1.This machine adopts man-machine interface (Weilun color 7 inch)
touch screen + (Mitsubishi) PLC control; All parameters can be
programmed through the man-machine interface, and can store 0-50
different data sets.2, by the stepper motor control the level of rise and fall, the
height of the liquid level adjustable (0.1-60mm) and speed
adjustable.3, and the dipping time adjustable (0-999 seconds), at the same
time with the alarm time, the second vacuum, automatically into the
air, automatically open the lid and other functions.4, the vacuum pump selection XD-020-380V, vacuum rapid, vacuum can
be set (time control)5, the vacuum box L700 * W 530 * H400 selection of high quality
steel GB 6mm, vacuum cover selection of international quality steel
welded together.6, sealing system used 12mm imported silicone seal for sealing.Automatically open the lid, automatic charge and discharge gas,
liquid level automatic lift, PLC + touch screen control, can
effectively prevent the pin dip paint, reduce the secondary solder!ZL-1034A Vacuum Impregnation Machine(Single Cylind...
Parameter:
Power | AC220V / 380V 50Hz / 60Hz |
Power | 1HP |
Positive pressure in cylinder | 0.6MPa (6.12KG/CM) |
negative pressure in cylinder | 1.02×10MPa |
Inner dimension | L700 * W530 * H200mm |
External dimensions | L1500 * W900 * H1100mm |
Weight | about 220Kg |