|
[China]
Trade Verify
Address: NO.28 MINTA RD. LITAHUI SONGJIANG DIST. SHANGHAI,CN
Contact name:
Shanghai Rotorcomp Screw Compressor Co., Ltd |
|
Verified Suppliers
|
|
|
Our KG930A high pressure crawler drilling rig is the update version of KY130 series open-pit mining machinery. It has optimized hydraulic system, drill arm components, and carriage parts. In comparison to the KY130 crawler drill, the KG930A type has 50% higher rotation speed, and 10% larger propulsion length. Thus the drilling performance is accordingly enhanced.
Advantages of KG930A compare with KY130
| KG930A | KY130 | Advantage | |
| Engine | YC4D80 | QC498 | More powerful,stable |
| Drill arm | New type drill arm | Drilling horizontal and vertical holes at the same time; low height of the horizontal hole | |
| Hydraulic system | 30 pump, large new type valve group, new type flow divider, new type connector | 19.2 pump | Higher flow, lower resistance, and better appearance |
| Sliding carrier | Thicker and stronger sliding carrier, lower friction platen | Channel steel sliding carrier | Higher rigidity and lower friction |
| Oil pump | 32 | 28.2 | Bigger air flow |
| Rotation speed | 90r/min (diesel engine 1700r/min) 120r/min (diesel engine 2200r/min) | 55r/min | 50% higher rotation speed |
| Feeding speed | 580mm/s | 530mm/s | 10% higher |
Specifications
| Rock hardness | F=6-20 |
| Hole diameter | Ф80-125mm |
| Economical drill depth | 25m |
| Rotating speed | 0-120r/min |
| Rotation torque | 2000N.m |
| Pressure | 1.0-2.4Mpa |
| Air consumption | 9-18m³/min |
| Lifting capacity | 17000N |
| Propulsion type | Hydro-cylinder-chain |
| Propulsion length | 3000mm |
| Drill rod size | Φ76mm |
| Gradeability | 30° |
| Ground clearance | 320mm |
| Walking speed | 0-2.0km/h |
| Carriage rising angle | Down 135°, up 5°, total 140° |
| Carriage swing angle | Left 100°, right 45°, total 145° |
| Drill arm pitch angle | Down 50°, up 25°, total 75° |
| Drill arm swing angle | Left 44°, right 90°, total 134° |
| Carriage compensation | 1200mm |
| Diesel engine | YC-4D80 (58KW, 2400r/min) |
| Overall dimension (L×W×H) | 5355×2215×2365mm |
| Total weight | 6000kg |
Recommend spare parts for KG930A high pressure crawler drilling rig
| Drill bit diameter | 90mm |
| Drill rod (Diameter×L) | Φ76×3000mm |
| Drill hammer | HD45A |
