Combination Needle Roller Bearing Needle Roller And Axial Ball Bearing NX10

Combination Needle Roller Bearing Needle Roller And Axial Ball Bearing NX 10

These bearings consist of a radial needle roller bearing combined with a full complement thrust ball bearing. Together they can accommodate both moderate radial loads and lighter axial loads in one direction. Their low cross-sectional height makes the bearings particularly suitable for applications where other types of locating bearing arrangements occupy too much space. The thrust part is capped with a cover that forms a gap-type seal to retain the grease in the bearings.

• Accommodate radial and axial loads in one direction
• High load carrying capacity
• Low cross section
• Non-separable design

Features:

• combination of a radial needle roller bearing and full complement axial deep groove ball bearing
• suitable for high radial loads and axial loads in one direction
• space-saving due to low radial section height
• separable
• without end cap, for oil lubrication
• condition for the use is a hardened and ground shaft; if the shaft is not usable as raceway, a combination with an inner ring is possible
• with circumferential groove and lubrication holes in the outer ring
• material: chrome steel (100Cr6)
• temperature resistance: from approx. –20 °C up to +120 °C

Combined needle roller / thrust ball bearing (full complement thrust part) with a cover technical datas: