Bellows, industrial cutters, knives and a variety of vales and gas turbine componet
Active Member
|
[China]
Address: No 1288 Guangrui Road , Liangxi district , WUXI City , Jiangsu province ,P.R,CHINA.
Contact name:Lucy
Wuxi Zhongxin Special Steel Co.，Ltd |
|
|
AM 350 Alloy brings together the strength of heat
treatable martensitic grades with the corrosion resistance of
some of the chromium nickel austenitic grades.
AM 350 Alloy is a heat treatable austenitic or martensitic alloy,
depending on heat treatment. It brings together the
strength of heat treatable martensitic grades with the corrosion
resistance of some of the chromium nickel austenitic
grades. Generally used in applications under 1000 °F where a
combination of strength and good corrosion resistance are required.
Coil , Sheet, plate , Strip .wire ,- Profile, Round, Flat, Square
Specififcation:
Width | Thickness | Inner Diameter | Steel Grade | Surface Finish |
| 610~2030 mm | 0.15~3.0 mm | 610 or 508 +0/-5 mm | 201; 254 SMO; 301; 301 AL; 301Si; 302; 303; 303 SE; 304; 304 L; 304 LV; 304 V; 3049; 305;30512; 308; 309; 309 S; 309 SCB; 310; 310 S; 316; 316 L; 316 LN; 316 Ti; 317; 317 L; 321; 330; 347; 384; 405; 409; 410; 410 S; 414;416; 416 SE; 420; 420 A; 420 HC; 420 LC; 420 MO; 430; 430Li; 434; 436; 439; 440 A; 440 C; 441; 442; 444; 446; 18 SR1;Carpenter 20,CB32; Carpenter 4552; Custom 450; 18-9LW1; 19-90L4; Greek Ascology;; AL-6XN4; 904L; Duplex 2205; Duplex 2304; Duplex 2507,Nickel alloys , Titanium and Ti alloys | 2B, 2D, BA, No.3, No.4, No.5, SB, HL |
| 610~2030 mm | 2.5mm~10 mm | 610 or 508 +0/-5 mm | No.1 or As requied |
Striping processing, commonly known as “slitting “, refers to the
winding of a metal coil by unwinding, slitting,
leveling, winding, and processing into a desired width. Slitting
processing is a basic metal processing technology
that combines high-quality equipment with skilled craftsmanship. it
can be obtained with strict tolerance, perfect
surface control , safe packaging as well as fine transportation.
Bellows, industrial cutters, knives and a variety of vales and gas turbine componet
Grade 350 stainless steel alloy is a heat treatable
austenitic/martensitic alloy. The following
datasheet gives an overview of grade 350 stainless steel alloy.
The following table shows the chemical composition of grade 350 stainless steel alloy.
| Element | Content (%) |
|---|---|
| Iron, Fe | 72.69 - 76.29 |
| Chromium, Cr | 16-17 |
| Nickel, Ni | 4 - 5 |
| Molybdenum, Mo | 2.5-3.25 |
| Manganese, Mn | 0.5-1.25 |
| Silicon, Si | 0.5 |
| Nitrogen, N | 0.07-0.13 |
| Carbon, C | 0.07-0.11 |
| Phosphorus, P | 0.04 |
| Sulfur, S | 0.03 |
The physical properties of grade 350 stainless steel alloy are highlighted in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 7.7-8.03 cm3 | 0.278-0.290 lb/in3 |
The following table outlines the mechanical properties of grade 350 stainless steel alloy.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength | 1105 MPa | 160266 psi |
| Yield strength | 415 MPa | 60190 psi |
| Elastic modulus | 190-210 GPa | 27557-30458 ksi |
| Poisson's ratio | 0.27-0.30 | 0.27-0.30 |
| Elongation | 30% | 30% |
| Hardness | 95 | 95 |
The thermal properties of grade 350 stainless steel alloy are displayed in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Thermal expansion co-efficient (@ 20-100°C/70-212°F) | 11.3 µm/m°C | 6.55 µin/in°F |
| Thermal conductivity (@ 38°C/100°F) | 14.5 W/mK | 100.7 BTU in/hr.ft².°F |
Packaging (details)
1. Pallets with several coils
1.1 Coils packed eye to sky on one-way pallet with spacers without
pallet cover.
1.2 Coils packed eye to sky on one-way pallet with spacers and
covered with shrink-wrap.
1.3 Coils packed eye to sky on one-way pallet with spacers and
covered with paper hood.
1.4 Coils packed eye to sky on one-way pallet with spacers and
covered with wooden box.
1.5 Coils packed eye to sky on pallet with spacers without
cover.
1.6 Coils packed eye to sky on pallet with spacers and shrink
wrap.
1.7 Coils packed eye to sky on pallet with spacers and paper
hood.
2. Pallet with single coil
2.1 Coil packed eye to sky on one-way-pallet without cover.
2.2 Coil packed eye to sky on one-way-pallet with shrink wrap.
2.3 Coil packed eye to sky on one-way-pallet with paper hood.
2.4 Coil packed eye to sky on one-way-pallet with wooden box.
2.5 Coil packed eye to sky on pallet without cover.
2.6 Coil packed eye to sky on pallet with shrink wrap.
2.7 Coil packed eye to sky on pallet with paper hood.
3. Pallets with multistrip
3.1 Multistrip on one-way pallet.
4. Coils standing, unpacked
5. Pallets with spools, standing with horizontal axe
5.1 Wooden spool on one-way pallet standing with horizontal (eye to
the wall) axe.
5.2 Cardboard spool (cardboard core and cardboard sheet) on one-way
pallet standing (eye to the wall).
6. Cut lengths
6.1 Bundled.
6.2 On wooden boards.
6.3 In wooden boxes.
7. Special customer requests for packaging
7.1 Weight per packing unit.
7.2 Design and size of pallet.
7.3 Number and kind of coil tying.
7.4 Number and kind of interleaving spacer strips.
7.5 Corrosion protection.
7.6 Kind of wood and wood protection used.
7.7 Marking of material and packing.
Q: Would you provide samples For free?
A: Yes . with on stock specification We provide samples For Free . Freight charge collect
