High Quality Aluminum Alloy Pu Insulated Spiral High Speed Door
Rapid Hard Material Spiral Door
high speed spiral door is a new brand metal rapid industrial door
with anti-theft,save energy,good sealing,high
efficiency,anti-wind.It is used to logictics channel for Fast and
frequent use,the maximum opening speed of the door is 2.35m/s.those
door is able to save more cost and reduce energy loss for many
enterprises.it can save about 50% energy loss than common sectional
garage door,metal roller shutter door and others door.
Aluminum Spiral High Speed Rolling Door panel Spiral Steel Rolling
Shutter Door features
Practical and durable
The operation of hard fast door equipment is very efficient, and
the whole process flow does not occur. In addition, the probability
of equipment failure in long-term use is very small and more
durable, thereby increasing the utilization of the door.
Reliable collision
The door device has a unique anti-collision design, which ensures
that the door device does not directly collide with other objects
during operation, avoiding damage to the door device or damage to
other objects, and is more worry-free to use.
High speed stability
As the name suggests, the door device has a very fast running
speed. The fast door manufacturer adopts the variable frequency
motor technology, and the running speed can also be adjusted. The
running speed is high and stable, and it is trustworthy!
Energy saving and environmental protectioThe advanced AC variable frequency motor drive technology adopted
by the fast door manufacturer can realize the function of energy
saving and environmental protection while ensuring the operation of
the door equipment, and can reduce the loss of equipment operation
as much as possible.
Strong and sturdy
The quick door manufacturer has optimized the structure of the door
body to ensure the longevity of the equipment and ensure that the
equipment is durable and free from other factors during a long
period of use.
Windproof seal
Fast door manufacturers' products have very good wind resistance,
can provide users with a very good sealing environment, and at the
same time have very good sound insulation, insect proof, dustproof
and other functions.
Easy to maintain
The product has a simple structural design and fewer internal
movable parts. This design can improve the stability of the
equipment, reduce the cycle of parts replacement and maintenance,
and facilitate post-maintenance and maintenance
Motor
Aluminum Spiral High Speed Rolling Door panel Spiral Steel Rolling
Shutter Door with foam insulation can be equipped with servo motor
and three-phase asynchronous motor, and canprovide domestic or
imported motor according to customer requirements.
The advantage of servo motors
1.Accuracy: realizes closed-loop control of position, speed and
torque; overcomes the problem of stepping motor out of step
2.The speed: high-speed performance is good, the general rated
speed can reach 2000 ~ 3000 rpm
3. Adaptability: It has strong anti-overload capability and can
withstand three times the rated torque. It is especially suitable
for occasions with transient load fluctuations and quick start.
4. Stable: It runs smoothly at low speed, and does not produce
stepping operation similar to stepper motor when running at low
speed. Suitable for occasions with high speed response requirement.
5. Timeliness: The dynamics of motor acceleration and deceleration
are short, generally within tens of milliseconds.
6.Comfort: heat and noise are significantly reduced.
Packaging
Polywood box packaging for each completely set will loading full
container or LCL order .
Specification:
Detail Information: | |
Opening Speed | 0.7 ~ 2m/s |
Interior / Exterior Door | Suitable |
Material | Aluminum Slat, Double Layer with PU Foaming Core |
Max Width | 7000mm |
Min/Max H | 1200mm / 7000mm |
Door Curtain Thickness | 40mm Total thickness |
Drive Unit | Electric / IP55 |
Safety Sensor | Electric safety edge |
Safety photovell |
Control voltage 24V DC |
Motor Brand | SEW German |
Servo System China |
Control Brand | Mitsubishi Japan |
Servo China |
|
Command System | Remote control, Radar sensor, Floor sensor, Rope switch, Key cards
etc |
About Us
Established in 2006, HengTaichang Intelligent gate control
technology co., LTD is a leading manufacturer of automatic doors.
We are located in Dongguan as known as " factory of the world" , .
It is very convenient to all over the world by air or sea.
HengTaichang Is a high-tech company that integrates development,
design, production, installation, sales,service and after-sales as
one of the professional manufacturers, Over the years, we have
designed, developed and manufactured a wide range of automatic
doors, such as high speed rolling curtain doors, Industrial sliding
door, Rapid metal shutter door, rapid accumulation of doors, silent
roller shutter door, commerce crystal folding door, Fire Proof
& Blast Proof Door, Hard Rapid Turbo Roller Door, remote
control sectional garage door, remote roller shutter window and so
on.
F A Q :
1,Are you trading company or manufacturer ?
A: We are factory.
2. What's the payment details?
Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T
in advance ,balance before shippment.
3. What's the delivery time?
For common order, about 15 days only.
4. What about the warranty for the doors?
We provide 12 months warranty for all doors and accessories.
5. Do you provide OEM Service?
Yes. OEM & ODM Service is ok for us.
6. What's the MOQ?
We accept 1 set as sample order.
7. How about the package?
Plywood case, suitable for sea freight or air freight, as your
request.