Automatic 0.8 Meter Width Mesh Panel Welding Machine
1. Product description
Automatic 0.8 meter width mesh panel welding machine is used
for making wire mesh. Line wires (also called long wires) are
laid out on a pattern board to set the panel width spacing. Cross
wires are fed into a hopper, and are programmed to be dropped one
at a time onto the line wires. Then, the cross wires are resistance
welded into place setting the panel length spacing. The panel
advances after the weld and the process starts over again.
2. Technical parameter
Model | Mesh width | Wire diameter | Line wire pitch | Cross wire pitch |
L-DHW-XSH | 800-1200mm | 0.5-1.2mm | 1/4", 1/2", 1" | 1/4", 1/2", 1" |
Length | Mesh type | Welding speed | Area needed | Weigth |
Any length | Panel | 60-80 rows/min | 4x12m | About 3000kg |
3. Application area
The automatic 0.8 meter width mesh panel welding machine can
be used in algriculture. The machine produce the wire mesh.
The people can use the wire mesh to make animal cages. Such as:
chicken cage, dog cage, rabbit cage, etc. It is easy operation and
economical.
4. Advantages
a. This machine is compact in structure, easily to operate and
with fully functions. It has lower cost, high efficiency, reliable
working, low energy consumption advantages.
b. PLC controlled. Easy to set and control. It makes this
machine more intelligent and reasonable.
c. The greatest advantage is possible to adjust the distance
of line wires at random on the same mesh panel.
d. The welding wire diameter is able to be made to orders. The
range of our mesh welding machine is from 0.3mm to 12mm. Material
can be stainless steel wire, galvanized wire, plain steel bar, cold
rolled rebar, hot rolled rebar.
e. Using our patented cross wire fallen device, the device is
compact, rational layout, reliable work.