Qingdao Knnjoo Machine Inc |
Verified Suppliers
|
|
Wire rod shot blasting machine
The purpose of this machine is to clean coiled wire rods by using the shot blasting process. It effectively removes oxide scale and surface scale layers formed during steel rolling. The shot blasting process achieves a surface derusting grade of Sa2.5 and a surface roughness grade of Ra6.3-12.5μm on the round billet.
Compared to traditional pickling treatment methods, this machine offers several advantages. Firstly, it is more economical and cost-effective. Secondly, it is environmentally friendly, as it does not involve the use of chemicals or generate harmful waste. Lastly, it is highly efficient, with an output capacity of 15-20 t
ons per hour.
The machine features a unique design with a "rotating gate + double cantilever shaft" carrying plate for the round wire material. This design enables a double-station working mode, significantly enhancing the equipment's production capacity. The cantilever shaft, made of special alloy steel, allows the wire to undergo a compound action during the shot blasting process, including "up and down + left and right swing + positive and negative rotation." This compound action ensures thorough cleaning of the wire.
The shot blasting devices are strategically arranged to ensure effective impact on both the inner and outer surfaces of the coiled wire. The entire machine is intelligently controlled by a programmable logic controller (PLC), offering convenient and reliable operation.
Device model: HSPY-II
Equipment name: Double-station round shot blasting machine (arm
length 4000mm-5500mm)
1. Main technical indicators
Disc specifications:
A. Wire diameter: Φ4~Φ36mm
B. Inner diameter of disc circle: Φ800-1100mm
C. Outer diameter of disc circle: Φ1200-1400mm
D. Disc height: 2500mm
E. Maximum load: 3000kg (wire diameter φ4~φ36mm).
l Bearing mode and productivity:
A. Conveying method: cantilever bearing load (when shot blasting,
the indoor cantilever shaft can work according to the PLC program:
clockwise rotation, then counterclockwise rotation; the rotation
time is adjustable. The outdoor cantilever shaft is controlled by
manual buttons, and the operator uses electrical Console
adjustment)
B. Productivity: 6-13 min/rod
C. Effective length: 4000mm-5500
D. Rotation speed: 10-20r/min (frequency conversion speed
regulation)
3. Surface quality requirements after treatment:
A. No iron oxide scale remains on the surface of the steel after
shot blasting
B. Surface cleanliness: Sa2.5 level
C. Surface roughness: Ra6.3~12.5
4. Environmental requirements:
A. Outdoor emission concentration: ≤20-60.0 mg/m3
The purpose of the machine
This machine uses four beams of projectiles thrown by a shot
blasting machine manufactured by foreign advanced technology to hit
the fast-moving wire surface to remove the rust layer and oxide
scale on it to obtain a clean metal surface. It is used in the
metal product manufacturing industry. The machine benefits are as
follows:
1. Remove the rust and oxide layer on the wire surface.
2. The surface layer of the wire rod after shot blasting shows
uniform roughness, which is beneficial to increase the adhesion of
aluminum and copper packages, and the cladding is uniform and never
falls off.
3. Eliminate the internal stress generated during the wire drawing
process of the bar.
4. Increase the tensile strength and stress corrosion cracking
resistance of the wire surface to obtain a permanent service life.
This machine is the best suitable model for the treatment of wire
surface oxide scale in the manufacturing industry.
Features of the machine
1. The equipment has high efficiency, and the cleaned wire surface
is clean and metallic.
2. The shot blasting machine adopts special shaped blades to focus
on the shot, with high density of shots, which improves
productivity.
3. The spacing between the wires by the guide can control the swing
of the cleaned wires to achieve the purpose of cleaning.
4. A number of domestic and foreign advanced technologies are used
to improve the technical content of functional components, so that
the machine has a low failure rate and a high start-up rate. The
sealing effect is good, and it reaches the environmental
purification index required by environmental protection.
working principle
The front power (provided by the user) on the wire to be cleaned
passes through the shot blasting chamber through the pressure
wheel, and the high-speed shots are shot by two upper and lower
shot blasting machines arranged inside the shot blasting chamber,
and two left and right shot blasting machines arranged on both
sides. Strike the surface of the passing wire to remove the oxide
scale and rust layer on its peripheral surface. After cleaning, the
pellets are sent to the lower part of the elevator by the screw
conveyor, and the pellets are sent into the separator by the
elevator, and the qualified pellets are fed into the hopper through
the airflow for recycling. The unseparated mixture of pellets is
returned to the shot blasting The chamber continues to circulate.
After the fine rust and dust are purified by the sedimentation
cylinder and the dust collector, the large particles are captured
and collected, and the pure gas is discharged into the atmosphere.
Advantage | |
1.Wide application,easy to install and use. | |
2.Customized.Meet your needs. | |
3.Good stability.Low failure rate(technical maturity,technical precipitation,skill workers) | |
4.Exquisite appearance(mature craft) | |
5.Large factories.Prompt delivery. | |
6.Strict quality inspection department. | |
7.Factory direct selling with competitive price. | |
8.Over 10 years' production experience. | |
9.Professional design team to serve you. | |
10.Main electrical control sysytem adopts international brand. | |
11.CE certificate assure you our quality. |