Galvanized Wire Diameter Reinforcing 6mm CNC Spot Welding Machine
1. Product description
Galvanized wire diameter reinforcing 6mm CNC spot
welding machine is used for making panel mesh. The CRL
cold-rolling lines are designed to produce smooth or ribbed
cold-rolled steel wire for reinforcement or industrial
applications. The final product obtained through
semi-automatic horizontal or fully automatic vertical spoolers is
wire in spools or in compact coil format with diameters that range
from 4 mm to 16 mm, while the weight of the coils ranges from 2.5
tons to a maximum of 5 tons.
2. Technical parameter
Model | HY-DHW-1500 | HY-DHW-2000 | HY-DHW-2500 | HY-DHW-2800 | HY-DHW-3300 |
Weld width(mm) | 1500 | 2000 | 2500 | 2800 | 3300 |
Meshi trip(mm) | Single trip 3000 and no limit on return |
Std trans.spacing | >=25mm-stepless adjustable |
Std long.spacing | >=50mm, and progressive increase by 50 | >=100mm, and increase by 100 |
Std weld spots | 31 | 41 | 51 | 27 | 32 |
Wire diameter(mm) | 3.0-6.0 | 3.0-6.0 | 3.0-6.0 | 5.0-12.0 | 5.0-12.0 |
Weld speed(times/min | 50-70 | 40-60 | 40-60 | 40-60 | 40-60 |
Trans material | Straight bar/rod | Straight bar |
Long material | Straight bar/rod |
Control mode | PLC programming servo motor stepper |
Mesh diagonal error | <=2 |
Mesh overall error | <=2 |
Air pressure | >=0.7 |
Weld material | Cold drawn wire, galvanized wire, cold rolled ribbed steel |
3. Application area
The galvanized wire diameter reinforcing 6mm CNC spot welding
machine can be widely used in construction reinforcement,
the ground for the tunnels, bridges, highway, airport and wharf,
also in construction of wall body.
4. Advantages
a. The machine line automatic degree can be according to
request. For the economical type, line wire and cross wire are pre
strainghtened and cut to length. We are capable to produce fully
automatic machine.
b. The weft wire of wire mesh welding machine feeding from the
multi hopper which capacity is more over ten times than the
traditional hopper.
c. We can design the welded wire mesh machine as your
requirement.
d. Welding part can easily switch, which greatly improves the
service life of machinery, maximum reduce the cost.
e. Synchronization control.