0.15MM - 4mm in the annealed and 1/4 hard conditions.
DIN 1.4401 DIN 316S42 DIN 316S33 DIN X5CrNiMo17-12-2 DIN X 5 CrNiMo 18 10 AFNOR Z7CND17-11-02 BS 316S16 UNI X5CrNiMo1712 SS 2347 UNE F.3543 SAE 316 JIS SUS316 JIS SUS316TKA JIS SUS316TF JIS SUS316FB JIS SUSF316 JIS SUS316TKC JIS SUS316TP JIS SUS316TB JIS SUS316TBS JIS SUS316TPY JIS SUS316TPD JIS SUS316HTP JIS SUS316HTB JIS SUS316HTF JIS SUS316F EN X5CrNiMo17-12-2 EN 1.4401 ISO A4 GOST 0Cr17Ni12Mo2 GB 08Ch27N13M2 ASTM 316 UNS S31600 IS X04Cr17Ni12Mo2 DIN 1.4436 DIN X5CrNiMo17-13-3 DIN X3CrNiMo17-13-3 AFNOR Z7CND18-12-03 BS 316S13 UNI X8CrNiMo1713 SS 2343 JIS SCS14 EN X3CrNiMo17-13-3 EN 1.4436 ISO A5 DIN 1.4984 AFNOR 9165-041 AFNOR 9165 25 AFNOR Z 10 CNW 17 EN 1.4984 ASTM F316 ASTM S31600 ASTM TP316 ASTM B8M ASTM Grade HE35 ASTM Grade 8M ASTM FP316 ASTM MT316 ASTM Grade 8MA ASTM Grade B8M ASTM Grade B8MA ASTM Grade B8M2 ASTM Grade B8M3
316 Stainless Steel Specifications:
ASTM A240 for annealed condition
ASTM A666 for tempered material
Hot Rolled Strip Available Size
Width: 16.0~609.6 mm
Thickness: 2.5~10.0 mm
Available Steel Grade:
Cold Rolled Strip Available Size
Width: 4.0~609.6 mm
Thickness: 0.1~3.0 mm
Surface Finish:
2B, 2D, BA, No.3, No.4, No.5, SB, HL, etc
| Surface finish | Characteristics and application |
| NO.2B | The surface brightness and flatness of no2B is better than no2D. then through a special surface treatment to improve its mechanical properties,No2B could nearly satisfy compreh ensive uses. |
| NO.1 | The surface is finished by heat treatment and pickling or processes corresponding thereto after hot rolling. |
| NO.4 | Polished with abrasive belt of grit #150-#180,have better brightness with discontinuous coarse stria,but thinner than No3, are used as bathtub buildings inner and external ornaments electrical appliances kitchen utensils and food processing equipment etc. |
| HL | Polished with abrasive belt of grit #150#320 on the NO.4 finish and has continuous streaks,mainly used as buildingsornaments elevators,door of building,frontal plate etc. |
| BA | Cold rolled, bright annealed and skin-passed, the product have excellent brightness and good reflexivity like mirror,kitchen apparatus,ornament etc. |
| 8K | The product have excellent brightness and prefer reflexivity can to be the mirror. |
ANNEALED CONDITION
Ultimate Tensile Strength: 95 KSI min (655 MPA min) Yield Strength (0.2% Offset): 38 KSI min (260 MPA min) Elongation: 40%min Hardness: B95 max
TEMPERED 1/16 HARD
Ultimate Tensile Strength: 95 KSI min (655 MPA min) Yield Strength (0.2% Offset): 45 KSI min (310 MPA min) Elongation: 40% min
Tempered 1/8 Hard Ultimate Tensile Strength: 100 KSI min (690 MPA min) Yield Strength (0.2% Offset): 55 KSI min (380 MPA min) Elongation: 45% min
TEMPERED 1/4 HARD
Ultimate Tensile Strength: 125 KSI min (860 MPA min) Yield Strength (0.2% Offset): 75 KSI min (515 MPA min) Elongation: 25% min
TEMPERED 1/2 HARD
Ultimate Tensile Strength: 150 KSI min (1035 MPA min) Yield Strength (0.2% Offset): 110 KSI min (760 MPA min) Elongation: 15% < 0.15" 18% > 0.15"
TEMPERED 3/4 HARD
Ultimate Tensile Strength: 175 KSI min (1205 MPA min) Yield Strength (0.2% Offset): 135 KSI min (930 MPA min) Elongation: 10% < 0.15" 12% > 0.15"
TEMPERED FULL HARD
Ultimate Tensile Strength: 185 KSI min (1275 MPA min) Yield Strength (0.2% Offset): 140 KSI min (965 MPA min) Elongation: 8% < 0.15" 9% > 0.15"
Available Steel Grade:
Stainless steel : Type 201, 202, 205, 301, 302, 302B, 303, 303Se, 304, 304L, 302HQ, 304N, 305, 308, 309, 309S, 310, 310S, 314, 316, 316L, 316F, 316N, 317, 317L, 317LMN, 321, 330, 347, 348, 384, 405, 409, 429, 430, 430F, 430FSe, 434, 436, 442, 446, 403, 410, 414, 416, 416Se, 420, 420F, 422, 431, 440A, 440B, 440C, 630 , 13-8 PH ,15-5 PH , 17-7 PH ,17-4 ph , 904L , A286 ,VG-10 , SAE 316 , SAE 316L , SAE 440 , SAE 420
Duplex stainless steel : 2205 , 2304 , 2507
Nickel alloy :
Titanium and titanium alloys
TYPE 316 STAINLESS STEEL STRIP
Type 316, ASTMA-666 stainless steel strip are molydbenum bearing stainless steels possessing a greatly increased resistance to chemical attack as compared to that of the basic chromium-nickel analysis. In addition, Type 316 also offers higher creep, stress-to-rupture, and tensile strengths at elevated temperatures than any other stainless steel. Gibbs stocks this material in gauges from .010” -
.025” in the annealed and ¼ hard conditions.
| Chemical Composition | % | Thickness Tolerances < 6” AMS2242 | Tolerance (inch) +/- | |||||
| Carbon | 0.08 max | over .050 - .062 incl | +/- .0030 | |||||
| Manganese | 2.00 max | over .035 - .050 incl | +/- .0025 | |||||
| Silicon | 1.00 max | over .029 - .035 incl | +/- .0020 | |||||
| Phosphorus | 0.040 max | over .020 - .029 incl | +/- .0020 | |||||
| Sulfur | 0.030 max | over .017 - .020 incl | +/- .0015 | |||||
| Chromium | 16.00 – 18.00 | over .013 - .017 incl | +/- .0015 | |||||
| Nickel | 10.00 – 14.00 | over .011 - .013 incl | +/- .0015 | |||||
| Molybdenum | 2.00 – 3.00 | over .010 - .011 incl | +/- .0015 | |||||
| Copper | 0.75 max | under .010 | +/- 10% | |||||
Mechanical Properties | ||||||||
| Condition | AMS Specification | Tensile Min PSI | Yield Min PSI | Elong % Min | Hardness (Reference Only) | |||
| Annealed | 5524 | 75,000 | 30,000 | 40 / 45* | RB 95 max | |||
| ¼ Hard | 5907 | 125,000 | 75,000 | 10 | RC 25 min | |||
| * .025 thickness and over | ||||||||
| Additional Information | ||
| Width Tolerance | +/- .003 | |
| Camber Tolerance | Up to and including 1.500” wide | .500” in 8 feet |
| Over 1.500” wide | .250” in 8 feet | |
| Edges available | #3 Slit edge | |
| #5 Deburred edge | ||
| #1 Round edge | ||
Q: Would you provide samples For free?
A: Yes. with on stock specification We provide samples For Free. Freight charge collect
Q: What information should i provide to source for the right products?
A: Material grade, width, thickness, coating and Purchase quantity, Expected lead time, etc
Q: What are the shipping ports?
A: Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you
can choose other ports according to your needs.
Q: About product prices?
A: Prices vary from period to period due to cyclical changes in the price of raw materials.
Q: How long does your delivery time take?
A: In general, our delivery time is within 5-45 days, and may be delayed if the demand is extremely
large or special circumstances occur.
Q: Can I visit your location?
A: Of course, we welcome customers from all over the world to visit our factory. However, some
of the plants are not open to the public.
Q: Does the product have quality inspection before loading?
A: Of course, all our products are strictly tested for quality before packaging, and unqualified products will be destroyed. We provide All Original Mill test certificate and support third party inspection.
Q: How to pack the products?
A: The inner layer has a waterproof paper outer layer with iron packaging and is fixed with a fumigation
wooden pallet. It can effectively protect products from corrosion during ocean transportation.
Q: What is your working time?
A: In general, our online service time is Beijing time: 8:00-22:00, after 22:00,
we will reply to your inquiry during the next working day.
