|
[China]
Trade Verify
Address: 广东省深圳市龙华区大浪街道华明路浪口华明工业区C栋
Contact name:Vera
Shenzhen Ryder Electronics Co., Ltd. |
|
Verified Suppliers
|
|
|
Product Description:
| No | Item | Rated performance | Remark |
| 1 | Rated capacity | Nominal 24Ah Min 24Ah-5% | Standard discharge after standard charge |
| 2 | Nominal voltage | 12.8V | Mean operation voltage during standard discharge after standard charge |
| 3 | Voltage at end of discharge | 8.0V | Discharge cut-off voltage |
| 4 | Charging voltage | 13.8V | |
| 5 | Impedance | <80mΩ | |
| 6 | Standard charge | Constant current 0.2C5A Constant voltage 13.8V Cut-off current≤0.02C5A | |
| 7 | Standard discharge | Constant current 0.2C5A End voltage 8.0V | |
| 8 | Fast charge | Constant current 0.5C5A Constant voltage 13.8V Cut-off current≤0.02C5A | |
| 9 | Fast discharge | Constant current 0.5C5A End voltage 8.0V | |
| 10 | Maximum continuous discharge current | 30A | (60A :<10S) |
| 11 | Operation temperature range | Charge: 0~45℃ | 60±25%R.H |
| Discharge: -20~60℃ | |||
| 12 | Cycle life | >800cycles | Charging/discharging in the below condition: Charge: standard charge Discharge: 0.5C5A to 8.0V Rest time between charge/discharge:30min Until the discharge capacity <80% of NC |
| 13 | Storage temperature | ≤1 month: -20 ~ 45℃ | 60±25%R.H Best 10~25℃ for long-time storage |
| ≤3 months: -20 ~ 35℃ | |||
| ≤1 year: 0 ~ 25℃ | |||
| 14 | Weight | Approx: 2.9kg | |
| 15 | Dimension(mm) | Thickness*Width*Height(Max) | 110*165*160 |
Battery electrical performances:
| No | Items | Test procedure | Requirements |
| 1 | Nominal voltage | The average value of the working voltage during the whole discharge process. | 12.8V |
| 2 | Discharge performance | The discharge capacity of the battery, measured with 0.2C5A down to 8.0V within 1 hour after a standard charge at 25±5℃ | Discharge ≥Minimum capacity |
| 3 | Capacity retention | After 28 days storage at 25±5℃, after having been standard charged and discharged at 0.2C5A to 8.0V (the residual capacity is above 90% of nominal capacity) | Discharge time≥4.5h |
| 4 | Cycle life | Charging/discharging in the below condition: Charge: standard charge at 25±5℃ Discharge: 0.5C5A to 8.0V Rest time between charge/discharge:30min Until the discharge capacity <80% of NC | >800cycles |
| 5 | Storage | (Within 3 months after manufactured) The battery is charged with 0.2C5A to 40-50% capacity and stored at ambient temperature 25±5℃, 65±20%RH for 12 months. After the 12 months storage period the cell is fully charged and discharged to 8.0V with 0.2C5A | Discharge time≥4h |
PCM electrical characteristics:
| Item | Content | Criterion | |
| Charge Protection | Over charge detection voltage(Cell) | 3.900±0.030V | |
| Over charge release voltage(Cell) | 3.800±0.050V | ||
Discharge protection | Over discharge detection voltage(Cell) | 2.000±0.050V | |
| Over discharge release voltage(Cell) | 2.300±0.100V | ||
| Continuous discharge current | ≤30A | ||
| Over discharge detection current | 90±10A | ||
| Balanced | Balanced open voltage(Cell) | 3.600±0.035V | |
| Balanced release voltage(Cell) | 3.600±0.050V | ||
| Balanced current(Cell) | 65±5mA | ||
| Short Protection | Detection condition | Exterior short circuit | |
| Protection | Have | ||
| Release condition | Cut short circuit | ||
| Interior resistance | Main loop electrify resistance | ≤20mΩ | |
| Current Consumption | Current consume in normal operation | ≤60μA | |
| PCB Dimension(L*W*T) | PCB-RYD-04S-006 V2.0 85*45*1.2mm | ||
CAPACITY
150 ampere hours. Lithium batteries provide consistent power for all 150 amp hours. MaxLi LiFePO4 batteries have a flat voltage curve, which means they have a steady power output as the battery discharges.
LIFECYCLES (BATTERY LIFESPAN)
Up to 100% capacity for 3,000 cycles in recommended conditions. The
typical SLA has 400 cycles. Lithium batteries last so long that the
price per use is a fraction of traditional batteries.
Smart Built-in BMS
passive balancing (active balance optional), low voltage cutoff, high voltage cutoff, short circuit protection and temperature protection for increased performance and longer life. Besides, Bluetooth function for option that enables to monitor battery status, such as, voltage, capacity and so on.
Factory photo:
Contact with our sales team for your OEM and ODM order.
OEM/ODM Service:
If you want to display your own brand logo in products, bags, labels or anywhere. Or you need to develop battery packs according to your product orientation. Our OEM and ODM services are ready to do it.
Packing:
According to Stardard Export Packing.
Carton box, wooden box, wooden pallet
FAQ
Q1: Are you a trading company or manufacturer?
A: We are professional manufacturer specialized in Lithium ion
batteries and LiFePO4 batteries for Electric bicycle, Electric
scooter, Electric motorcycle, Electric Tricycle, Sharing bike,
vacuum cleaners, Energy storage system for Industrial and
household, as well as customized battery packs application.
Q2: What’s your battery product range?
A: The battery range we can make is voltage from 3.2V to 100V, Capacity from 1Ah to 300Ah.
Q3: Can you do OEM and ODM?
A: Yes, OEM and ODM are both acceptable. You can provide the detailed specification requirements to us, our engineers can design the most suitable battery solution for you.
Q4: Is it possible to buy a sample to test?
A: Yes. You can buy a sample to test.
Q5. What is your terms of payment?
A: T/T 30% as deposit, and 70% balance payment before shipment.
We'll show you the photos of the products and packages before
shipment.
Q6:What is your terms of delivery ?
A:EXW, FOB, CIF, DDU
Q7: How about your battery delivery time?
A: Within 20-40 days after receiving your advance payment.
The specific delivery time depends on the items and the quantity of your order.
