|
[China]
Trade Verify
Address: 5F, No.200 Guoding Road, Shanghai China 201105
Contact name:Sophia Lau
Hongum Technology (Shanghai) Co., Ltd |
|
Verified Suppliers
|
|
|
Customized FRH VP ME Type Rubber Shock Absorber and Damper for Effective Vibration Control
Damping characteristics of rubber:
Rubber shock absorbers are widely used due to their effective utilization of the following characteristics of rubber:
1. High elasticity and viscoelasticity.
2. Large deformation and small modulus when compared to steel material.
3. Greater impact stiffness than dynamic stiffness, and greater dynamic stiffness than static stiffness, leading to reduced impact and dynamic deformation.
4. Freedom in choosing rubber shape, adjustable hardness through formula design, and ability to meet stiffness and strength requirements in different directions.
When choosing a shock absorber, it's important to understand its characteristics and select the appropriate type for the specific environment. Rubber shock absorbers have the added benefits of adjustable shape and hardness, higher damping ratio than other materials such as springs, shear, tensile, and compressive materials, and easy installation. Choosing the right material can greatly improve the performance and longevity of your shock absorbers.
Specifications:
| Model | Hardness (daN/mm) | A | B | C | P | F×M | CF | L | S | Average load (Kg/mm) | Maximum load (kg) | Maximum compression (mm) |
| ME8038M12W | 45 | 80 | 38 | 60 | M12 | 14×11 | 100 | 120 | 3 | 9.0 | 36.0 | 4.0 |
| ME8038M12K | 50 | 13.0 | 52.0 | 4.0 | ||||||||
| ME8038M12M | 60 | 16.0 | 64.0 | 4.0 | ||||||||
| ME8038M12H | 70 | 24.0 | 96.0 | 4.0 | ||||||||
| ME1045OM16XW | 35 | 104 | 50 | 78 | M16 | 30×13 | 140 | 186 | 4 | 16.0 | 80.0 | 5.0 |
| ME10450M16W | 45 | 24.0 | 120.0 | 5.0 | ||||||||
| ME10450M16M | 60 | 38.0 | 190.0 | 5.0 | ||||||||
| ME10450M16H | 70 | 60.0 | 300.0 | 5.0 | ||||||||
| ME1045OM16XH | 80 | 95.0 | 475.0 | 5.0 | ||||||||
| ME13271M20W | 45 | 132 | 71 | 112 | M16 | 30×13 | 182 | 230 | 5 | 55.0 | 330.0 | 6.0 |
| ME13271M20M | 60 | 80.0 | 480.0 | 6.0 | ||||||||
| ME13271M20H | 70 | 135.0 | 810.0 | 6.0 | ||||||||
| ME13271M2OXH | 80 | 220.0 | 880.0 | 4.0 |
| Model | Hardness | A | B | C | E | F | Average load kg/mm | Maximum load kg/mm | Maximum compression mm |
| FRH633008W | 45 | 63 | 30 | M | 89 | 110 | 70 | 140 | 2 |
| FRH633008M | 60 | 63 | 30 | M8 | 89 | 110 | 120 | 240 | 2 |
| FRH633010W | 45 | 63 | 30 | M8 | 89 | 110 | 70 | 140 | 2 |
| FRH633010M | 60 | 63 | 30 | M10 | 89 | 110 | 120 | 240 | 2 |
| FRH783010W | 45 | 78 | 30 | M10 | 11 | 135 | 47 | 108 | 2.3 |
| FRH783010M | 60 | 78 | 30 | M10 | 11 | 135 | 116 | 267 | 2.3 |
| FRH783012W | 45 | 78 | 30 | M10 | 110 | 135 | 47 | 108 | 2.3 |
| FRH783012M | 60 | 78 | 30 | M12 | 110 | 135 | 116 | 267 | 2.3 |
| FRH783010W | 45 | 83 | 30 | M12 | 110 | 135 | 65 | 130 | 2 |
| FRH83301OM | 60 | 83 | 30 | M10 | 110 | 135 | 98 | 196 | 2 |
| FRH833012W | 45 | 83 | 30 | M10 | 110 | 135 | 65 | 130 | 2 |
| FRH833O12M | 60 | 83 | 30 | M1O | 110 | 135 | 98 | 196 | 2 |
| FRH923510W | 45 | 92 | 35 | M10 | 123.5 | 150 | 50 | 175 | 3.5 |
| FRH923510M | 60 | 92 | 35 | M10 | 123.5 | 150 | 90 | 315 | 3.5 |
| FRH923512W | 45 | 92 | 35 | M12 | 123.5 | 150 | 50 | 175 | 3.5 |
| FRH923512M | 60 | 92 | 35 | M12 | 123.5 | 150 | 90 | 315 | 3.5 |
| FRH1063812W | 45 | 106 | 38 | M12 | 143 | 175 | 70 | 252 | 3.6 |
| FRH1063812M | 60 | 106 | 38 | M12 | 143 | 175 | 150 | 450 | 3 |
| FRH1063816W | 45 | 106 | 38 | M16 | 143 | 175 | 70 | 252 | 3.6 |
| FRH1063816M | 60 | 106 | 38 | M16 | 143 | 175 | 150 | 450 | 3 |
| FRH1254316W | 45 | 125 | 43 | M16 | 156 | 192 | 88 | 352 | 4 |
| FRH1254316M | 60 | 125 | 43 | M16 | 156 | 192 | 185 | 740 | 4 |
| FRH1505016W | 45 | 150 | 50 | M16 | 182 | 218 | 120 | 720 | 6 |
| FRH1505016M | 60 | 150 | 50 | M16 | 182 | 218 | 220 | 1320 | 6 |
| FRH1505020W | 45 | 150 | 50 | M20 | 182 | 218 | 120 | 720 | 6 |
| FRH1505020M | 60 | 150 | 50 | M20 | 180 | 218 | 220 | 1320 | 6 |
VP-typed
| Model | D | H | M×1 | Hardness 45(daN/mm) | Hardness 60(daN/mm) | Hardness 70(daN/mm) | Compression (mm) |
| 3030VP20 | 30 | 30 | M8×20 | 5.1 | 7.3 | 10.0 | 6.0 |
| 3036VP23 | 30 | 36 | M8×23 | 5.6 | 8.1 | 10.9 | 7.2 |
| 5050VP28 | 50 | 50 | M10×28 | 5.1 | 7.8 | 9.9 | 10.0 |
| 5064VP35 | 50 | 64 | M8×35 | 5.0 | 7.3 | 10.0 | 13.4 |
| 7589VP37 | 75 | 89 | M12×37 | / | / | / | / |
Packaging: Each carton contains 200 pieces (quantity varies according to size).
Shipping: We offer flexible shipping options to suit your needs, including Door-to-Door Air Freight, FOB, and CFR.
We provide quick delivery via reliable couriers, including DHL, FedEx, UPS, and TNT Express, as well as Air and Ocean shipping.
Thanks to our partnerships with several courier companies, we are able to offer affordable shipping rates. We ship our products worldwide, unless otherwise stated.
FAQ:
Q: Are you a trading company or a manufacturer?
A: We're a manufacturer of industrial workshop vibration damping and micro-vibration absorbing products with many years of experience in China.
Q: What's your delivery time?
A: If we have stock, we can deliver immediately. If not, it depends on the quantity, but typically no longer than 20 working days.
Q: What are the weight and dimensions of the product?
A: The weight and dimensions vary depending on the size and quantity. Please contact us for specific details.
Q: Do you offer custom manufacturing?
A: Yes, we offer OEM services.
Q: What information do you need for a quick quotation?
A: We would appreciate having a detailed drawing for OEM orders, including the model, end connection type, flange standard and material, medium, pressure, temperature, and other working conditions.
