|
[China]
Trade Verify
Address: Rm 1503, A Bldg, Southen International Plaza,Yitian Rd,Futian Dist,Shenzhen,518017,China.
Contact name:John
JINPAT Electronics Co., Ltd |
|
Verified Suppliers
|
|
|
2A Per Wire Slip Ring of 24 Circuits with 100rpm Working Speed and Low Friction
Quick detail
| Type | Through bore slip ring |
| Feature | solid bore |
| Number of circuits | 24 |
| Current rating | 2A per wire |
| Working speed | 100rpm max. |
| Contact material | Graphite |
Description
A slip ring is a rotary coupling used to transfer electric current
from a stationary unit to a rotating unit. This is accomplished by
either:
Slip rings enable the transfer of electric power or signal circuits across a rotating surface, such as those found in radar antennae, gun turrets, periscopes, electro-optic sensor gimbals and space satellites. The sliding contact is established by a brush that presses against a metal ring. The “brush” can look like a brush made from metal fibers, but more often it looks like a single wire or a spring with a pad of material affixed to the end that contacts the ring. Figure 1 below shows a brush block for a four-pass slip ring. Each ring on this design has two brushes.
Dimension
Product Display
Application Picture
