|
[China]
Trade Verify
Address: No.69 Xijiu Road, Industrial Park for Environmental SCI & TECH, Yixing, Jiangsu,China
Contact name:Iris Xu
B-Tohin Machine (Jiangsu) Co., Ltd. |
|
Verified Suppliers
|
|
|
DN250 BKW9020S Roots Blower Water Cooling
BKW9020S Roots Blower inherits most components from BK9020, it
adopts water cooling in bearing cover, which can reduce the
temperature of bearing when working and prolong the longevity, it's
bore size is DN250, which can generate larger capacity suitable for
cement factory and power plant use.
Tri-lobe technology means blowers have lobe tips exposed to 120
degrees around the rotor instead of 180 degrees as in a bi-lobe
blower. This provides a stiffer rotor set, meaning less deflection
at any load.
1. Helical type timing gears for smooth operation
2. Compact, flexibility in installation gives users more choices.
3. Integral structure of impeller and shaft for more stable and
smooth operation
4. Adopt imported oil seals made from fluoric rubber with great
wear resistance and high-temperature resistance.
5. Low noise, low vibration and energy consumption.
Specifications:
| Discharge differential pressure | 60-100KPA |
| Air capacity | 40.72m3/Min-73.32m3/Min |
| Rotary speed | 1000rpm-1500rpm |
| Motor type | 75KW-160KW 380/400/415/440V, 3PHASES, 50/60HZ |
| Motor brand | Standard: Siemens Beide or Wannan motor Siemens and ABB motor for your option |
| Installation type | Standard: horizontal type. Vertical type available for your option |
| N.W. of blower without motor | 1310 kg |
| Packing size Approx. | 2.62*1.78*2.60m (length*width*height) |
Parameters
| Model | Port Dia (MM) | Speed | Inlet airflow (m3/min)and shaft power(KW)(m3/min) | |||||||||||
| 0.6kgf/cm2 | 0.7kgf/cm2 | 0.8kgf/cm2 | 0.9kgf/cm2 | 1.0kgf/cm2 | Cooling Water | |||||||||
| 6000mmH2O | 7000mmH2O | 8000mmH2O | 9000mmH2O | 10000mmH2O | ||||||||||
| 0.06Mpa | 0.07Mpa | 0.08Mpa | 0.09Mpa | 0.1Mpa | ||||||||||
| rpm | m3/min | KW | m3/min | KW | m3/min | KW | m3/min | KW | m3/min | KW | L/min | |||
| BKW9020S | 200 (8") | 1000 | 44.70 | 59.00 | 43.60 | 65.83 | 42.58 | 72.66 | 41.62 | 79.49 | 40.72 | 86.33 | 15 | |
| 1050 | 47.61 | 61.95 | 46.52 | 69.12 | 45.50 | 76.29 | 44.54 | 83.47 | 43.64 | 90.64 | ||||
| 1150 | 53.50 | 66.49 | 52.57 | 74.19 | 51.71 | 81.89 | 50.90 | 89.59 | 50.13 | 97.29 | ||||
| 1250 | 59.17 | 72.27 | 58.24 | 80.64 | 57.37 | 89.01 | 56.56 | 97.38 | 55.79 | 105.75 | ||||
| 1400 | 67.66 | 80.94 | 66.73 | 90.32 | 65.86 | 99.69 | 65.05 | 109.07 | 64.28 | 118.44 | ||||
| 1500 | 73.32 | 86.72 | 72.39 | 96.77 | 71.52 | 106.81 | 70.71 | 116.86 | 69.94 | 126.90 | ||||
| 1600 | 78.98 | 92.51 | 78.05 | 103.22 | 77.19 | 113.93 | 76.37 | 124.65 | 75.60 | 135.36 | ||||
Description of blower parts:
| Casing | Made of Casting iron HT200 ENDLESS structure adopted for improving efficiency, one-time machined by CNC center with high precision |
| Rotor (Shaft and impeller) | Made of Casting iron QT500 The impeller and shaft is cast as an integral part. Adopting NC planer for machining to achieve high precision |
| Gear end bearing | Made of GCr15 NSK brand, double-row angular contact ball bearing, capable of supporting axial load |
| Drive end bearing | Made of GCr15 NSK brand, cylindrical roller bearing |
| Gear | Made of 20CrMnTi Bevel structure for more smoothly running |
| Oil seal | Made of fluoro rubber bears high temperature and has a longer life. |
Working Principle
Roots blower is a cubage blower, and it discharges a fixed amount
of air in proportion to its rotation speed. Every rotation, there
is two lobes to finish three times absorbing and dischargeing air.
Compared with two lobes blower, it is of less air pulses, smaller
load change, higher strength, lower noise and vibration.
Two paraller shafts have three lobes each, all the lobes keep small
clearance with each other and housing inside. Every lobes
rotatiomn, a certain air will be absorbed at inlet and transfeered
form the housing inside surface to blower's diacharge port.
Two shafts will be turned by the timing gears, no any touching
between lobes, so it can be turned at high speed without any
lubrication inside. It has the following chaaracteristics: simply
configuration; running smoothly;good performance stabilization. It
has been widely applied in various industries.
Cooling Water:
Clean water without foreign materials is required.
Water temperature shall be less than 40 ℃.
