Automatic And Manual Anti-theft Roller Shutter Doors Reinforced
Strong Security Roller Door
The Aluminum roller shutter door is composed of guide
rail,slat,electric motor,lock set and transmission mechanism. It is strong and durable with strong security, long service life,
burglar alarm function and so on.
Its guide rail is made of 3.0mm thick aluminum molding by
extrusion. The inner and outer panels of the slat are made of 1.2 mm thick
aluminum with 4 pieces of 1.0 mm thick reinforced steel bars in the
middle and 2 pieces of steel bars of which diameter is 6 mm in the
middle.The bottom bar is made of aluminum square pipe. Meantime, it has the function of rebounding when it encounters an
obstacle, and can also set up the function of blocking and
rebounding itself. The anti-theft rolling door has the characteristics of beautiful
appearance, strong resistance and theft prevention. Its way of opening could be by manual, remote control and button.It is suitable for places with high security requirements such as
banks and villas.
Features:
1.Chain break protection device;once the transmission chain breaks,
it will immediately prevent the reel from reversing, to stop the
door sliding , and avoid personal or property damage.
2.It can meet the automatic rebound function ,to stop or reverse
automatically when it encounters an obstacle.
3.The door system has the ability of resisting damage as stipulated
by the international security door. When the door is damaged by
professional tools, such as drilling, cutting, sawing, prying and
so on, the door is still firm .
It appearance using electrostatic powder spraying process,
anti-Rain Water, anti-corrosion, service life of more than 20
years.
4.The bottom beam is equipped with automatic interlocking device.
It is designed with movable type, and the automatic locking device
does not need manual interference, thus avoiding the situation of
forgetting the locking and damaging the door when the lock is
opened .
5. Adopt double ground hook lock ,its use automatic lock and double
ground hook lock these two kinds of lock two-stage lock.manpower
can not open , strengthen the anti-theft property.
6.The special motor and control system use national standard 36V DC
motor, slow start and slow stop, up and down speed consistent, not
easy to heat , can run infinitely; Wireless tight wall switch,
intelligent control, The special motor of bank door system has the
characteristics of precise positioning, low noise, small vibration
and low power consumption, and the design service life is obviously
10 times longer than that of the similar products.
Functional design:
1. Lintel available: it can be set with advertising slogans or
billboards. If it's a bank, it can be put with the bank's logo and name.
2. Anti-prying function: installed with anti-pushing device, locks are
set on both sides of the door bottom. When the switch is locked, there is a prompt sound and the lock has
anti-prying function which can prevent the door from prying by
force, and it is safe against theft.
3.Silent Operation:the anti-theft rolling shutter door of the bank is
independently developed by Zhongtai.It ensures that the door can run vertically and smoothly at any
position to eliminate the friction of the door in operation, making
the door run more smoothly and noiseless,which can achieves zero
friction and noiseless operation.
4.Strong and durable:not only the slat itself is strong and
durable,but also the slat is inserted with reinforced steel bar of
6mm diameter to make burglars cut slowly and be found in time. It has long service life, and a burglar alarm device could be
installed.Besides,Zhongtai locks are certified by the Ministry of public
security and the police electronic products quality testing center.
5.High quality motor:its motor of this door is a direct current motor
with good heat dissipation performance. Compared with alternating current motor, the door with DC motor can
run more frequently at the same time without damage.
6.Various options:the door could be opened and closed with a safety
alarm (optional), anti-collision device (optional) and a limiter,
using automatic rolling to support its opening. Anti-collision device has the function of automatic rebound when
encountering obstacles, preventing the collision of the vehicle
when the door falls, and making the person, vehicle or pet pass
through the door body smoothly and safely.
7.Multiple safeguards:it can automatic close with double ground hook
locking to ensure multiple protection.
8.Intelligent control:It has many ways of control such as button,
key, remote control and so on.It is equipped with emergency battery would be provided with DC
power supply to ensure normal opening and closing of the door after
power failure.Even if the standby battery is powered off,it is equipped with
chain to ensure the operation of the door by manually.
9.Operation speed: the average speed of the anti-theft rolling
shutter door is 5.0-5.5m/s when it is switched on and off, and
slows down when it is about to close or rise to the top.
10. Beautiful appearance and design: it is with characteristics of
beautiful and generous, durable and strong anti-theft.
Structural design:
Slide: made of 3.0mm thick aluminum modeling by extrusion.
Size of slide:10 mm thickness* 100 mm width
Slat:1.2mm thick * 90mm width, with four pieces of 1.00mm thick
reinforced steel bar inserted in the middle and two pieces of steel
plate of diameter 6mm.
Bottom bar: made of 20mm thickness *95mm width,profile 2.0mm
thickness aluminum square tube.
| Types of Slat by Width | 45mm,77mm,86mm(Foam roller
shutter).50mm,55mm,80mm,90mm,100mm,120mm,140mm(Extruded roller
shutter) |
| Slat thickness | 0.3-0.7mm for Foam roller shutter. 0.6-1.5mm for extruded roller
shutter |
| Material of Slat | aluminum alloy double layer with foam or aluminum alloy extruded
double layer |
| Color of Slat | white,cream,gray,wood,natural and customized |
| Surface texture | Electrostatic Powder coated |
| Slat Weight | 4.2-11KG/m2 |
| Impact resistance | 10N.M no crack |
| Watertightness | 1 class(water pressure 30 Pa) |
| Motor | Tubular Motor:China Motor |
| Chain Motor: Taiwan motor. |
| Operation | Manual: with lock and Spring |
| Automatic: with motor and hand chain |
Why Choose Us?
Customers satisfaction is our eternal goal. We adhere to the management principles of "quality first, customer
first and credit-based" since the establishment of the company and
always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from
all over the world in order to realize a win-win situation since
the trend of economic globalization has developed with
anirresistible force.
Over the years, our company has been working with the well-known
manufacturers work closely with gated, has introduced the latest
and most sophisticated production equipment of various volumes
gate. The use of superior Quality raw materials and high-quality
components, and adhere to the " excellence, precision production"
product concept, to ensure the production of a variety of beautiful
rolling door products Generous, easy operation, security, security,
durability, quality assurance. We spirit of "honesty, quality first, customer first, service
leader," the case Purpose, passion for the community to provide the
safest customers the best a variety of roll gates, but also provide
comprehensive maintenance service.
F A Q :
1,Are you trading company or manufacturer ?
A: We are factory.
2. What's the payment details?
Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T
in advance ,balance before shippment.
3. What's the delivery time?
For common order, about 15 days only.
4. What about the warranty for the doors?
We provide 12 months warranty for all doors and accessories.
5. Do you provide OEM Service?
Yes. OEM & ODM Service is ok for us.
6. What's the MOQ?
We accept 1 set as sample order.
7. How about the package?
Plywood case, suitable for sea freight or air freight, as your
request.
