Hot-dip Galvanized Steel Coil |
| CNS 1244 2013 | JIS G 3302 2019 | ASTM A653M 2017 | AS1397 2011 | EN 10346 2015 |
Specifications | Hot-rolled Base: | Cold-rolled Base: | Hot-rolled Base: | Cold-rolled Base: | DS | G1~G3 | DX51-52-53D |
SGHC | SGCC | SGHC | SGCC | DDS | G250 | S220GD |
SGHD | SGCD | SGHD | SGCD | CS TYPE A, B, C | 300 | (250 |
SGH | 1~3 | SGH | 1~3 | FS TYPE A, B | 350 | 280 |
340 | SGC | 340 | SGC | SS GRADE | 400 | 320 |
400 | 340 | 400 | 340 | 33(230) | 450 | 350 |
440 | 400 | 440 | 400 | 37(255) | 550 | 550) |
490 | 440 | 490 | 440 | 40(275) | | |
540 | 490 | 540 | 490 | 50(340)CLASS 1~3 | | |
| 570 | | 570 | 80(550)CLASS 1~3 | | |
Thickness of Base Steel (mm) | 1.2~4.60 | SGCD1~3: 0.27~2.0mm | 1.2~4.60 | SGCC,SGC340: 0.18~3.0mm; | DS: 0.27~2.0mm; | G1: 0.19~4.50mm; | DX51D: 0.19~4.50mm; |
SGCC/SGC: 0.19~2.0mm | SGCD1~3: 0.25~2.0mm; | DDS: 0.25~2.0mm; | G2&G3: 0.27~2.0mm; | S220~550GD: 0.19~4.6mm; |
| SGC400, 440: 0.229~3.0mm; | CS/FS: 0.19~4.50mm; | G250~550GD: 0.19~4.6mm; | S250GD: 0.18~2.02mm; |
| SGC490: 1.8~3.0mm; | SS GRADE 33~80: 0.19~4.50mm; | G300: 0.229~2.3mm; | DX52D: 0.295~2.0mm; |
| SGC570: 0.229~2.2mm | CS TYPE A, B, C, Grade 33, 37: 0.18~3.0mm; | G350: 0.229~3.0mm; | DX53D, 54D: 0.25~2.0mm; |
| | FS TYPE A, B: 0.295~2.0mm; | G450: 0.6~3.0mm; | S280GD, S350GD: 0.229~3.0mm; |
| | Grade 40, 50: 0.229~3.0mm; | G500: 1.1~2.5mm; | S320GD: 0.229~2.3mm; |
| | Grade 55(380): 0.35~3.0mm; | G550: 0.229~2.2mm | S550GD: 0.229~2.2mm |
| | Grade 60(410): 0.47~1.6mm; | | |
| | Grade 65(450): 0.6~3.0mm; | | |
| | Grade 80: 0.229~2.2mm | | |
Coating Mass: | Z08~Z60 | Z08~Z60 | Z90~Z600 | Z100~Z600 | Z100~Z350 |
Regular Spangle |
(thickness > 0.60mm) |
Minimized (Zero) |
Spangle |
Surface Finish | Regular Spangle, Minimized (Zero) Spangle, Extra-Smooth |
Surface Treatment | Chromating, Oiled, Resin Coated (Anti-Fingerprint), or Green
Treatment (Environmentally Friendly Anti-Fingerprint) |
Remarks | 1. Tolerance for thickness, width, flatness and so on conforms to
individual product specification. |
2. All products with thickness 2.0mm and under can be skin passed. |
3. The specification for thicknesses under 1.6mm for hot-rolled
base metal according to JIS G3302 will be the same as for
thicknesses 1.6mm. |
4. The coil inside diameters can be either 508mm or 610mm. The
maximum coil outside diameter is 2000mm. |
5. Please make inquiries to US for products with special
specifications. |
6. Coating mass beyond the specifications above can be provided by
Yieh Corp. upon mutual agreement between customers and us. |
7. Coating mass Z08, Z09 and Z90 only apply for cold-rolled base
metals. |