|
[China]
Trade Verify
Address: Add.: No. 338 mingxi road, Huangdao district, Qingdao Postal code: 266400
Contact name:
Qingdao Beishun Environmental Protection Technology Co.,Ltd |
|
Verified Suppliers
|
|
|
Column Type Hydraulic Vulcanizing Press For Making Rubber Products
Applications
We provide a wide range of rubber vulcanizing hot press, ranging
from 15 to 10,000 tons mostly made-to-order products. We provide
turnkey solution and technical service, for complete machinery
installation and production line planning. The Rubber Plate Vulcanizing Press for rubber is the main molding
equipments for various of rubber molding products and non-molding
products, The Rubber Plate Vulcanizing Press is also suitable for
molding to thermosetting plastic, bubble, resins, Bakelite, sheet
metal, building materials and other molding products, with simple
structure, high pressure, wide applicability, and high efficiency.
It is also named Rubber mat vulcanizing press, rubber molding
machine, rubber vulcanizing machine, rubber vulcanizer, rubber
vulcanizing press, rubber moding press, hydraulic press, hot press,
etc.
Features of Automatic PLC Rubber Vulcanizing Press Machine,
Hydraulic Vulcanizer Press Machine, floor Mat/rings gasket Moulding
Curing Press
1.This rubber vulcanizing press machine with PLC control, high
production efficiency.
2. The presses heating method with steam heating or electrical
heating we can as our clients required to design.
3. Press with automatic warning device, high safety and convenient.
4. The rubber machines used for rubber vulcanization are known as
rubber vulcanizing machines.
5. This rubber vulcanizing press machine strengthens raw rubber by
chemically treating it and make rubber harder and stronger.
Machine specification of Rubber Vulcanizing Press Machine
Model
| Total Pressure (MN) | Daylight (mm) | Working Layer No. | Piston Stroke (mm) | Main Motor Power (KW) | Overall Diameter (L x W x H) (mm) |
| XLB-350×350×2 | 0.25 | 125 | 2 | 250 | 2.2 | 1200×580×1200 |
| XLB-400×400×2 | 0.50 | 125 | 2 | 250 | 2.2 | 1400×500×1400 |
| XLB-600×600×2 | 1.00 | 125 | 2 | 250 | 2.2 | 1880×820×1680 |
| XLB-750×850×4 | 1.60 | 125 | 4 | 500 | 3 | 1730×930×2460 |
| XLB-900×900×2 | 2.5 | 200 | 2 | 400 | 4 | 2345×960×1385 |
| XLB-1200×1200×1 | 3.15 | 300 | 1 | 300 | 4 | 2800×1300×2300 |
| XLB-1300×2000×1 | 5.60 | 400 | 1 | 400 | 8 | 2000×1860×2500 |
| XLB-1500×1500×1 | 8.00 | 800 | 1 | 800 | 16.5 | 2200×2200×4300 |
| XLB-1500×2500×1 | 15.00 | 400 | 1 | 400 | 11 | 3000×2500×3300 |
| XLB-2000×2000×1 | 20.00 | 400 | 1 | 400 | 11 | 3600×3000×3300 |
Flow of machine motions:
Initial state →Put the material into the mould, reposit the ejector
cylinder →Load the mould →Close the mould quickly→ Clamp the mould
slowly, increase pressure →Exhaust→Vulcanization start
→Vulcanization finish→Open mould quickly→ Pushing out the mould
→Ejector cylinder works, and separate mould and product→Take out
the product
