|
[China]
Trade Verify
Address: Room9-616, No. 10 Zhenxing Road (MDW Plaza), Changping District, 102200 Beijing, China
Contact name:Yingkai Zhang
KSQ Technologies (Beijing) Co. Ltd |
|
Verified Suppliers
|
|
|
DTH380 1550mm Low Air Pressure / High Air Pressure DTH Hammers and Bits
In DTH drilling, the rock drilling bit is a continuation of the
shank, which the rock drill piston strikes directly. Since the
piston is in direct contact with the drill bit, little energy is
lost. This gives DTH drilling a nearly constant penetration rate
regardless of hole length.
DTH bits are paired with their corresponding hammers (by drilling
hole diameter and spline configuration). Customers can customize
their DTH bits in various ways, such as changing the tungsten
carbide insert profile (spherical, ballistic, etc.), face profile
(flat face, concave, convex, etc.), and flushing holes.
• Medium to large size drilling diameters
• Works in high pressure range, capable of drilling deep hole
lengths
Competitive Advantage
• High grade tungsten carbide inserts
• Bit bodies manufactured from high grade steel and processed using
state-of-the-art CNC machinery and heat treatment
Applications of DTH Bit
• Underground mining
• Tunneling
• Quarry benching operations
Specification of DTH Bits
Low Air Pressure DTH Bits | |||||
| Type | Diameter(mm) | Buttons | Flushing Holes | |
Front(No*mm) | Gauge(No.*mm) | ||||
1 | CIR80 | 80 | 2*12, 2*12 | 6*13 | 2 |
2 | CIR90 | 90 | 4*12 | 6*14 | 3 |
3 | 93 | 4*12 | 6*14 | 3 | |
4 | 95 | 4*12 | 6*14 | 3 | |
3" High Pressure DTH Bits | |||||
| Type | Diameter(mm) | Buttons | Flushing Holes | |
Front(No*mm) | Gauge(No.*mm) | ||||
1 | DHD3.5 / M30 | 90 | 4*12, 2*12 | 8*12 | 2 |
2 | 95 | 4*12, 2*12 | 8*12 | 2 | |
3 | 100 | 4*13, 2*13 | 8*13 | 2 | |
4 | 105 | 4*14, 2*14 | 8*14 | 2 | |
4" High Pressure DTH Bits | |||||
| Type | Diameter(mm) | Buttons | Flushing Holes | |
Front(No*mm) | Gauge(No.*mm) | ||||
1 | DHD340 / SD4 / QL40 / M40 | 110 | 4*14, 2*14 | 8*14 | 2 |
2 | 115 | 4*14, 2*14 | 8*14 | 2 | |
3 | 121 | 4*14, 2*14 | 8*14 | 2 | |
4 | 127 | 4*14, 3*14 | 8*14 | 2 | |
5 | 130 | 4*14, 3*14 | 8*16 | 2 | |
6 | 133 | 4*14, 3*14 | 8*16 | 2 | |
5" High Pressure DTH Bits | |||||
| Type | Diameter(mm) | Buttons | Flushing Holes | |
Front(No*mm) | Gauge(No.*mm) | ||||
1 | DHD350 / SD5 / QL50 / M50 | 130 | 3*14, 4*14 | 9*16 | 2 |
2 | 133 | 3*14, 4*14 | 9*16 | 2 | |
3 | 140 | 3*16, 4*16 | 9*16 | 3 | |
4 | 146 | 3*16, 4*16 | 9*16 | 3 | |
5 | 152 | 3*16, 5*16 | 9*18 | 3 | |
6" High Pressure DTH Bits | |||||
| Type | Diameter(mm) | Buttons | Flushing Holes | |
Front(No*mm) | Gauge(No.*mm) | ||||
1 | DHD360 / SD6 / QL60 / M60 | 152 | 4*16, 4*16 | 8*18 | 2 |
2 | 155 | 4*16, 4*16 | 8*18 | 2 | |
3 | 159 | 4*16, 4*16 | 8*18 | 2 | |
4 | 165 | 4*16, 4*16 | 8*18 | 2 | |
5 | 172 | 4*18, 4*18 | 8*18 | 2 | |
6 | 178 | 4*18, 4*18 | 8*18 | 2 | |
7 | 190 | 3*18, 5*18 | 9*18 | 3 | |
8 | 203 | 3*18, 6*18 | 9*18 | 3 | |
8" High Pressure DTH Bits | |||||
| Type | Diameter(mm) | Buttons | Flushing Holes | |
Front(No*mm) | Gauge(No.*mm) | ||||
1 | DHD380 / SD8 / QL80 / M80 | 200 | 6*18, 6*18 | 9*18 | 3 |
2 | 203 | 6*18, 6*18 | 9*18 | 3 | |
3 | 216 | 6*18, 6*18 | 9*18 | 3 | |
4 | 219 | 6*18, 6*18 | 9*18 | 3 | |
5 | 222 | 6*18, 9*18 | 9*18 | 3 | |
6 | 226 | 3*18, 5*18 | 12*18, 6*18 | 3 | |
7 | 229 | 3*18, 5*18 | 12*18, 6*18 | 3 | |
8 | 241 | 3*18, 5*18 | 12*18, 6*18 | 3 | |
9 | 251 | 3*18, 6*18 | 12*18, 6*18 | 3 | |
10 | 254 | 3*18, 7*18 | 12*18, 6*18 | 3 | |
11 | 270 | 3*18, 8*18 | 12*18, 6*18 | 3 | |
12 | 305 | 6*18, 8*18 | 12*18, 9*18 | 3 | |
Technical Manual of DTH Hammer
Low Pressure DTH Hammer | Model | Drilling Diameter (mm) | Hammer Length (mm) | External Diameter (mm) | Working Pressure (Mpa) | Air Consumption (m3/min) | Torque (N.m) | Impact Frequency (n/min) |
1 | DTH65B | ø68 - 70 | 745 | ø61.2 | 0.5 - 0.7 | 2.5 | 51 | ≥810 |
2 | DTH70 | ø72 - 74 | 803 | ø67.2 | 0.5 - 0.7 | 3 | 70 | ≥810 |
3 | DTH76 | ø74 - 76 | 766 | ø67.2 | 0.5 - 0.7 | 3 | 75 | ≥810 |
4 | DTH80 | ø80 - 82 | 796 | ø72 | 0.5 - 0.7 | 5 | 81 | ≥800 |
5 | DTH80-II | ø75 - 80 | 756 | ø67 | 0.5 - 0.7 | 3 | 75 | ≥810 |
6 | DTH80X | ø80 - 82 | 756 | ø72 | 0.5 - 0.7 | 4.5 | 75 | ≥800 |
7 | DTH80XD | ø80 - 90 | 735 | ø74 | 0.5 - 0.7 | 5.5 | 85 | ≥800 |
8 | DTH90 | ø90 - 130 | 796 | ø80.2 | 0.5 - 0.7 | 6 | 110 | ≥820 |
9 | DTH90-I | ø90 - 130 | 796 | ø80 | 0.5 - 0.7 | 5.5 | 120 | ≥820 |
10 | DTH110 | ø110 - 150 | 838 | ø98 | 0.5 - 0.7 | 11 | 180 | ≥830 |
11 | DTH150 | ø150 - 185 | 908 | ø137 | 0.5 - 0.7 | 17 | 340 | ≥800 |
12 | DTH170 | ø170 - 250 | 1023 | ø156 | 0.5 - 0.7 | 19.5 | 420 | ≥790 |
High Pressure DTH Hammer | Model | Drilling Diameter (mm) | Hammer Length (mm) | External Diameter (mm) | Working Pressure (Mpa) | Air Consumption (m3/min) | Torque (N.m) | Impact Frequency (n/min) |
1 | DTH330 | ø82 - 85 | 867 | ø71 | 0.8 - 2.1 | 3 - 12 | 150 | ≥800 |
2 | DTH335 | ø90 - 93 | 908 | ø81 | 0.8 - 2.1 | 4.3 - 14.2 | 205 | 950 - 1500 |
3 | DTH340 | ø105 - 130 | 1052 | ø92 | 0.8 - 2.1 | 3.5 - 18 | 304 | ≥800 |
4 | DTH345 | ø105 - 130 | 1034 | ø98 | 0.8 - 2.1 | 3.5 - 15 | 335 | ≥800 |
5 | DTH345K | ø110 - 130 | 994 | ø98 | 0.8 - 2.1 | 3.5 - 15 | 400 | ≥820 |
6 | DTH350 | ø130 - 152 | 1387 | ø114 | 0.8 - 2.1 | 5.7 - 18 | 590 | 810 - 1470 |
7 | DTH355 | ø130 - 152 | 1220 | ø124 | 0.8 - 2.1 | 6.5 - 18 | 700 | 810 - 1500 |
8 | DTH355K | ø130 - 152 | 1098 | ø124 | 0.8 - 2.1 | 4.5 - 18 | 800 | 840 - 1500 |
9 | DTH360 | ø152 - 305 | 1450 | ø136 | 0.8 - 2.1 | 8.5 - 25 | 822 | 820 - 1475 |
10 | DTH380 | ø203 - 350 | 1551 | ø181 | 0.8 - 2.1 | 12 - 31 | 1560 | 860 - 1510 |
11 | DTH3120 | ø302 - 508 | 1934 | ø275 | 0.8 - 2.1 | 14 - 45 | 2410 | 980 - 1446 |
