WUXI XINFUTIAN METAL PRODUCTS CO., LTD |
Verified Suppliers
|
301 EN 1.4310 SUS301 1/2H 3/4H FH EH SH Precision Strip Stainless Steel ASTM
Surface finish | Characteristics and application |
NO.2B | The surface brightness and flatness of no2B is better than no2D.
then through a special surface treatment to improve its mechanical properties,No2B could nearly satisfy compreh ensive uses. |
NO.1 | The surface is finished by heat treatment and pickling or processes corresponding thereto after hot rolling. |
NO.4 | Polished with abrasive belt of grit #150-#180,have better
brightness with discontinuous coarse stria,but thinner than No3, are used as bathtub buildings inner and external ornaments electrical appliances kitchen utensils and food processing equipment etc. |
HL | streaks,mainly used as buildingsornaments elevators,door of building,frontal plate etc. |
BA | Cold rolled, bright annealed and skin-passed, the product have excellent brightness and good reflexivity like mirror,kitchen apparatus,ornament etc. |
8K | The product have excellent brightness and prefer reflexivity can to be the mirror. |
Product Name | stainless steel strip |
Material | 201 301 304 304L 310 310S 316L 321 410 420 430 904L 2205 2507 |
Width | 3-200mm |
Thickness | 0.1-3mm |
Length | as customers' request |
Application | Construction projects, machinery manufacturing. container |
Technical expertise
Support and advice are always available from our technical
specialists. If you have any questions
about material selection, processing or our product program, please
contact us.
Tailor-made products
We have a wide range of material grades and sizes – many of which
have been specially developed to
meet particular demands and applications.
Consistent material properties
Products with consistent and reliable quality in every delivery are
the result of full quality assurance
and control throughout the whole manufacturing process.
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
201 | .15 Max | 5.5 - 7.5 | 1.00 Max | .060 Max | .030 Max | 16 - 18 | 3.5 -5.5 | .25 Max | |
301 | 0.15 max | 2.00 max | 1.00 max | 0.045 max | 0.030 max | 16-18 | 6–8 | 0.10 | |
304 | 0.08 | 2.00 max | 0.75 | 0.05 | 0.03 | 18-20 | - | 8-10.5 | 0.10 |
304L | 0.03 | 2.00 max | 0.75 | 0.05 | 0.03 | 18-20 | 6–12 | 0.10 | |
310 | 0.25 | 2.00 max | 1.50 | 0.05 | 0.03 | 24-26 | - | 19-22 | - |
310S | 0.08 | 2.00 max | 1.50 | 0.05 | 0.03 | 24-26 | - | 19-22 | - |
316L | 0.03 | 2.00 max | 0.75 | 0.05 | 0.03 | 16-18 | 2–3 | 10–14 | 0.10 |
321 | 0.08 | 2.00 max | 0.75 | 0.05 | 0.03 | 17–19 | 9–12 | 0.10 | |
410 | .080 -.150 | 1.00 max | 1.00 Max | 0.04 | 0.030 max | 11.5-13.5 | 0.75max |