Metal Sheet 0.3 - 1.0 * 1250mm Steel Slitting Machine Line With Re-Coiler

Metal Sheet 0.3 - 1.0 * 1250mm Steel Slitting Machine Line with Re-coiler, Economic design

Quick Detail:

1. Thickness : 0.4-1.0mm
2. Material : GI, PPGI, or Stainless steel, Aluminum
3. Slitting strips: 5-10 strips/time
4. Line speed : 15meter/min
5. Material weight : 5-10Mt normally
6. Coil inner diameter : 508mm
7. Cutting tolerance : ±1mm

Application:

Metal sheets or strips suppliers always need slitting and cut to length machine line for the production of metal sheets with different widths or lengths from GI, PPGI, or Stainless coils in large quantities.

GI, PPGI or Stainless coils are always brought to make wide metal sheets, like roll formed roofing or wall panels, while there are many occasions narrow steel strips are necessary, for example, the production of stud and tracks, roof battens or angle steel bars is always made from narrow steel strips.

The slitting line is equiped with re-coiler, then after slit, the recoiler can slit baby coils to make roof batten, ceiling, gutter, fascia panel machine.

Machine list:

1. 5Tons hydraulic De-coiler
2. Simple pre-leveling device
3. Slitting device
4. Guillotine device
5. Siemens PLC and IOP/ touch screen, Schneider brand inverter

Description/Technical Parameter details of complete line:

• 5TX1250mm Hydraulic Un-Coiler with coil car
• Simple pre-leveling device
• Slitting and Recoiler details as below table :

• PLC Control System

Siemens brand PLC and touch screen,

Schneider/ Shihlin/ Delta brand Inverter, Omron encoder

Cut-to-length tolerance≤±1mm

Control Voltage 24V

• Product Rack Un-powered, 3 meter long

Profile Drawing/Layout/Equipment reference pictures: