|
[China]
Trade Verify
Address: No. 1 Kangting Street, Huangdao New District, Qingdao, China
Contact name:Jake Chen
Qingdao Shun Cheong Rubber machinery Manufacturing Co., Ltd. |
|
Verified Suppliers
|
|
|
Reclaimed Rubber Sheet Making Machine With CE&ISO
1. Reclaimed rubber sheet line Description:
Full Automatic Production Line Process:
Rubber Powder →Dynamic desulfurization Tank→ Rubber Mixing Machine→Rubber Sheet →Reclaim Rubber Refining Mill → Reclaim Rubber
Application:
2. Reclaimed rubber line lightspots display:
Environmental protection: No waste gas and waste water
Daily output: 30 tons
Quality: Meet and exceed national standards
Energy consumption: Powder saving more than 20% than dynamic desulfurization tank per
ton
Rubber Powder mesh: 8-24 mesh
Nominal strength under tension: ≥ 10MPa
Reclaimed rubber mixing mill machine
Usage: Horizontal type rubber mixing mill is mainly used in following cases for reclaimed rubber products factory: reclaimed rubber refining, raw rubber and compound ingredient mixing, warming refining and sheeting of glue stock. This machine can reassure well lubricating and easy operation for it adopting oil cup lubrication.
| Technical parameter Type | XKJ-400 | XKJ-450 | XKJ-480 |
| Front roll diameter(mm) | 400(Waist-drum) | 450(Waist-drum) | 480(Waist-drum) |
| Rear roll diameter(mm) | 518(Waist-drum) | 510(Waist-drum) | 612(Waist-drum) |
| Working length of rolls (mm) | 760 | 800/1000 | 800 |
| Front roll surface speed (m/min) | 25 | 48/32 | 22.97 |
| Friction ratio | 1: 1.707 | 1: 1.82 | |
| Max. nip(mm) | 10 | 10 | 15 |
| Motor power (kw) | 45 | 55 | 75 |
| Overall dimension Length× Width× Height (mm) | 4770× 2300 × 1835 | 4700× 2100 × 1400 4900× 2300 × 1450 | 5070× 2800 × 1978 |
| Key words | Rubber machinery, refining machine, reclaimed machine, rubber refining mill, rubber machine | ||
| Technical parameter Type | XKJ-400 | XKJ-450 | XKJ-480 |
Reclaimed rubber refining mill
Usage: is mainly used for refining of reclaimed rubber and rubber sheeting
Features:.
1. The rollers are made of chilled cast iron with wear-resistant hard surfaces.
2. The two rollers are smooth ones with bored cavities and can be cooled homogeneously.
3. The protective device is provided to protect the main parts from damage due to overload. In case of emergency, the safety rod is pulled down and the rollers will be stopped immediately.
Packaging
Equipment painting completed before delivery, and then wrapped with stretch film, avoid rubbing the paint off the surface, wooden packaging can be customized, key parts, such as electronic control box, will be wrapped by shockproof packaging materials, and then packed in wooden cases.
FAQ
1. What does your factory do regarding quality control?
We pay much more importance to quality control from the very beginning to the end of production. Every machine will be fully assembled and carefully tested before shipment.
2. What's the machine quality guarantee?
Quality guarantee time is one year.We choose world famous brand components to keep our machine in perfect working condition.
3. Are you able to give installation and commissioning overseas?How long time will it take?
Yes, we can supply overseas service and technical support but customer needs to pay for the cost of the installation. Small machine usually takes within 2~3 days. Big production line usually takes about 30 days.
4. How can I trust you to deliver the right machine as I ordered?
We will absolutely deliver a good quality machine as we discussed and confirmed in the order. The core of our company culture is innovation,qua
lity,integrity and efficiency. Also we have had many good cooperation with world famous rubber production manufacturers.
If you come to our factory, we can show the user around us.
5. How can we go to your side?
We are located in Qingdao City, Shandong province, China. The name of airport is Qingdao Jiaodong airport. We will pick up you at the airport.
Before leaving factory, this plate vulcanizing press needs to pass 24 hours' pressure test, pressure maintaining to test the bearing of the hydro-cylinder and piston stroke and guarantee no oil leakage and seeping to avoid unnecessary quality problems.
We can design and manufacture all kinds of non-standard plate vulcanizing press according to the customers' definite requirements.
Our Services
♦ Our engineers can design target machines for customers and send them the drawing to confirm. We are always on the side of saving your cost.
♦ In the process of production, we will take photos and send to customers for their track the progress.
♦ Documents such as packing list, commercial invoice, and bill of lading etc. will be sent after the delivery.
♦ We could supply free English foundation DWG, installation drawing, user guide, maintenance manual and part drawing.
♦ We supply overseas engineer service and help to train your workers to operate the machine.
