Size Quick Change Steel Profile Stud And Track Machine SAMCO Studmaker Style

(SAMCO studmaker style) CU50-150 profile Stud and Track Machine

1. Main features of Stud and Track Roll Forming Machine for CU50-150 profile(SAMCO studmaker style)
 
The advantages of Stud and Track Roll Forming Machine with size-quick- change type are as follows:
1. Produce different purlin sizes without changing rollers or spacers.
2. No need changing cutter for a different size.
3. Easy operation, low maintenance cost
4. Infinite sizing(any size within machine range), help to save material
5. Optional Punch hole at any position of purlin web side and flange side
 
2. Detailed Images of Stud and Track Roll Forming Machine for CU50-150 profile(SAMCO studmaker style)
 
Machine Parts
1) CU stud and track machine punching system
Brand: BMS Original: China
 

 

2) CU stud and track machine rollers
Brand: BMS Original: China
Rollers manufactured from high quality bearing steel GCr15, CNC lathes, Heat Treatment.
with black treatment or Hard-Chrome Coating for options.
With feeding material guide, body frame made from 400# H type steel by welding

 
3) CU stud and track machine post cutter
Brand: BMS Original: China
No need to change cutter for a different size,
made by high-quality mold steel Cr12 with heat treatment
Cutter frame made from high quality 30mm steel plate by welding
Pre-punching & Pre-cutting, stop to punch, stop to cut
hydraulic motor:4KW, Hydraulic pressure range: 0-16Mpa
 

 
4) CU stud and track machine product show
Brand: BMS Original: China

Brand: BMS Original: China
ManualDecoiler: one set
Un-powered, manually control steel coil inner bore shrinkage and stop
Max. feeding width: 500mm, coil ID range 470mm±30mm
Capacity: Max. 3Ton
 

With 3 tons hydraulic decoiler for option

 
6) CU stud and track exit rack
Brand: BMS Original: China
Un-powered, one unit

 
Other details of Stud and Track Roll Forming Machine for CU50-150 profile(SAMCO studmaker style)
 
Suitable for material with thickness 0.8-2.0mm
Shafts manufactured from 45#, Main shaft diameter=φ70mm, precision machined
Motor driving, Gear chain transmission, about 18 rollers to form.
Main motor=7.5KW, Frequency speed control. Forming speed of approx.18m/min
 
PLC Control System (Touch screen brand: Schneider Electric/Taiwan WEINVIEW,
Inverter brand: Finland VOCAN/Taiwan DELTA/ALPHA, Encoder brand: Japan Koyo/OMRON)
 
Just adjust required WEB, HEIGHT and LIP by a hand wheel with the help of
position clock(with digit display for easy operation) on it,
and then input the required production data on the touch screen.
It takes only 5-10 minutes to finish all. No need to change rollers or spacers or cutters
like a traditional old-style machine (which takes over 45 minutes for each production size changing).
 
Combined with: PLC, Inverter, TouchScreen, Encoder, etc
Cut-to-lengthtolerance≤±2 mm
Control Voltage 24V
User's manual in English