|
[China]
Trade Verify
Address: ROOM 703, Yihe Building, Cangzhou City, Hebei province,China
Contact name:Ryan
Cangzhou Famous International Trading Co., Ltd |
|
Verified Suppliers
|
|
|
1220/1250mm 2 Sizes In 1 Floor Deck Roll Forming Machine With 1.5mm
Thickness
1. Our Deck Roll Forming Machine advantage
a. one machine can produce 2 or 3 different width
b. big motor 15kwx2
c heavy duty 1.5mm thinckness
2. Equipment Detailed Parameters:
No | ||
| Suitable Material | GI | |
2 | Width of the raw material | 1220/1250mm |
| 3 | Rows of rollers | 28 rows |
| 4 | Appearance size | 13000*1500*1200mm |
| 5 | Total power | Main motor 15kwx2 |
| 6 | Thickness of raw material | 0.8-1.5mm |
| 7 | Speed | 8-15m/min |
| 8 | Diameter of shaft | ￠90mm |
| Voltage | 380V 50Hz 3phases | |
| 10 | Big frame | 350H steel |
| 11 | Middle plate | 18mm |
4. Components and Technical Specification
A. Manual Uncoiler
It is used to support the steel coil and realize the uncoiling by
means of rotatory movement. The steel coil is uncoiled manually.
The capacity of this uncoiler is 8 Ton, and it is capable for most
of the cases. This equipment is suitable to process the steel coils
with 508mm of ID.
B. Feeding Table
Put the raw material(steel plate) through the beach to manufacture
and process, it can guarantee that the products are neat, parallel
and everything is uniformity. Please refer to the equipment
regulation to know the function of locate angle iron.
C. Main Roll Forming Machine
Material of rollers:45# steel,roller surfaces polishing, hard
plating , The polished surface and the heat treatment towards the
molds also can keep the molding plate surface smooth and not easy
to be marked when it is being stamped.
D. Hydraulic System
Power:4kw,Hydraulic oil: 40#
hydraulic oil into the hydraulic oil tank ,the pump drive the
cutter machine to begin the cutting job.
E. Computer Control Cabinet
The target piece`s length is adjustable and digit of it can be
adjusted. Computed mode has two modes: automatic and manual one.
The system is easy to operate and use
PLC:Delta
F. Shearing Mechanism
It adopts the hydraulic drive and automatic location to decide the
dimension and cut the target products.Material of blades:
Cr12,quenching treatment.
G. Output Table
It adopts welded & screw steel and supported roller to transmit
the products,which is used to collect the finished products.
H. Machine loading
All machines need one 40ft container to hold.
