|
Trade Verify
Address: No.62, Xinhe Management of Area, Wanjiang District, Dongguan city, Guangdong province ,China
Contact name:Fiona Zhong
Dongguan Zhongli Instrument Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Environmental Test Chamber.pdf
Compressor: fully hermetic compressor imported from France
Refrigerant: Environmental refrigerant R404A
Condenser: fin type with heat dissipation motor
Evaporator: fin type multi section automatic load capacity adjustment
Other accessories: desiccant, refrigerant flow window, repair valve
Expansion system: refrigeration system with capacity control
Technical parameters:
| Model | ZL-6019 High And Low Temperature Test Chamber | |||
| Inner size D*W*H | 40*50*40 cm | 40*50*50 cm | 50*60*50 cm | |
| index | temperature | -40oC to 150oC | ||
| fluctuate/uniformly | ≤±0.5oC /.+2oC to 3oC | |||
| Heating-up time | -40oC to 100oC about 55min | |||
| Cooling time | 25oC to -70oC about 80min | |||
| Control system | controller | LED digital P,I,D, +S,S,R.microcomputer controller | ||
| accuracy | Setting accuracytemperature ±0.1oC,directed accuracytemperature ±0.1oC,resolution ±0.1oC | |||
| sensor | Platinum resistance PT100Ω/MV | |||
| Heating system | Independent system, nickel-chromium alloy electric heating type heater | |||
| Cooling system | Totally enclosed air-cooled single-stage compression refrigerate mode / original from French "Taikang" / totally enclosed air-cooled re-compression refrigerate mode | |||
| Circulatory system | Temperature, low-noise, air-conditioning-type motor. Multi-vane centrifugal wind wheel | |||
| material | Outer material | High-quality carbon steel plate. Phosphide electrostatic spray treatment / SUS304 stainless steel hairline treatment | ||
| Inside material | SUS304 High-quality stainless steel light board | |||
| Insulation material | Rigid polyurethane foam, ultra-fine glass fiber cotton | |||
| insulation | Double-resistant high-temperature aging of silicone rubber seal | |||
| Standard collocation | a set of Multi-heated glass window attached lighting, testing product shelf 2 pcs, test leads holes (25,50 mm) 1 pcs | |||
| Protector | Leak current, short circuit, over temperature, motor overheating, over-pressure compressor, overload, over-current protection | |||
| Timer | 0.1 to 999.9 (S,M,H)adjustable | |||
| Voltage | AC380V±10%, 50±0.5Hz Three-phase five-wire system | |||
| environmental temperature | 5oC to 30oC ≤85%R.H | |||
| annotation to uses requirements | ||||
Detailed Configuration And Software Features:
I. Structure and Material:
1. Inner box material: mirror stainless steel plate (SUS 304 thick 1.0mm);
2. Outer box material: stainless steel plate (1.0mm thick);
3. Insulation layer design: effectively avoid condensation on the top of the box;
4. Insulation layer: insulation layer (rigid Polyurethane foam, 100mm thick);
5. Box door: single piece door, single window, left opening. Flat recessed handle, back knob:SUS #304.Double insulation airtight tight, effectively isolate insulation from heat exchange inside and outside the box;
6. Observation window: three layers of vacuum glass, easy to observe the use of test products, size: 320X250X40mm.
7. Window anti-sweat: electric heating device, to prevent water condensation;
8. Lighting design: high brightness window lighting energy-saving lamps, easy to observe the test products;
9. Test hole: 50mm diameter on the left side of the body with a stainless steel hole cover and a silicone plug (optional multiple or 100mm);
10. Machine pulley: easy to move (to adjust the placement) and strong bolts (fixed position) supporting the use;
11. Box shelves: stainless steel SUS # 304 square perforated steel shelves 2 pieces and 2 sets of tracks (to adjust the spacing);
12. Machine weight: about 200KG
