|
[China]
Trade Verify
Address: No 350 East Nanyanggang Road , Shanyang Town ,Jinshan District ，Shanghai China
Contact name:Sky
Jianglang Technology Co. Ltd. |
|
Verified Suppliers
|
|
|
ATEX Air Driven Diaphragm Pump High Flow 3 Inch
Stainless Steel Pump features
1. High temperature wax casting. Smooth surface and good appearance.
2. Four bolts connection design, good seal and good dry suction.
1. Our raw material, Hytrel from Dupont, Santoprene from Exxon, PTFE from Daikin and Saint-Gobain etc.
2. Increase the height of the diaphragm's arch portion, ensure to reduce the force to the diaphragm edge portation and avoid the diaphragms been pull out.
| Max Working Pressure | 120 psi(0.84Mpa, 8.4bar) |
| Max Flow Rate | 270 gpm ( 1022lpm ) |
| Max Reciprocating Speed | 135 cpm |
| Max Suction Height (Dry Sucking) | 5m |
| Max Permitted Grain | 0.37 in ( 9.4mm) |
| Max Air Consumption | 180scfm(90L/s) |
| Air Inlet Size | 3/4 in.npt(f) |
| Air Outlet Size | 1 in.npt(f) |
| Fluid Inlet Size | 3 in. |
| Fluid Outlet Size | 3 in. |
| Net Weight | Stainless Steel 122 kg |
Packing & Shipping:
Hytrel Material used for seats, balls & diaphragms
• Good abrasion resistance
• Often substituted for Buna-N
INSTALLATION
Be sure the mounting can support the weight of the air diaphragm
pump, hoses, and accessories, as well as the stress during
operation progress.
During installation, make sure that the air diaphragm pump has been
fixed with bolts on the mounting feet.
In order to facilitate the operation and maintenance, the
maintenance space should be enough during installing the air
diaphragm pump.
While fastening the air diaphragm pump, rubber pad can be padded to
reduce the noise and vibration during operation.
