Home Companies Dongguan Zhongli Instrument Technology Co., Ltd.

Horizontal Environmental Climate Low Temperature Test Chamber 620×530×580mm 2.5KW

Dongguan Zhongli Instrument Technology Co., Ltd.

Contact Us

Trade Verify

Address: No.62, Xinhe Management of Area, Wanjiang District, Dongguan city, Guangdong province ,China

Contact name:Fiona Zhong

Inquir Now

Dongguan Zhongli Instrument Technology Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Horizontal Environmental Climate Low Temperature Test Chamber 620×530×580mm 2.5KW

City & Province dongguan guangdong
Categories Telescope & Binoculars
InquireNow

Product Details

Environmental Climate Horizontal Low Temperature Test Chamber

 

Environmental Test Chamber.pdf

 

Equipment summary:

 

Low temperature test chamber is used to test the material's property low-temperature, such as electrical, electronic products., as well as their original devices, The testing equipment is mainly made according to the national standard and user-defined requirements, it simulate the environment to test proformance of material as well as other relevant characteristics of physical at low temperature, Through testing to determine product performance whether it is still be able to meet the intended requirements.

 

Corresponding standard:

 

1.GB 10589-89 low temperature testing condition
2. GB/T5170.2-1996 basic parameters of environmental testing method for Electrical and electronic products,
3. GB2423.1-89 The basic test regulation for electrical and electronic products, Test A: low-temperature test method
 

Applicable industries :

 

Applied to test the prodcuts quality, such as electronic, plastic products, electrical appliances, instruments, food, vehicles, metals, chemicals, building materials, aerospace, medical care ... and so on.

 

ModelZL-6020A
Inner size D×W×H620×530×580mm
Outer sizeD×W×H1800×910×760mm
IndextemperatureRT to -40oC
fluctuate/uniformly≤±0.5oC /.+2oC -3oC
Cooling time25oC to -30oC about 80min
Control systemControllerLED digital P,I,D, +S,S,R.microcomputer controller
accuracySetting accuracytemperature ±0.1oC, directed accuracytemperature ±0.1oC, resolution ±0.1oC
Cooling systemTotally enclosed air-cooled single-stage compression refrigerate mode / original from French "Taikang" / totally enclosed air-cooled re-compression refrigerate mode
Compressor start delay5min
Circulatory systemTemperature, low-noise, air-conditioning-type motor. Multi-vane centrifugal wind wheel
MaterialOuter materialHigh-quality carbon steel plate. Phosphide electrostatic spray treatment / SUS304 stainless steel hairline treatment
Inside materialSUS304 High-quality stainless steel light board
insulationRigid polyurethane foam, ultra-fine glass fiber cotton
Standard collocationa set of Multi-heated glass window attached lighting, testing product shelf 2 pcs, test leads holes (25,50 mm) 1 pcs
ProtectorLeak current, short circuit, over temperature, motor overheating, over-pressure compressor, overload, over-current protection
Timer0.1 to 999.9(S.M.H.) adjustable
Power2.5KW
VoltageAC380V±10% 50±0.5Hz Three-phase five-wire system
Environmental temperature5oC to 30oC ≤85%R.H
Annotation
1. Above data were measured at temperature (QT) 25oC and no-load condition.
2. Can be customized non-standard-type high-low-temperature testing mechine according to uses requirements

 

Main Features:

1.Refrigerator adopts French original "Taikang" totally enclosed compressor.

2. Refrigeration system adopts unit or binary type low temperature circuit system design.

3. the use of multi-wing fan strong air circulation, to avoid any dead space, can make the test area temperature distribution evenly.

4.wind circulation out of the wind back to the design, wind pressure, wind speed are in line with the test standards, and can make the door open instant temperature back to stable time fast.

5. the box adopts horizontal, generous appearance, and large volume of the inner box.

6. The temperature control adopts imported touch button instrument, simple operation setting.

7. After the data and test conditions are input, the controller has a lock function to avoid changing the temperature value by human touch.

8. With P.I.D automatic calculation function, the temperature change conditions can be corrected immediately, so that the temperature control is more accurate and stable.

Hot Products

LCD Display Constant Temperature Humidity Climatic Chamber Lab Incubator Environmental Test Chamber...
Double Column Universal Testing Machine Tensile Test With Touch Screen Tensile Testing Machine.pdf ...
Desktop Computer Controlled Universal Testing Machine Price Tensile Testing Machine.pdf Correspondin...
30ton Computer Controlled Universal Testing Machine Manufacturer Tensile Testing Machine.pdf Fields ...
Economical Material Universal Testing Machine Manufacturer With Computer-type The Main Function: ...
Temperature and Humidity Vibration Three Comprehensive Testing Chamber Environmental Test Chamber...