Forging Parts Cleaning Spinner Hanger Shot Blasting Machine 1200*1600 mm

Forging Parts Cleaning Spinner Hanger Shot Blasting Machine 1200*1600 Casting

Double Hanger Hook Type Sand Blasting Machine

The hook shot blasting machine is the standard model of the shot blasting machine. The diameter of the working cylinder is from 900 to 1300 mm, and the height is from 1300 to 3500 mm. The standard model has 2-7 blasting heads and the maximum load capacity is 10,000. Kg, the production efficiency of this shot blasting machine is quite high, the flexibility span is also quite large, it is an ideal cleaning and strengthening equipment, and it is easy to operate, just load the workpiece to be processed on the machine, press the start button, and go through a very In a short time (usually 5-7 minutes), the entire cleaning process is completed and all dust and residual shots are removed. It is mainly suitable for the surface treatment of various medium and large castings, forgings, weldments, and heat-treated parts, including Fragile and irregularly shaped workpieces. It is suitable for surface cleaning or strengthening of castings and forgings and riveting and welding parts of many varieties, medium and small batches, especially for the surface cleaning or strengthening of thin and thin-walled parts. It can apply strong shot blasting to the surface of the steel in its original state to remove the surface rust spots, welding slag and oxide scale to obtain a certain smooth and uniform metallic luster surface to remove stress and improve the surface coating quality and corrosion resistance of the steel. performance.

Technical data

Application

This type of cleaning machine is suitable for surface cleaning or strengthening treatment of small and medium-sized castings and forgings in the casting, construction, chemical, electrical, machine tool and other industries. It is especially suitable for surface cleaning and shot blasting of castings, forgings and steel structural parts of many varieties and small batches to remove a small amount of sand, sand core and oxide scale on the surface of the workpiece; it is also suitable for surface cleaning and strengthening of heat-treated parts ; Especially suitable for the cleaning of slender and thin-walled parts that are not suitable for collision.

Working principle

When the machine is working, when the preparation work (dust removal system, hoist, screw conveyor, etc.) is completed, the machine starts to work normally. First, the hook descends to lift the workpiece, rises to a certain position, and then enters the shot blasting room along the track, and stops and starts to rotate when it reaches the predetermined position. At this time, close the gate of the shot blasting room, open the shot blasting device, and open the blasting gate, Start shot blasting the workpiece. Repeat this process until the work is completed, and shut down in order.

Our company

Qingdao KNNJOO machine Inc. is the subsidiary corporation of joint venture set up by Qingdao foundry machine CO.,LTD. and taiwan APC company, the company is mainly manufacture advanced shot blasting machine, shot blasting equipment and foundry machine. The company introduct and develop more than one hundred kinds of shot blasting machine and shot peening machine, more than 20 products filling a domestic gap in this field, the products applied to many well-known enterprises such as Thyssen Krupp, SIEMENS, FAW-Volkswagen, Cummins engine, Dongfeng Automobile,Weichai Power, Jinan heavy duty truck, China high-speed rail, Bombardier, Chery Automobile, Mercedes-Zenz, Hitachi nuclear industry, Fuji Heavy Industries, Tangshan gear, AISIN, ALSTOM, Doosan, Caterpillar and etc. And the products are exported to 49 countries around the world such as Spain, France, United States, South Korea, Japan, Singapore, Australia, Russia and etc. The company enjoy a high reputation and reputation in the world.