Large Spinner 1500*1900mm Shot Blasting Equipment Surface Cleaning

HSK Series Double hook hanger shot blasting machine large spinner shot blasting equipment
 
Double Hanger Hook Type Sand Blasting Machine
This equipment is mainly used for shot blasting of structural parts, deburring and homogenization of die castings or hardening of dynamic stress parts. The hook type shot blasting machine is divided into single hook and double hook. The hook type shot blasting machine uses two hooks to load workpieces into the shot blasting room alternately. Use a shot blaster to throw 0.1~1.5mm projectiles to the surface of the workpiece to make the surface of the workpiece reach a certain roughness, make the workpiece beautiful, or change the compressive stress of the workpiece to increase the life. This model is widely used in the surface cleaning or strengthening treatment of medium and small castings and forgings in the industries of gears, gear shafts, forging, casting, construction, chemicals, motors, machine tools, etc., such as descaling, burrs, sand castings, etc. . And this model is suitable for cleaning slender and thin-walled parts that are not suitable for collision. The hook type shot blasting machine is the standard model of the shot blasting machine. The rotating diameter of the shot blasting chamber is from 1000 to 3000 mm, and the height is from 1200 to 3000 mm. The standard model has 2-7 blasting heads and the load capacity is up to 10,000 kg. The production efficiency of this shot blasting machine is quite high, and the flexibility span is quite large. It is an ideal cleaning and strengthening equipment, and it is easy to operate. Just load the workpiece to be processed on the machine, press the start button, and go through a very In a short time (usually 5-7 minutes), the entire cleaning process is completed and all dust and residual shots are removed. It is mainly suitable for the surface treatment of various medium and large castings, forgings, weldments, and heat-treated parts, including Fragile and irregularly shaped workpieces.

 
Technical data

Application

This type of cleaning machine is suitable for surface cleaning or strengthening treatment of small and medium-sized castings and forgings in the casting, construction, chemical, electrical, machine tool and other industries. It is especially suitable for surface cleaning and shot blasting of castings, forgings and steel structural parts of many varieties and small batches to remove a small amount of sand, sand core and oxide scale on the surface of the workpiece; it is also suitable for surface cleaning and strengthening of heat-treated parts ; Especially suitable for the cleaning of slender and thin-walled parts that are not suitable for collision.
 
Operating procedures
The following is the operating procedure of the hook shot blasting machine, and the operator must be familiar with it to avoid failures and accidents of the shot blasting machine. 　　
1. The dust removal system is on; 　　
2, the hook is installed outdoors; 　　
3. The hook is moved into the room and the operation stops; 　　
4. The door is closed and the hook starts to rotate; 　　
5, the hoist is on; 　　
6, the shot blasting device is on; 　　
7. The gate of the pill supply system opens and the cleaning begins; 　　
8. After cleaning up, the shot blasting machine stops and the gate of the shot supply system is closed; 　　
9, the hook rotation stops; 　　
10, the hoist stops (if it continues to clean, it may not stop); 　　
11. The door is opened, and the hook is opened for outdoor unloading; 　　
12. The dust removal system stops (if cleaning continues, it can be kept).
 
 
Our company
Qingdao KNNJOO machine Inc. is the subsidiary corporation of joint venture set up by Qingdao foundry machine CO.,LTD. and taiwan APC company, the company is mainly manufacture advanced shot blasting machine, shot blasting equipment and foundry machine. The company introduct and develop more than one hundred kinds of shot blasting machine and shot peening machine, more than 20 products filling a domestic gap in this field, the products applied to many well-known enterprises such as Thyssen Krupp, SIEMENS, FAW-Volkswagen, Cummins engine, Dongfeng Automobile and so on.

The company get the international ISO9001 certificate, Germany TUV certificate, EU CE certificate, France BV certificate at the earliest in the domestic casting machine industry. and the company was the first to make the right of the import and export, the company introduce and optimize the technology of Germany AGTOS, United States PANBORN, England SPENCER,WHEELABRATOR,DISA, it improve product performance, replace outdated technology, and get the affirmation of the new and old users of domestic and foreign around the world.