|
[China]
Trade Verify
Address: Room 1002, Xinghua Building,Zhengzhou City, China
Contact name:Wu
Shanghai Songjiang Jingning Shock Absorber Co.,Ltd. |
|
Verified Suppliers
|
|
|
Single Way Sleeve Compensator
Maintenance free direct buried single way sleeve compensator is one of the compensators. It is widely used in many industries because of its advantages of long service life, good corrosion resistance, no requirement for chloride ion content, bidirectional compensation and increasing compensation amount.
Performance of single way sleeve compensator
The features of the expansion capacity and the strong pressure resistance of the maintenance free direct buried single way sleeve compensator are as follows:
Maintenance free direct buried single way sleeve compensator plays an important role in many industrial fields. Different types of compensators have different application range and methods. The application of compensator joint in heating pipe. In order to prevent the deformation and damage of the pipeline due to the thermal elongation or temperature stress during heating up of the heating pipe, a compensator should be set on the pipeline to compensate the thermal elongation of the pipe, so as to reduce the stress of the pipe wall and the action on the valve or support structure.
Single way sleeve compensator structure
Technical data of single way sleeve compensator
Nominal Diameter | Compensation Single Way △ | Connection Tube Outer Diameter | Maximum Outer Diameter | Length
L | Single Way Friction KN |
| mm | mm | mm | mm | mm | 1.6Mpa |
| 50 | 150 | 57 | 230 | 610 | 1.72 |
| 65 | 150 | 76 | 250 | 610 | 2.68 |
| 80 | 150 | 89 | 265 | 610 | 3.42 |
| 100 | 150 | 108 | 280 | 610 | 4.51 |
| 125 | 150 | 133 | 310 | 610 | 5.23 |
| 150 | 250 | 159 | 335 | 810 | 7.89 |
| 200 | 250 | 219 | 415 | 810 | 13.10 |
| 250 | 250 | 273 | 465 | 860 | 19.5 |
| 300 | 250 | 325 | 520 | 860 | 24.72 |
| 350 | 250 | 377 | 570 | 860 | 29.15 |
| 400 | 300 | 426 | 620 | 970 | 37.63 |
| 450 | 300 | 480 | 670 | 970 | 44.59 |
| 500 | 300 | 530 | 730 | 990 | 52.16 |
| 600 | 300 | 630 | 830 | 990 | 59.47 |
| 700 | 400 | 720 | 930 | 1280 | 65.12 |
| 800 | 400 | 820 | 1030 | 1280 | 78.37 |
| 900 | 400 | 920 | 1135 | 1280 | 96.53 |
| 1000 | 500 | 1020 | 1235 | 1550 | 133.5 |
| 1100 | 500 | 1120 | 1340 | 1550 | 147.21 |
| 1200 | 500 | 1220 | 1440 | 1550 | 158.32 |
Note:Flange supply according to GB/T 9119-2000 standard ,also can supply according to clients’other requirements.
Single way sleeve compensator advantage
1. The single way sleeve compensator has a long service life, and its fatigue life is equivalent to that of the pipeline. After special treatment, the sliding surface has good corrosion resistance in salt water and salt solution, which is more than 50 times higher than that of austenitic stainless steel.
2. The maintenance free direct buried single way sleeve compensator has no requirement for chloride ion content, and is especially suitable for the system with excessive chloride ion content in medium or surrounding environment.
3. The maintenance free direct buried single way sleeve compensator can be divided into one-way and two-way compensation structures. The two-way compensation structure is characterized by that the sliding sleeves at both ends of the compensator always slide freely no matter where the medium flows from, so as to achieve two-way compensation and increase the compensation amount.
Single way sleeve compensator application
Single way sleeve compensator is called tubular expansion joint and pipeline expansion joint, which is the compensation device of hot fluid pipeline, mainly used for the auxiliary equipment of linear pipeline. It is suitable for hot water, steam, grease and other media. Through the sliding movement of the sliding sleeve, the thermal expansion compensation can be achieved.
FAQ
Q1:Can the single way sleeve compensator be marked with customized logo?
A1:Yes,the single way sleeve compensator can be marked with your logo. We could provide OEM&ODM service for single way sleeve compensator.
Q2:What’s the face to face length of single way sleeve compensator?
A2:The face to face length of single way sleeve compensator can be L130, L152,L203... We also could accept customized length according to your requirements.
Q3:Can you provide drawings of single way sleeve compensator?
A3:Yes,we could provide drawings of single way sleeve compensator for you.Please contact us to get the drawing of single way sleeve compensator.
Q4:What certificates of single way sleeve compensator can you provide?
A4:We could provide CE,ISO certificate for our single way sleeve compensator.
Q5:Can we get a sample of single way sleeve compensator?
A5:Yes,we could provide samples for you to test the quality of our single way sleeve compensator.
Q6:What’s the warranty period of single way sleeve compensator?
A6:We provide 18 months’ warranty for our single way sleeve compensator.
