|
Trade Verify
Address: No.62, Xinhe Management of Area, Wanjiang District, Dongguan city, Guangdong province ,China
Contact name:Fiona Zhong
Dongguan Zhongli Instrument Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
200T Oscillating Disk Rubber Vulcameter , Rubber Plastic MDR Moving Die Rheometer
The main technical parameters:
| Model | 200T Oscillating Disk Rubber Vulcameter , Rubber Plastic MDR Moving Die Rheometer |
| Temperature tester | Room temperature to 200°C |
| Temperature accuracy | ≤ ±0.3°C |
| Temperature resolution | 0.1°C |
| Torque range | 0-5N.M,0-10N.M,0-20N.M |
| Torque resolution: | 0.001NM |
| Motor rotating speed | 100 times / min |
| Rotor range | Adopt 4 setting: 25, 50, 100, 200lbs per inch |
| Die cavity frequency | 1.7Hz |
| Sway angle | ±0.5°, ±1°, ±3° |
| Air compression | 0.5Mpa--0.65MPa |
| Ambient temperature | 0-35°C |
| Test result | Printing:date,time,temperature,vulcanization curve,temperature curve,ML,MH,ts1,ts2,t10,t50,Vc1,Vc2. |
| Dimension | 131*56*62cm |
| Power | Single phase, 220V±10%, 50Hz |
| Display | Windows 7 + software |
| Weight | 250kg |
Related Machine:
1.Banbury Mixer 2.Vulcanizing Press Machine
3.Rubber Mixing Mill 4.Three-Roll Grinding Mill
5.Injection Moulding Machine 6.Moving Die Rheometer
Catalog about Rubber Products:
Summary:
The use of single-chip control, including: host, temperature
measurement, temperature control, data acquisition and processing,
sensors and electrical interlocking and other components. The
measurement and temperature control circuit consists of a
temperature controller, a platinum resistor, and a heater. It can
automatically track changes in the power grid and ambient
temperature, automatically correct PID parameters, and achieve
rapid and accurate temperature control. The data acquisition system
and the electromechanical chain complete the automatic detection of
the torque signal of the rubber vulcanization process, automatic
real-time display of temperature and set values. After
vulcanization is completed, automatic processing, automatic
calculation, printing vulcanization curve and process parameters.
Show vulcanization time, sulfurizing power torch.
Corresponding standard:
Accord with GB/T16584”rubber- no rotor rheometer to measure the characteristics of vulcanized”ISO6502:1991
and ASTMD5289-95
The Reasons For Buying
