Active Member
|
[China]
Address: No 1288 Guangrui Road , Liangxi district , WUXI City , Jiangsu province ,P.R,CHINA.
Contact name:Lucy
Wuxi Zhongxin Special Steel Co.，Ltd |
|
|
2014A T651 Sheet and Plate
A high strength 4 to 5% Copper alloy produced in extruded bar and
profile form, in the fully heat-treated condition (solution
heat-treated & artificially aged).Normally stocked in the T651
condition (stress relieved by controlled stretching) Except for
sizes under 10mm diameter and over 203.2mm diameter. (T6 only).
Over 203.mm diameter is manufactured to chemical composition Only.
Machinability of aluminium alloy 2014A is very good.
Typical applications of aluminium alloy 2014A are high strength
componenets especially for use in the aerospace and defence
industries.
Grade | Thickness | Width x Length |
|---|---|---|
AA1100 | 0.5mm to 12mm | 1220mm x 2440mm (4 Ft. x 8 Ft.) |
AA2024 | 6.0mm to 76mm | 1524mm x 3660mm (5 Ft. x 12 Ft.) |
AA5052 | 0.8mm to 25mm | 1220mm x 2440mm (4 Ft. x 8 Ft.) |
AA5083 | 2.0mm to 180mm | 1220mm x 2440mm (4 Ft. x 8 Ft.) |
AA6061 | 1.5mm to 320mm | 1220mm x 2440mm (4 Ft. x 8 Ft.) |
AA7075 | 6.0mm to 230mm | 1220mm x 2440mm (4 Ft. x 8 Ft.) |
| 6.0mm to 127mm | 1220mm x 2440mm (4 Ft. x 8 Ft.) |
Aluminium plate / Aluminium sheet specication ,Surface Finish, Size Range
Aluminium Alloy 2014 Sheet and Plate Specification
Standards : ASTM B209 / ASME SB209
Temper : O, F, H12, H14, H16, H18, H19, H22, H24, H26, H32, H34, H36, H38, H111, H112, H321, T3, T4, T5, T6, T7, T351, T451, T651, T851
Thickness : 0.2~300mm
Width : 500~2500mm
Length : 500~10000mm
Surface : Bright, polished, hair line, brush, sand blast, checkered, embossed, etching, etc.
Finish :Mill, Customer specific finish
Aluminum Sheet/ Plate Coating : PVC Coated, Color Coated, Polyester, Fluorocarbon, polyurethane and epoxy coating
Type : Hot-Rolled (HR) / Cold-Rolled (CR) Sheet / Plates/ Strips/ Coils/ Chequered Plates
Standard Specification for Aluminium Alloy 2014 Sheet, Plate
ASTM B209 - Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
ASTM B632 / B632M -Standard Specification for Aluminum-Alloy Rolled Tread Plate
ASTM B947 - Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate
ASTM B548 - Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels
AMS 4028 - Aluminum Alloy, Sheet and Plate, 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg, Anneal
AMS 4029 - Aluminum Alloy Sheet and Plate (2014 -T6 Sheet, 2014-T651 Plate) Solution and Precipitation Heat Treated
ASTMB209
ASMESB209
ANSIH35.1/H35.1(M)
AMS4028 / 4029
Aluminium 2014 Sheet & Plate Chemical Properties
Alloy | Si | Fe | Cu | Zn | Mn | Mg | Ti | Other | Cr | Ni | Others | Ti+Zr | Al |
2014 (min) (max) | 0.50 - 0.90 | 0.0 - 0.50 | 3.90 - 5.00 | 0.0 - 0.25 | 0.40 - 1.20 | 0.20 - 0.80 | 0.0 - 0.15 | 0.0 - 0.15 | 0.0 - 0.10 | 0.0 - 0.10 | 0.0 - 0.05 | 0.0 - 0.20 | Balance |
2014 Aluminium Alloy Sheet and Plate Mechanical Properties
Alloy | Temper | UTS (Mpa) | Yield Strength (Mpa) | Elongation (%) | ||
- | - | Minimum | Maximum | Minimum | Maximum | A 50mm (Minimum) |
EN AW-2014 | O | – | 250 | – | 135 | 10 |
T4 | 370 | – | 230 | – | 11 | |
Dimension | Range |
Thickness | 0.5 ~ 6.0mm for sheet |
Width | 600 ~ 2,500mm |
Length | 2,000 ~ 10,000mm |
- Standard Width and Length:
1000x2000mm, 1250x2500mm, 1500x3000mm, 1219x2438mm, 1524x3048mm
- Surface Finish:
Mill finish (unless otherwise specified), Color Coated, or Stucco Embossed
- Surface Protection:
Paper interleaved, PE/PVC filming (if specified)
- Minimum Order Quantity: 3~5MT per size, total 20MT for one order
Alloy | Temper |
1xxx: 1050, 1050A, 1060, 1100 | O, H12, H14, H16, H18, H22, H24, H26, H28, H111 |
3xxx: 3003, 3004, 3005, 3105 | |
5xxx: 5005, 5052, 5754, 5083, 5086, 5182, 5049, 5251, 5454 | O, H22, H24, H26, H28, H32, H34, H36, H38, H111 |
6xxx: 6061, 6082 | T4, T6, T451, T651 |
2xxx: 2024 | T3, T351, T4 |
7xxx: 7075 | T6, T651 |
Alloy Series | Chinese Standard | American Standard | European Standard |
1xxx Series | 1050 | - | - |
1050A | - | EN AW-1050A | |
1060 | 1060 | - | |
1100 | 1100 | - | |
2xxx Series | 2024 | 2024 | EN AW-2024 |
3xxx Series | 3003 | 3003 | EN AW-3003 |
3004 | 3004 | EN AW-3004 | |
3005 | 3005 | EN AW-3005 | |
3105 | 3105 | EN AW-3105 | |
5xxx Series | 5005 | 5005 | EN AW-5005 |
5052 | 5052 | EN AW-5052 | |
5754 | 5754 | EN AW-5754 | |
5083 | 5083 | EN AW-5083 | |
5086 | 5086 | EN AW-5086 | |
5182 | - | EN AW-5182 | |
5049 | - | EN AW-5049 | |
5251 | - | EN AW-5251 | |
6xxx Series | 6061 | 6061 | EN AW-6061 |
6082 | - | EN AW-6082 | |
7xxx Series | 7075 | 7075 | EN AW-7075 |
Temper Designation (For Reference)
Temper | Definition |
O | Annealed |
H111 | Annealed and slightly strain hardened (less than H11) |
H12 | Strain Hardened, 1/4 Hard |
H22 | Strain Hardened and Partially Annealed, 1/4 Hard |
H32 | Strain Hardened and Stabilized, 1/4 Hard |
T3 | Solution heat-treated, cold worked and naturally aged |
T351 | Solution heat-treated, cold worked, stress-relieved by stretching and naturally aged |
T4 | Solution heat-treated and naturally aged |
T451 | Solution heat-treated, stress-relieved by stretching and naturally aged |
T6 | Solution heat-treated and then artificially aged |
T651 | Solution heat-treated, stress-relieved by stretching and artificially aged |
ASTM-B928 2014 T651 Aluminum sheet / Plate Application
Structural or Architectural applications
Frames
Rails
Automotive components
Building and Architecture
Domestic and Office Furniture
Transmission Towers
Furniture Applications
Scaffolding
Features
Corrosion resistant
Durable functioning
Malleable
Heat resistance
High strength
Excellent conductivity
Impeccable finish
Enhanced service life
Precisely designed
Grade | Thickness | Width x Length |
|---|---|---|
AA1100 | 0.5mm to 12mm | 1220mm x 2440mm (4 Ft. x 8 Ft.) |
AA2024 | 6.0mm to 76mm | 1524mm x 3660mm (5 Ft. x 12 Ft.) |
AA5052 | 0.8mm to 25mm | 1220mm x 2440mm (4 Ft. x 8 Ft.) |
AA5083 | 2.0mm to 180mm | 1220mm x 2440mm (4 Ft. x 8 Ft.) |
AA6061 | 1.5mm to 320mm | 1220mm x 2440mm (4 Ft. x 8 Ft.) |
AA7075 | 6.0mm to 230mm | 1220mm x 2440mm (4 Ft. x 8 Ft.) |
| 6.0mm to 127mm | 1220mm x 2440mm (4 Ft. x 8 Ft.) |
FAQ
Q: Would you provide samples For free?
A: Yes . with on stock specification We provide samples For Free . Freight charge collect
Q: What information should i provide to source for the right products ?
A: Material grade, width, thickness, coating and Purchase quantity , Expected lead time ,etc
Q: What are the shipping ports?
A: Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you can choose other ports according to your needs.
Q: About product prices?
A: Prices vary from period to period due to cyclical changes in the price of raw materials.
Q: How long does your delivery time take?
A: In general, our delivery time is within 5-45 days, and may be delayed if the demand is extremely large or special circumstances occur.
Q: Can I visit your location?
A: Of course, we welcome customers from all over the world to visit our factory. However, some of the plants are not open to the public.
Q: Does the product have quality inspection before loading?
A: Of course, all our products are strictly tested for quality before packaging, and unqualified products will be destroyed.
Q:How to pack the products?
A:The inner layer has a waterproof paper outer layer with iron packaging and is fixed with a fumigation wooden pallet. It can effectively protect products from corrosion during ocean transportation.
Q:What is your working time?
A:In general, our online service time is Beijing time: 8:00-22:00, after 22:00, we will reply to your inquiry during the next working day.
Aluminium plate / Aluminium sheet products display and package
