Home Companies Shenzhen Ryder Electronics Co., Ltd.

320Wh Lifepo4 Power Station 220V 200W Pure Sine Wave AC Outlets For Camping

Contact Us

[China]

Trade Verify

Address: 广东省深圳市龙华区大浪街道华明路浪口华明工业区C栋

Contact name:Vera

Shenzhen Ryder Electronics Co., Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

320Wh Lifepo4 Power Station 220V 200W Pure Sine Wave AC Outlets For Camping

Country/Region	china
City & Province	shenzhen guangdong
Categories	Digital Cameras

Product Details

Ryder Portable power station, 320Wh LiFePO4 Battery backup,220V 200W Pure sine wave AC Outlets, PD 45W USB-C input and output, Solar Generator power supply,LED Light for outdoor camping

Description :

This product is a portable power station, the rated total output power approach 400W, including 200W AC, 45W PD , 24W Dual USB,120W DC and 3.6W LED light; There are totally 4 types of output connects, that including AC Socket, Type-C, USB-A, DC 5521 and Car cigarette output. The DC Input connector of the devices can support charge by solar panel, Car cigarette output, Adapter; the devices also can charge via the Type-C connector, this can be charge by the PD Adapter.

DC INPUT + PD INPUT/OUTPUT )

DC INPUT
Item	Min	Type	Max	Remark
Rated Input voltage	10V	15V	25V	Whichever Non load or loading
Rated Input current	-	3A	3.5A
Rated Input power		45W		Automatic adjustment according input power
Ripple voltage of charging	-	-	200mV	Test from the Input connector, oscilloscope Bandwidth setup as 20MHZ, parallel with 10uF and 0.1uF capacitor
Input over-current protection	-	-	-
Input Lower-voltage protection	-	-	5V
Input over-voltage protection	25V	-	27V	The devices will stop charging If the Input voltage exceed the protection voltage
Input port short-circuit protection	-	-	-	Stop charging, components no damage
Input polarity reverse protection	-	-	-	Support(not charging if input polarity reverse)
Input adapter compatibility	10-15 VDC
Solar panel charging	18-24V with mppt function
Pass through function	The device can support discharging while the product is charging; the Type-C Output power will drop down to 36W if the product charging via DC Input port.
LCD display of charging	Display the charging power and battery capacity
Battery charging suggestion	Suggestion charging the device every 2 or 3 month; Self consumption: ＜2mA


Item	Min	Type	Max	Remark
PD45W Charge and Discharge	4.75V	5.0V	5.5V	PCBA board end voltage; 5V/9V/12V/15V Rated input/output current:3A 20V Rated input/output current:2.25A
	8.55V	9V	9.45V
	11.4V	12V	12.6V
	14.25V	15V	15.75V
	19V	20V	21V
Apple 5V/2.4A Charge and Discharge	4.75V	5.0V	5.25V	Protocol: BC1.2 DCP; Apple 2.4A
Apple 5V/2.4A Charge and Discharge			2.4A	Protocol: BC1.2 DCP; Apple 2.4A
Output short circuit protection				Turn off discharging

DC (5521)Output features

	Min	Type	Max	Remark
Output voltage range	10.8V	12.0V	14.6V
Allowable output current	-	10A	-
Allowable output power	-	120W	146W
output current	-	10A	12A	CV 12V test
Output ripple	-	-	< 150mV	Rated load,oscilloscope Bandwidth setup as 20MHZ, parallel with 10uF and 0.1uF capacitor, the ripple < 800mV while AC Output loading
Discharging efficiency	>92%	-	-	Test requirements: test 4 model average efficiency of 25% 50% 75% 100% of full load; test at PCBA board end.
Limited current protection	10A	-	13A	The output will turn off if the output current is exceed specified value; the LCD blink display AC ! while Key’s LED blinking and buzzer is ringing 3 times. The product will recover work normally after cut off the loading and press key button.
Output over-voltage protection	15V	-	16.8V	The output will turn off when	the product
				doesn't work properly and the output
				voltage is exceed specified value.
Short circuit protection	-	support	-	The output will turn off and the LCD blink display AC ! while Key’s LED blinking and buzzer is ringing 3 times. The product will recover work normally after cut off the loading and press key button.

USB1&2 Output features

Item	Min	Type	Max	Remark
Output voltage range	4.75V	5V	5.25V
Allowable output current	-	2.4A	-
Allowable output power		12W
CC Output	2.1	2.4	2.5A	CV 4.75V Test model
Output ripple	-	-	< 150mV	Rated load,oscilloscope Bandwidth setup as 20MHZ, parallel with 10uF and 0.1uF capacitor,
Discharging efficiency	>92%	-	-	Test requirements: test 4 model average efficiency of 25% 50% 75% 100% of full load; test at PCBA board end.
Limited current protection	2.5A		3A	The output will turn off if the output current is exceed specified value;
Output over-voltage protection	6.2V	-	6.8V	The output will turn off when		the product doesn't
					work properly and the output voltage is exceed
					specified value.
Short circuit protection	-	suppor t	-	The output will turn off if the output port is short circuit by wire or external devices; the product will be automatically recovery work normally
				after cutoff the loading.

Item

Min

Type

Max

Remark

AC Sine wave output features:

Item	Min	Type	Max	Remark
Output voltage range	200V	220V	240V
Rated output current	-	0.9A	-
Rated output Power		200W
Output frequency	47 Hz	50 Hz	53Hz
Non-loading current			600mA
Discharging efficiency	>85%	-	-	Test requirements: test 4 model average efficiency of 25% 50% 75% 100% of full load; test at PCBA board end.
Over loading protection	220W	-	300W	The output will turn off if the output power is exceed specified value; the LCD blink display AC ! while Key’s LED blinking and buzzer is ringing 3 times. The product will recover work normally after cut off the loading and press key button.
Over temperature protection Of AC board	80℃	-	100℃	Tthe output will turn off, the product can be recovery work normally after temperature down and press the key button
Over temperature recovery Of AC board	70℃	-	80℃
Fan start	55℃		65℃
Fan stop	45℃		55℃
Short circuit protection	-	suppor t	-	The output will turn off and the LCD blink display AC ! while Key’s LED blinking and buzzer is ringing 3 times. The product will recover work normally after cut off the loading and press key button.

Remark: the fan will stop runing if the the AC board was temperature protection.

Automatic power off parameter:

Item		Min	Type	Max	Remark
USB1 turn-off current	-		80 mA	100 mA
USB2 turn-off current	-		80 mA	100 mA
DC turn-off current	-		50mA	80 mA
AC turn-off power	-		3W	4W
TYPE-C turn-off current			50mA	80mA
LED light turn-on	-		-	-	The automatic will be not available while LED light is turn on.

Remark:

Above parameter value only specified for each one port, the connect more than one port, the turn-off current will count all the port of current.
The default setting is turn-on the automatic power off function,the user can press the DC + AC key button for 3S, the buzzer short ringing 2 times, the automatic power off function will be turn-off; press the DC + AC key button for 3S again, the buzzer long ringing 1 time,the automatic power off function will be recovery work normally;
The automatic power off function also be recovery work normally after re turn-on the product After turn off the product ≥10S.

3.5 LED light function:

LED Current	-	150mA	250 mA
LED Voltage	-	18V	21V
LED Power	-	3.6W	5.25W
Lamp color temp.	-	4500K	-
Lamp qty.		12

4.Battery features:

No.	content	Testing method	Remark
1	Charge cut-off voltage	13.8V
2	Discharge cut-off voltage	8.8V
3	Standard charge	Under the condition of the ambient temperature of 25±2℃, Charge the battery at constant current of 0.2C to reach 13.8V. Then charge the battery at constant 13.8V voltage until the charging current decreasing to 0.02C.
4	Standard discharge	After the standard charging,rest for 1 hour then discharge to 8.8V@0.2C.
5	Shipments voltage		Quantity of electricity≤30 %
6	Maximum Charge Current	≤12A
7	Maximum continuous working current	≤30A	Instantaneous current≤ 60A time≤2S
8	Rated capacity	Typical capacity:250000mAh Minimum capacity:24600mAh-5%	standard discharge after standard charge
9	Operation temperature range	charge:0~40℃	humidity:60±25% 60±25%R.H
9	Operation temperature range	discharge:-10~40℃	humidity:60±25% 60±25%R.H
10	Storage temperature	≤1 month: -20 ~ 45℃	60±25%R.H Best 10~25℃ for
		≤3 months: -10 ~ 30℃	long-time storage
		≤1 year: 0 ~ 30℃	long-time storage
11	Impedance	<80mΩ
12	Weight	Approx:≈2400g

5.Environment features:

LCD Function	Over temperature warning, display the AC ! and buzzer ringing 3 times when temperature protection action
	Display current total charging power, discharging power.
	The key button’s LED blinking during abnormal of AC i protection action
LED function	key button with LED
Discharge compatibility	The specified devices can be quick charge available.
Working temperature	Charging: 0-40 °C Discharging: -10-40 °C
Storage temperature	-20 ~ 45℃
Working Humidity	20-90%RH
Storage Humidity	10-95%RH

Safety features:

6.1:ESD features:

ESD

Environment temperature:15~27℃;
Humidity: ≤50%;
Test location: available touched metal and other parts.

Contact Discharge

+/-4kv, Normal recovery function allowed

Air Discharge

+/-8kv, Normal recovery function allowed

Dielectric Strength :

Dielectric

Strength

(Hi- pot)

Inverter output L/N VS DC Input

3000VAC 50Hz/10mA(Max)/60 Second,

No breakdown and flashover

Delivery Time:

- Material Preparation Time: 7-15 days (or inventory)

- Production & Assembly Time 3-10 days

- Testing & Packaging Time: 2-10 days

- Total Delivery Time: 30-45days

- The faster delivery could be negotiable.

Factory photo:

Contact with our sales team for your OEM and ODM order.

OEM/ODM Service:
If you want to display your own brand logo in products, bags, labels or anywhere. Or you need to develop battery packs according to your product orientation. Our OEM and ODM services are ready to do it.

Packing:
According to Stardard Export Packing.
Carton box, wooden box, wooden pallet

Ryder Electronics established in Shenzhen on July 18, 2005, mainly in the business of battery packs. In 2009 the company passed ISO9001 and improved the product quality standard to fulfill the high-end requirements from our customers.

In 2012, Ryder Electronics moved to a new facility and expend the production capacity, the Productivity improved nearly 10 times than before.

In 2013, Ryder Electronics imported ERP (SAP) system to supervise order execution process.

In 2017, Ryder Electronics expanded the SMT, imported high-speed patch machine from Germany.

Until now the factory grows into a modern enterprise which integrated injection molding, PCB designing, SMT and battery pack assembling services.

In 2018 the company passed ISO14001certification, introduced automated battery production line to further improve the production quality and capacity.