Cangzhou Famous International Trading Co., Ltd |
Verified Suppliers
|
|
Circular Arc Steel Tile Roof Tile Roll Forming Machine
With more than 10 years work experience, our Circular Arc Steel
Tile Roof Tile Roll Forming Machine has been exported to many
countries.
Due to its durability, convenient operation, stable operation, good
material, high hardness, and long operating life, the tile press is
highly praised by a wide range of users.
No. | Item | Description |
1 | Coil | Galvalume, Galvanized, PPGI, Aluminum |
2 | Raw Material Thickness | 0.3-0.8mm |
3 | Working Speed | 10-15m/min ( not including the cutting time) |
4 | Roller Station | 16 Raws |
5 | Dimension (L*W*H) | 7500 mm*1500 mm*1500 mm |
6 | Machine Weight | 5500 KG |
7 | Electrical Control System | Panasonic PLC (can be customized) |
8 | Drive Motor Power | 5 KW |
9 | Hydraulic Station Power | 5 KW |
10 | Power Supply | 380V/60HZ/3 PH |
11 | Cutting Accuracy | ±2 mm |
12 | Driving Mode | Single Chain 1 inch |
13 | Material of Shaft | 70 mm 45#steel forged |
14 | Material of Roller | 45# Steel Finish Machining, Plated Hard |
Application
Arc steel plates are mainly used for roofs, walls, doors, large-span factories, warehouses, office buildings, villas, roof additions, air purification rooms, cold storage, shops, kiosks and temporary houses in industrial and commercial buildings.
Advantage
(1) Manual uncoiler
It is used to support the steel coil and realize the uncoiling by
means of rotatory movement. The steel coil is uncoiled manually.
The capacity of this uncoiler is 5 Ton.
(2) Feeding table
Receiving the raw material (steel sheet), it guarantees parallel
and everything is uniformity.
(3) Machine material
welded steel frame structure of our machine, AC frequency
conversion motor reducer drive, chain transmission, heat treatment
works together In order to get high quality product
(4) Shearing system
It adopts hydraulic station and automatic cut to length system to
realize the stably cutting of certain length of products.
(5) Hydraulic system
The system includes a set of hydraulic tank, a set of a Gear Pump,
two hydraulic pipes .and two sets of Solenoid Valves works together
to make sure the cuting is stability.