C37 Light Keel Roll Forming Machine , C Channel Rolling Machine With Embossing In Bottom

C Channel roll forming machine with embossing in bottom, C37 size light keel roll forming machine

Quick Detail:

1. Thickness : 0.4-0.6mm
2. Material : Galvanized steel
3. Material weight: 1.5MT cap.
4. Driven way: by 5.5Kw driven motor
5. Cutting way: by hydraulic power pack, there is waste after cut-off
6. Cutting tolerance : ±1mm

Application:

A drywall stud and track roll forming machine usually consists of manual de-coiler, a feeding guide unit, a punching tool, a roll forming unit, a cutting unit, a transmission unit, a hydraulic unit, a control unit, and run-out tables. Under PLC control system, this drywall stud and track roll forming machine fully automatically produces 4-6 metal c studs or u tracks out of galvanized steel of 0.6-1.2mm thickness from punching, roll forming and cutting.

A stud and track roll forming machine has been designed for the automatic manufacturing of metal c stud or u track continuously for light gauge or lightweight steel building systems.

This C37 panel, NKH machinery sold to South Africa, there is stiffener on flange and dimple on web

Machine list:

1. 1.5MT*300mm manual un-coiler
2. Roll forming machine
3. Hydraulic cutting device
4. Run out table
5. PLC control system

Description/Technical Parameter details of complete line:

• 1.5TX300mm Manual Un-Coiler

Un-powered; Load capacity= MAX.1.5Ton

Coil inner–diameter=410-570mm

Coil Width= MAX.300mm

• Roll forming machine with cutting details as below table :

• PLC Control System

Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder

Cut-to-length tolerance≤±1mm

Control Voltage 24V

• Product Rack 4 meter length rolled type

Profile Drawing/Layout/Equipment reference pictures: