7.5KW Oil Free Oxygen Booster Compressor 150bar Air Cooled

Shanghai Rotorcomp supplying oxygen compressor is completely oil-free and does not use any lubricating oil.
The cylinder uses stainless steel and the piston ring is self-lubricating. All these ensure the cleanliness and pollution-free of oxygen.
The working speed of the compressor is very slow, usually 200-400 rpm, suitable for continuous working conditions for 24 hours.
 
Generally, according to the customer’s oxygen usage, our oxygen compressors have one-stage compression, two-stage compression, three-stage compression, four-stage compression, and five-stage compression in the form of cylinders, which are single-cylinder,
 

Thanks to their oil-free, dry-running and gas-tight design, Shanghai rotorcomp compressors are ideally suited for use in the compression of oxygen.

• no gas contamination due to oil-free and dry-running compression
• Safe operation through the use of special, oxygen-compatible materials
• technically tight gas compressors during operation and at standstill

Features

• Completely oil-free and dry-running piston compressor
• Gas-tight design with integrated motor
• Environmentally friendly because it is oil-free, gas-tight and efficient
• Compressor leak rate < 0.0001 mbar l/s
• Air-cooled
• Motor powers from 3 to 44 kW
• Rotary speed range 200 to 1700 1/min
• Suction pressure max. 40 bar(abs)
• Final discharge pressure max. 200 bar(abs)
• Modular cylinder configuration with cylinder diameter up to 75 mm
• Version with 1 cylinder for 1-stage compression
• Maximum flow rate at atmospheric suction pressure approx. 150 Nm3/h
• Booster-version flow rate max. approx. 50 Nm3/h
• OEM block version available without pipework and instrumentation for integration in an OEM system
• Very robust and long-lasting construction
• Compact and foundation-free installation
• Very quiet and hence suitable for installation directly at the workplace