|
[China]
Trade Verify
Address: No. 1 Kangting Street, Huangdao New District, Qingdao, China
Contact name:Jake Chen
Qingdao Shun Cheong Rubber machinery Manufacturing Co., Ltd. |
|
Verified Suppliers
|
|
|
Application:
This rubber compound two roll mill is mainly used in Rubber & Plastic Product factory for Natural Rubber Mixing(plasticating), Raw Rubber and Compound mixing, rubber warm-up mixing and pressing sheet.
Features:
1. Machine frame, gland and base are all welded through steel plates, after annealing, completely processed by precise machine tool. The whole machine frame, gland and base are all of strong rigidity, won't deform and the surface is smooth and anti-wear.
2. The 2 ends of the rolls adopt double roller rolling aligning
bearings. Bearings adopt automatic thin oil lubrication system.
Roll Bearings adopt automatic thin oil lubrication style.
3. Rollers cooling water adopt copper rotary joints. Rollers are
made of chilled cast iron, front and rear rollers are hollow type,
so as to achieve better temperature control effect, the working
surface hardness is 68 ~ 72HSD.
4. Reducer adopts square ZSYF355 hard tooth gear reducer, 6 grade
precision, very low noise, long service life.
5. Roller bearings: High precision self-aligning roller bearings.
6. Emergency Brake Equipment: In front and rear of the machine are
equipped with 4 emergency stopping buttons and also in the mill
base is equipped a Kick-style stop switch.
7. Equipment safety devices. To protect the machine main parts from
damage, the machine is connected with safety pads protection
device. When the machine is overloaded, the safety disc will
rupture protecting the main parts of the equipment from damage.
8. Our electric control device is mainly composed of electric
motor, brake solenoid, limit switches and electrical controlling.
This device is installed on the machine base (including electric
controlling system) along with the machine packed and transported
together. Before the machine leaving the factory, the wire from the
motor to electric control cabinet is connected. The customer only
needs to connect the control cabinet wire to the power supply
before using the machine.
| Model | Roller(DxL)(mm) | Front Roller Linear Speed(m/min) | Friction Ratio | Motor Power (KW) | Overall Dimension (LxWxH)(mm) |
| XK-160 | φ160x320 | 8.95 | 1:1.37 | 5.5 | 1500x750x1500 |
| XK-230 | φ230x600 | 10.21 | 1:1.19 | 15 | 2800x1200x1120 |
| XK-250 | φ250x620 | 14.1 | 1:1.17 | 18.5 | 3400x1500x1650 |
| XK-300 | φ300x750 | 15.1 | 1:1.25 | 22 | 3500x1600x1700 |
| XK-360 | φ360x900 | 16.25 | 1:1.25 | 30 | 3780x1850x1750 |
| XK-400 | φ400x1000 | 18.65 | 1:1.27 | 37 | 4350x1850x1785 |
| XK-450 | φ450x1200 | 24.26 | 1:1.27 | 55 | 5200x2380x1840 |
| XK-560 | φ560xφ510x1530 | 27.72 | 1:1.2 | 90 | 5845x2284x1978 |
| XK-550B | φ550x1500 | 27.94 | 1:1.22 | 110 | 5870x2475x2045 |
| XK-610 | φ610x2000 | 28.42 | 1:1.17 | 160 | 7070x2290x1840 |
| XK-660 | φ660x2130 | 28.6 | 1:1.24 | 245 | 7465x3662x2080 |
| XK-710 | φ710x2200 | 30 | 1:1.09 | 280 | 7500x3500x1800 |
1,Our engineers can design target machines for customers and send
them the drawing to confirm. We are always on the side of saving
your cost.
2,In the process of production, we will take photos and send to
customers for their track the progress.
3,Documents such as packing list, commercial invoice, and bill of
lading etc. will be sent after the delivery.
4,We could supply free English foundation DWG, installation
drawing, user guide, maintenance manual and part drawing.
5,We supply overseas engineer service and help to train your
workers to operate the machine.
