Home Companies Qingdao Knnjoo Machine Inc

PLC Control Tumblast Sand Blasting Booth Blast Cleaning Machine

Contact Us

[China]

Trade Verify

Address: JIAONAN HAIBIN INDUSTRIAL PARK, HUANGDAO, QINGDAO, CHINA

Contact name:Amber

Qingdao Knnjoo Machine Inc

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

PLC Control Tumblast Sand Blasting Booth Blast Cleaning Machine

Country/Region	china
City & Province	qingdao shandong

Product Details

15Gn China leading tumblast sand blasting booth/blsat cleaning machine

Steel belt shot blasting machine workshop site

Features:

The crawler shot blasting machine is a high-strength wear-resistant rubber crawler or manganese steel crawler for loading workpieces. It uses a high-speed rotating impeller to throw projectiles onto the workpiece in the chamber to achieve the purpose of cleaning. It is suitable for sand removal, rust removal, scale removal and surface strengthening of small castings, forgings, stamping parts, gears, springs, etc. It is especially suitable for cleaning and strengthening parts that are not afraid of collisions. This machine integrates domestic and foreign technology, is a kind of cleaning equipment with good cleaning effect, compact structure, low noise, and is used for surface derusting or shot blasting in large and medium batch production. It has the following characteristics: 1. It adopts cantilever centrifugal shot blasting machine, which has the characteristics of long service life and simple structure; 2. Three ejection speeds of 75 m/s, 80 m/s and 85 m/s are used. 3. The pulley adopts the internationally advanced quick-change structure, which is beneficial to improve production efficiency and reduce labor intensity. 4. The BE type separator is adopted, which has good separation effect and high productivity, and has a positive effect on improving the life of the blade; 5. Adopt bag filter, the dust emission concentration is lower than the national standard, which improves the working environment of workers; 6. This model adds some special mechanisms such as manual pill gate and discharge gate. 7. The crawler shot blasting machine of this model can be used as a stand-alone machine or by wiring.

1.Compact,fully assembled tumble belt automatic shot blasting machine:

This equipment is mainly used for shot blasting of structural parts and casting

parts,and the handening of dynammically stresses parts.

2.Material and technology:Long working life of wearing parts:

The wear-resistant parts of this blast wheel are precision-casted with

Cr27% high-chromium molten film, and their service life is more than

3 times that of moist film sand castings.

3.Shot blasting room was welded by durable steel frame and steel plate.

In order to prevent the abrasive directly hit the blasting chamber: The main

blasting area of shot blasting chamber lining with imported Swedish high

wear-resistant protective plate, which has a long service life.

4.The blast wheel is a key component in various shot blasting equipment,

and is widely used in the surface cleaning and pretreatment of castings,forgings,

welding parts,heat treatment parts,and surface strengthening processes of gears,

springs and other mechanical parts.

15Gn series steel belt shot blasting machine is used to remove the sticky sand, rust layer

and scale, burr on thesurface of castings, forgings and other workpieces that are easy to

roll and fall, non-brittle parts that are not easy to be crushed, and the surface of the casting

is not deep. Due to its good protection measures, strong shot blasting performance, and

reasonable circulation system structure, it can also achieve satisfactory results for difficult

-to-clean workpieces.

This shot blasting machine has a very high production efficiency and a wide range of flexibility.
It is an ideal cleaning and strengthening equipment and is easy to operate.

Just like this(workshop site):

This design has the advantages of compact structure, convenient maintenance, low noise,
low consumption, high efficiency.
Delivery and payment method:
We support different shipping methods and paymant methods,
including FOB,EXW,CIF,etc.
The payment term is 30% deposit by T/T,the balance paid before delivery.

MOQ	1 SET
Settlement Currency	USD,RMB,EUR
Trade mode	FOB,CIF,EXW
Payment term	30% deposit by T/T,the balance paid before delivery
Delivery time	Within 20-60 days according to different type equipment.

Advantage

1.Wide application,easy to install and use.

2.Customized.Meet your needs.

3.Good stability.Low failure rate(technical maturity,technical precipitation,skill workers)

4.Exquisite appearance(mature craft)

5.Large factories.Prompt delivery.

6.Strict quality inspection department.

7.Factory direct selling with competitive price.

8.Over 10 years' production experience.

9.Professional design team to serve you.

10.Main electrical control sysytem adopts international brand.

11.CE certificate assure you our quality.

Advanced technological innovation

In the aspect of the core part of the machine - blast wheel, our company has

invested millions yuan to proceed the technological innovation, production

research and development.

Push the techniques of optimizations and upgrade

Our company try to push the techniques of optimizations and upgrade of the

whole casting machine industry, continue to inject new elements in brand planning

and product introduction,

Upholding the quality first

The area which our company involved is including the shot blasting machine,

core shooter, sand mixer, environmental protection equipment, fan, wear-resistant

material and steel shot,etc

This machine is mainly composed of cleaning room, blast wheel, pneumatic lifting door,

Pneumatically controlled abrasive gate valve, Pneumatic control system, automatic

loading and unloading system, elevator, screw conveyor,separation system,electrical

system and other parts.

We use Swedish imports (HARDOX HD600) for the material of the shot blasting room

guard and the door guard.The wear resistance is good, which saves a lot of maintenance

costs and man-hours, and achieve maximizes benefits.

Steel belt is connected by track shoe, and the material is wear-resistant high manganese

steel. The two ends of the track shoe are bolted to a chain link. The chain link is made of

carburized and hardened surface of 20CrMnMo alloy steel, and the chain link is connected

by steel pins. The driving device (3kw motor direct connection type) forces the steel belt

to run by chain drive. The two ends of the track cavity are equipped with end plates made

of steel plates, and wear plates are installed inside the end plates. Bearing housings

mountedoutside the chamber wall should be sealed and filled with grease to support the

end discs. The end plate can be adjusted in various directions.Reinforcement ribs are

fixed on both sides of the room to prevent deformation of the room.

After years of research and development and technical cooperation with German

companies, the company has manufactured a high-power direct-connected curve type

7.5-75Kw high-efficiency blast wheel, breaking the monopoly of high-power direct-connected

blast wheel technology in Europe and America. The blast wheel is a key component in

various shot blasting equipment, and is widely used in the surface cleaning and pretreatment

of castings, forgings, welding parts, heat treatment parts, and surface strengthening

processes of gears, spring sand other mechanical parts. This blast wheel technology is one

of the important advances in the development history of China's blast wheel.

The blast wheel also has the following characteristics:

After adding a specified number of workpieces in the shot blasting chamber, the pneumatic

door is automatically closed, the machine is started, the workpiece is driven by the drum,

and it starts to flip.At the same time, the abrasives thrown out by the blast wheel form a

fan-shaped beam, which evenly strikes the workpiece surface.The thrown abrasives and

grit flow from the small holes on the steel belt into the screw conveyor at the bottom,

and are conveyed into the elevator, which is transported by the elevator to the separator

for separation. Dust-containing gas is sucked into the dust collector by the fan for filtering,

and then becomes clean air, which is discharged into the atmosphere. The dust is blown

back into the dust collection box at the bottom of the dust collector by air, and the user can

remove it regularly. Waste sand flows out of the waste pipe and can be reused.The shot

and sand mixture is recovered into the chamber through a recovery tube, and reused after

the separator is separated;the clean abrasive enters the blast wheel through the abrasive

gate and throws the workpiece.

This machine is composed of shot blasting room, blast wheel assembly, abrasive recycling

system, automatic loading system, steel belt system, dust removal system and electrical

control part.

This machine is a small cleaning equipment, which is mainly composed of cleaning room, shot blasting assembly, elevator, separator, electrical system and other parts. See Figure 1 (Table 1 indicates the name corresponding to the serial number of each part) Working principle: Add a specified number of workpieces in the cleaning room. After the machine is started, the projectiles thrown by the shot blaster at high speed will form a stream of shots, which will evenly strike the surface of the workpiece to achieve the purpose of cleaning and strengthening. The thrown projectiles and sand particles flow into the elevator and are lifted by the elevator to the separator for separation. The dust is sucked by the fan and sent to the dust collector to be filtered. The clean air is discharged into the atmosphere. The dust on the cloth bag is mechanically shaken and falls into the dust box at the bottom of the dust collector. The user can clean it regularly. The waste sand flows out from the waste pipe. Can be reused. The shot-sand mixture is retracted into the chamber by the reuse tube, and is reused after the separator is separated. The clean shots enter the shot blasting device through the electromagnetic supply gate to throw the workpiece.

Machine operation: 1. Only if you have a comprehensive understanding of the working principle, performance, operation method, lubrication and other aspects of this machine, you can operate it; 2. Put the projectiles (200kg) into the chamber one after another, then put them into the workpiece, close the feeding door, and prepare to drive; 3. Start the dust collector fan; 4. Start by pressing the buttons in turn: hoist, shot blasting device, and shot supply gate to start cleaning. After the cleaning is completed, turn off the buttons in turn: the pill supply gate, shot blasting device, elevator, dust collector fan, and then start the rapping motor to clean the dust, and the rapping will stop after a certain period of time; 5. After the shot blasting machine is completely stopped, open the feeding door and lift the tooling and workpiece out. 6. In case of emergency, press the emergency stop button and the machine will stop working immediately; 7. After all the work is completed, the dust collector should be turned off in time; 8. In the ventilation and dust removal system, there are two butterfly valves (see the dust removal system diagram). Adjust the two butterfly valves according to the situation to get a good separation effect; 9. Adjustment of the directional sleeve of the shot blaster: The adjustment of the directional sleeve can refer to the schematic diagram shown in Figure 4. 10. The shot blasting machine has three types of ejection speeds. When the ejection speed needs to be changed, it can be completed by changing the belt pulley of the shot blasting machine motor. The replacement steps are as follows: First, turn off the shot blasting device and the main power supply. After the shot blasting device is completely stopped, loosen the motor fastening bolts, remove the V-belt, and then use a hexagonal wrench to loosen the pulley fastening bolts. Use three M12 bolts to tighten the cone The shaft sleeve is separated from the belt pulley, and the belt pulley is removed. Fit the required pulley with the tapered bushing, press it into the motor shaft, and then tighten the three M10 pulley fastening bolts with a hex wrench. Put on the V-belt again, and finally, push the motor to a suitable position with a jack wire, and tighten the bolts to fasten the motor. Note: The outer end surface of the motor pulley should be on the same plane as the outer end surface of the shot blaster pulley. Otherwise, loosen the three M10 pulley fastening bolts for adjustment. The three projecting speeds correspond to the lifting capacity of the two hoists, and the installation and adjustment methods of the hoist motor sprocket are the same as above. The corresponding relationship between the three projecting speeds and the diameter of the pulley and sprocket is as follows:

Ejection velocity 75m/s 80m/s 85m/s

Pulley diameter 131mm 141mm 151mm

Sprocket diameter 179mm/28 teeth 136mm/21 teeth 136mm/21 teeth.