Hongum Technology (Shanghai) Co., Ltd |
Verified Suppliers
|
|
C113443 C113444 Diaphragm For ASCO Pulse
Valve SCG353A043 SCG353A044
Brief introduction of electromagnetic pulse valve diaphragm:
The electromagnetic pulse valve diaphragm is a whole piece of
rubber diaphragm installed with a riveting head used to block the
compressed air pipeline or the air outlet of the blocking valve, a
venting unloading hole and a bolt hole for fixed support around it.
It is the key control part in the electromagnetic pulse valve.
C113443, C113444, C113-443, C113-444 Diaphragm (Membrane) for ASCO
pulse valve SCG353A043, SCG353A044, G353A041, G353A042; TPE, NBR,
are all available; Pulse valve, also called diaphragm valve acts as
a "switch" for compressed air in the dust clean blowing system for
pulse bag filters. It is controlled by the electric signals from
the pulse jet control device. This system cleans the filter bags
cluster by cluster with high-pressure blowing to keep the pressure
resistance of the baghouse within a pre-set range, and thus ensure
the processing capability and the dust-collecting efficiency of the
baghouse.
Working principle:
The electromagnetic pulse valve diaphragm divides the pulse valve
into two air chambers. When the pressure of the rear air chamber
makes the diaphragm close to the air outlet of the valve, the pulse
valve is in a closed state, the pulse controller outputs a signal
to move the armature of the pulse valve, the vent hole of the air
chamber behind the valve is opened, and the rear air chamber
quickly loses pressure, making the The diaphragm moves backward,
the compressed air is blown through the outlet of the valve, the
pulse valve is in the open state, the injection starts, the
electrical signal output by the pulse controller disappears, the
electromagnetic pilot of the pulse valve is reset, the vent hole of
the rear air chamber is closed, and the back When the pressure of
the air chamber rises, the diaphragm of the pulse valve is close to
the air outlet of the valve, the pulse valve is in the closed
state, and the injection stops. The length of the injection time is
controlled by the controller.
Ordering Number of Diaphragm For ASCO Pulse Valve:
Valve Port Size | Pulse Valve Model | Diaphragm Model | Diaphragm Material (FKM is also available) |
3/4'' | SCG353A043 | C113444 | TPE (White), NBR (Black) |
1'' | SCG353A044 | ||
3/4'' | SCG353-052 | ||
1'' | SCG353-053 | ||
3/4'' | SGG353A043 | ||
1'' | SGG353A044 | ||
3/4'' | SGG353-052 | ||
1'' | SGG353-053 | ||
1 1/2'' | SCG353A047 | C113827 | NBR |
SGG353A065 | |||
2'' | SCG353A050 | C113685, C113686 | NBR |
2 1/2'' | SCG353A051 | ||
3'' | SCXE353.060 | C123432, C123433 | NBR |
SCG353D060 | |||
3/4'' | G3530A41 | C113443 | NBR |
1'' | G353A042 | ||
3/4'' | G353-055 | ||
1'' | G353-056 | ||
1 1/2'' | G353A045 | C113825 | NBR |
G353-066 | |||
1 1/2'' | G353A046 | C113826 | NBR |
G353A063 | |||
2'' | G353A048 | C113684 | NBR |
2 1/2'' | G353A049 |
Structural properties:
It consists of a single layer or multiple layers coated with glue
on both sides, and there are also rubber-free fabrics. According to
its shape, the method is divided into membrane pressing method.
According to the requirements of use, different rubber materials
and diaphragms of different fabrics can be manufactured. The
diaphragm has the properties of a blend of nitrile rubber and
polysulfide rubber, the properties of the rubber used for the
canvas disc diaphragm (commonly called diaphragm), and some
silicone rubber, fluororubber, and chlorohydrin
rubber developed in recent years.
Our service:
1. Packaging is neutral packing or customized packing.
2. We will reply you within 24 hours.
3. We will also provide you with good after-sales service.
4. OEM or ODM orders are welcomed.
5. Trial orders are acceptable.
6. High quality and factory price.
7. 100% ensured the quality.